May 30, 201610 yr Hello, This is my first time using unRAID and my experience is relatively limited in these matters, but hopefully you can help me! I have a supermicro server (MB: X10DRi-T) with the disks being connected through a raid card (LSI MegaRAID 9280-4i4e). We bought a Lime-Tech USB stick with a Pro license and it boots fine, but it can't see the disks as available to add to the unRAID array. After setting the server bios to AHCI mode or IDE or even RAD and defining some hardware arrays, the OS still doesn't see anything. So I have a few questions on my mind on what might be happening: - Does unRAID require new drivers for my particular card? - If so: do I need to rebuild the kernel or is there a simpler way to add drivers? - If not, will I need to flash my card into IT mode to be able to see the disks as JBOD? Any help would be greatly appreciated! Thank you!
May 30, 201610 yr See here (Search is your friend): http://lime-technology.com/forum/index.php?topic=29091.msg260020#msg260020 While is not the extra part number but it should give you a starting point.
May 30, 201610 yr Author Thanks, that's quite helpful! I'd did a few searches but didn't find that thread! Thanks a lot.
Archived
This topic is now archived and is closed to further replies.