JohanSF Posted September 9, 2021 Share Posted September 9, 2021 I have the exact same issue as ExXxtr3me and SuperWiener. Quote Link to comment
TexasUnraid Posted September 9, 2021 Share Posted September 9, 2021 good to know to skip this update. This is why I wish I could disable the automatic update check. I don't update what works fine lol. Quote Link to comment
SuperWiener Posted September 9, 2021 Share Posted September 9, 2021 2 hours ago, TexasUnraid said: good to know to skip this update. This is why I wish I could disable the automatic update check. I don't update what works fine lol. Most images have multiple tags. If you wish to stay on a specific version just set the tag you wish to stay on instead of having it on the latest. Quote Link to comment
soluslunes Posted September 9, 2021 Share Posted September 9, 2021 Glad it's not just me- time to shift to an earlier version. Quote Link to comment
TexasUnraid Posted September 9, 2021 Share Posted September 9, 2021 2 hours ago, SuperWiener said: Most images have multiple tags. If you wish to stay on a specific version just set the tag you wish to stay on instead of having it on the latest. True, I have done this on containers that I know will break if updated but maybe it is worth it to do most of them. Quote Link to comment
stFfn Posted September 9, 2021 Share Posted September 9, 2021 i had the same issue. after the latest update netdata didnt work. everyone who has the same issue just go back go the version before. netdata/netdata:v1.31.0 1 Quote Link to comment
Shaggy433 Posted September 9, 2021 Share Posted September 9, 2021 13 hours ago, SuperWiener said: Hey all, Same thing is happening to me. Had Netdata working for a few months until last night's update. Am able to provide additional details if necessary. Same thing happening with mine.... Quote Link to comment
roland Posted September 10, 2021 Author Share Posted September 10, 2021 Just updated to the latest release and it is working ... 1 Quote Link to comment
worldspawn Posted October 19, 2021 Share Posted October 19, 2021 I installed the docker just now, but when I open the webUI, it's just a blank page that says 'Netdata, realtime monitoring done right' in the background. Is there something I'm missing here? Quote Link to comment
Arbadacarba Posted October 22, 2021 Share Posted October 22, 2021 I'm trying to set up some custom dashboards and getting this when I go to the default address... I looked through the forum but didn't see anything... Any thoughts? Thanks Quote Link to comment
Arbadacarba Posted October 26, 2021 Share Posted October 26, 2021 Error 101: Cannot Load JQuery I found the cause and a solution: The version of jquery on the netdata docker is 3.6.0 and while it seams like a newer version should work....it doesn't. So I created a path that adds 2.2.4 to the folder from another netdata install (installed on my pfsense box) Quote Link to comment
tomfowler Posted November 3, 2021 Share Posted November 3, 2021 Good evening (at least where I am): I love this software and the beautiful graphs it creates. The only thing I haven't figured out is how to enable IPMI monitoring. I know it is available, because I have been successful in getting the ultimate unraid dashboard working and I can see data in my unRAID dashboard. However, I can't seen to find any instructions on how to enable the freeipmi.plugin. Quote Link to comment
roland Posted November 3, 2021 Author Share Posted November 3, 2021 1 hour ago, tomfowler said: Good evening (at least where I am): I love this software and the beautiful graphs it creates. The only thing I haven't figured out is how to enable IPMI monitoring. I know it is available, because I have been successful in getting the ultimate unraid dashboard working and I can see data in my unRAID dashboard. However, I can't seen to find any instructions on how to enable the freeipmi.plugin. I am not using this plugin, but have you seen this explanation? https://github.com/netdata/netdata/issues/6681 1 Quote Link to comment
tomfowler Posted November 3, 2021 Share Posted November 3, 2021 Wow. Thank you. I was able to use the remote monitoring option of the plugin, which worked perfectly. For those who are wondering, I passed command line options in netdata.conf to my IPMI "host" IP address, along with my normal username and password to access the IPMI interface on the LAN. I have a Supermicro X10 board. Appreciate the help! I had missed that option before. Quote Link to comment
tomfowler Posted November 8, 2021 Share Posted November 8, 2021 (edited) OK, so the plot thickens. Thanks to @roland, I made this work on my X10 board. Needing more power, I switched unRAID over to a dual E5 Supermicro X9 board this weekend. Everything works, expect IPMI no longer feeds netdata. I was about ready to post this question over at the netdata forums, but thought it may be more appropriate here. ## Environment unRAID 6.9.2, using the Netdata app via the Community Plugins app which uses the official Netdata docker image Netdata reports version v1.31.0-476-nightly Supermicro X9DRi-LN4F+ (BIOS 3.61 dated January 2020) with twin E5-2667v2, 64GB of RAM Configured (successfully in the past with different hardware) to access IPMI via the BMC using the following configuration settings in netdata.conf: As a side note that may be helpful to troubleshooting, I am successfully pulling data from the system IPMI using the unRAID IPMI plugin and that data is moving from Telegraf to Influxdb and finally to Grafana. However, I prefer to use Netdata as my sole monitoring agent. This is the only thing holding me back. Uncommented the freeipmi plugin line in the plugins section. I don't think this is since the intro to the configuration file says these are all the default values: # charts.d = yes # fping = yes freeipmi = yes # go.d = yes Provided specific commands to access remote server: [plugin:freeipmi] update every = 10 command options = driver-type LAN_2_0 hostname 10.1.1.8 username myusername password mypassword ## Problem/Question I switched from an X10SL7-F motherboard with an E3-1231v3 to the subject motherboard. IPMI was successfully feeding Netdata. With no configuration changes, I moved the unRAID USB stick and five drives to the new machine. All came back up as expected, with the exception of IPMI no longer works in Netdata. ## What I expected to happen Given that the IPMI data is successfully being harvested by unRAID and sent via Telegraf to an InfluxDB and Grafana instance, I have to think it is a specific issue with the remote access configuration to the specific board. I have verified on the Supermicro website, that this board is IPMI 2.0 compatible I have tried to use the command line to gain additional information on debugging reading through the netdata learn webpage, and it is pasted below: /usr/libexec/netdata/plugins.d # ./freeipmi.plugin driver-type LAN_2_0 hostname 10.1.1.8 username myusername password mypassword 2021-11-08 22:10:53: freeipmi.plugin ERROR : MAIN : ipmi_monitoring_sensor_readings_by_record_id(): connection timeout 2021-11-08 22:10:53: freeipmi.plugin FATAL : MAIN : freeipmi.plugin: data collection failed. # : Invalid argument The odd thing is that the response is exactly the same if I provide an IP address of a different computer that doesn't have IPMI/BMC. I have also tried the "debug" option and I haven't been able to gain any helpful information there. I have the default unRAID container settings, which has the network set to "host". I am unable to ping the IPMI address, which may be the root of the problem. However, I used the default container settings on the other machine, so this may be a red herring. Any ideas? Thanks in advance! Edited November 8, 2021 by tomfowler Quote Link to comment
tomfowler Posted November 8, 2021 Share Posted November 8, 2021 So, for anyone else here trying to solve this problem, I figured it out. Essentially, the X9 boards are unable to talk to themselves through the shared IPMI/BMC and LAN port. The ping problem was key. I could ping every network address except the unRAID server and the IPMI address. This website here describes the issue in detail. All I had to do was connect another cable to the dedicated IPMI port and into the switch. Then change the setting from shared to dedicated on the network page in IPMI configuration. Boom, netdata immediately started picking up IPMI data. Apparently, the X10 boards are able to do this on one cable. 1 Quote Link to comment
mikro Posted November 9, 2021 Share Posted November 9, 2021 On 10/19/2021 at 7:10 PM, worldspawn said: I installed the docker just now, but when I open the webUI, it's just a blank page that says 'Netdata, realtime monitoring done right' in the background. Is there something I'm missing here? Same, and this worked for me: On 9/9/2021 at 9:01 PM, stFfn said: i had the same issue. after the latest update netdata didnt work. everyone who has the same issue just go back go the version before. netdata/netdata:v1.31.0 Quote Link to comment
doubleopinter Posted November 22, 2021 Share Posted November 22, 2021 Does this docker have the ability to connect to the netdata cloud? I've been trying to figure out how to do that. Quote Link to comment
OdinEidolon Posted December 2, 2021 Share Posted December 2, 2021 Hi and thanks for this docker template! I am trying to add settings to the `/override` folder, correctly mounted to `/etc/netdata/override` as per template default variables. I'd like to add simple settings that apply to `netdata.conf`, such as `hostname = hello-world`, without having to modify the `netdata.conf` file manually. Is that possible, or are `override` config only available for alarms and such? I can't find any documentation about that. Quote Link to comment
OdinEidolon Posted December 11, 2021 Share Posted December 11, 2021 On 12/2/2021 at 7:20 PM, OdinEidolon said: Hi and thanks for this docker template! I am trying to add settings to the `/override` folder, correctly mounted to `/etc/netdata/override` as per template default variables. I'd like to add simple settings that apply to `netdata.conf`, such as `hostname = hello-world`, without having to modify the `netdata.conf` file manually. Is that possible, or are `override` config only available for alarms and such? I can't find any documentation about that. Bump! Quote Link to comment
OdinEidolon Posted December 18, 2021 Share Posted December 18, 2021 On 12/2/2021 at 7:20 PM, OdinEidolon said: Hi and thanks for this docker template! I am trying to add settings to the `/override` folder, correctly mounted to `/etc/netdata/override` as per template default variables. I'd like to add simple settings that apply to `netdata.conf`, such as `hostname = hello-world`, without having to modify the `netdata.conf` file manually. Is that possible, or are `override` config only available for alarms and such? I can't find any documentation about that. Still doubtful on how I'd do that. There must be a simple way! Creating a custom `/etc/netdata/override/netdata.conf` does not work, and modifying the default file is overwritten on every container update. I guess one could add a path to the docker container template, but it does not seem like a proper solution to me. Quote Link to comment
writablevulture Posted December 19, 2021 Share Posted December 19, 2021 Initially Netdata was working well for me but I have now noticed that every time after the container image is updated I get an Executiion error = Error code 403. After reading around I a have managed to fix this by performing: docker network disconnect host Netdata ...and I can then start the container normally. All is well until the container image next gets updated and I have to do this again. This only happens with this particular container. Does anyone know why this might be happening? Thanks! Quote Link to comment
writablevulture Posted December 22, 2021 Share Posted December 22, 2021 On 12/19/2021 at 12:50 PM, writablevulture said: Initially Netdata was working well for me but I have now noticed that every time after the container image is updated I get an Executiion error = Error code 403. After reading around I a have managed to fix this by performing: docker network disconnect host Netdata ...and I can then start the container normally. All is well until the container image next gets updated and I have to do this again. This only happens with this particular container. Does anyone know why this might be happening? Thanks! This has happedned again. This time I include full diagnostics immedately after I see the 403 error in case anyone can help me shed some light on this please. Thank you! tower-diagnostics-20211222-1410.zip Quote Link to comment
Squid Posted December 23, 2021 Share Posted December 23, 2021 23 hours ago, writablevulture said: This has happedned again. This time I include full diagnostics immedately after I see the 403 error in case anyone can help me shed some light on this please. Thank you! tower-diagnostics-20211222-1410.zip 296.12 kB · 0 downloads Post the template for Netdata from /config/plugins/dockerMan/templates-user on the flash drive Quote Link to comment
writablevulture Posted December 23, 2021 Share Posted December 23, 2021 8 hours ago, Squid said: Post the template for Netdata from /config/plugins/dockerMan/templates-user on the flash drive Thank you for looking. my-netdata.xml Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.