chvb Posted June 5, 2016 Share Posted June 5, 2016 (edited) Support thread for: Docker Container: -DVBLink -Kerio Connect -Apache-PHP -Webgrabplus -TVHProxy Template: -Collabora/Code Repository: https://github.com/chvb/docker-templates Docker Hub: https://hub.docker.com/u/chvb/ GitHub: https://github.com/chvb Edited September 10, 2017 by chvb added new Docker Container Quote Link to comment
chvb Posted June 10, 2016 Author Share Posted June 10, 2016 (edited) Some things have to be done to use the DVBLink: 1. Install your DVBDriver with the Plugin of CHMB: http://lime-technology.com/forum/index.php?topic=47899.0 Edit the DVBLInk Docker with Advanced Display and add these Extra Parameters: --device=/dev/dvb Remember: don't forget to reboot your System: If you are using SATIP you have to set the Docker to "Host" mode Network Type: Host Remember: Set the Recording path inside the DVBLink configuration Recording path: /recordings/ DVBLink - DVBAPI - Softcam Starting from build 14061/14072/14073 DVBLink TVSource supports new plugin interface, called mdjapi. The plugins are only supported on intel-based platforms - e.g. Windows, Ubuntu, MacOS, all intel-based NAS models.The plugin spec comes from the original acamd author and was recently published here (spec is in English, site is in Dutch):https://www.sat4all.com/forums/topic/23 ... &p=2430476Another group of developers was working on the implementation of mdjapi for DVBLink. I have seen the pre-built binaries on a filedrop site at the following link (I do not know how long they will stay there):http://dropmefiles.com/B47VMThe plugins have to be put into <dvblink share directory>/mirror/sources/<your tvsource source>/plugins. Some things to the Kerio Connect Docker: If you want to manage the Docker, you can connect to the Docker with Putty / WinSCP Username: Docker PW: test123 //Change your Path for Mailstore inside the Docker / initial setup change it to: /kerio_store // How to update Kerio Docker You have to remove kerio files/folders in your volume but keep this follow files/folder: (The docker will copy the missing Files) *.cfg mailserver/store mailserver/dbSSL mailserver/license mailserver/settings mailserver/sslca mailserver/sslcert mailserver/ldapmap // How can i Replace a Backup? // Log into SSH and Replace Backup sudo service kerio-connect stop sudo /opt/kerio/mailserver/kmsrecover /backup sudo service kerio-connect start Edited June 13, 2017 by chvb Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 Hi, Thanks for the DVBlink docker I've used dvblink successfully on windows with my hardware but the docker isn't recognising my tuner. It's an external tuner connected by USB. Any advice? Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 Hi, Thanks for the DVBlink docker I've used dvblink successfully on windows with my hardware but the docker isn't recognising my tuner. It's an external tuner connected by USB. Any advice? Are drivers installed for your tuner? See my sig for Unraid DVB.. Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 of course.. drivers.. It's a technotrend TT-connect 4600.. i'll go and look for them **edit** found the correct driver files here... anyonw fancy giving me a heads up on how to install them? https://bitbucket.org/liplianin/s2-liplianin-v37/get/67ce08afdbe7.tar.bz2 Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 of course.. drivers.. It's a technotrend TT-connect 4600.. i'll go and look for them **edit** found the correct driver files here... anyonw fancy giving me a heads up on how to install them? https://bitbucket.org/liplianin/s2-liplianin-v37/get/67ce08afdbe7.tar.bz2 Hi, Thanks for the DVBlink docker I've used dvblink successfully on windows with my hardware but the docker isn't recognising my tuner. It's an external tuner connected by USB. Any advice? Are drivers installed for your tuner? See my sig for Unraid DVB.. Quote Link to comment
chvb Posted June 12, 2016 Author Share Posted June 12, 2016 of course.. drivers.. It's a technotrend TT-connect 4600.. i'll go and look for them **edit** found the correct driver files here... anyonw fancy giving me a heads up on how to install them? https://bitbucket.org/liplianin/s2-liplianin-v37/get/67ce08afdbe7.tar.bz2 please sure you make these steps: 1. Install your DVBDriver with the Plugin of CHMB: http://lime-technology.com/forum/index.php?topic=47899.0 Edit the DVBLInk Docker with Advanced Display and add these Extra Parameters: --device=/dev/dvb Edit your /boot/config/go file and add these line: chown -R nobody:users /dev/dvb & Remember: don't forget to reboot your System: Quote Link to comment
saarg Posted June 12, 2016 Share Posted June 12, 2016 of course.. drivers.. It's a technotrend TT-connect 4600.. i'll go and look for them **edit** found the correct driver files here... anyonw fancy giving me a heads up on how to install them? https://bitbucket.org/liplianin/s2-liplianin-v37/get/67ce08afdbe7.tar.bz2 please sure you make these steps: 1. Install your DVBDriver with the Plugin of CHMB: http://lime-technology.com/forum/index.php?topic=47899.0 Edit the DVBLInk Docker with Advanced Display and add these Extra Parameters: --device=/dev/dvb Edit your /boot/config/go file and add these line: chown -R nobody:users /dev/dvb & Remember: don't forget to reboot your System: I'm pretty sure the chown in the go file isn't needed as it's done by the unraid dvb plugin. I'm sure mister dvb can confirm it Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 Yep the chown is done by the plugin. Not necessary. Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 OK..thanks.. but following the instructions i'm getting "" root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="DVBLink" --net="bridge" -e TZ="Europe/London" -p 39876:39876/tcp -p 8100:8100/tcp -p 2222:22/tcp -v "/mnt/user/Recordings":"/recordings":rw --device=/dev/dvb chvb/docker-dvblink 18f28a73ca18c618ca61d8e3b001bd92023eca3c4a98ea5c0ce61cf99448f07a Error response from daemon: Cannot start container 18f28a73ca18c618ca61d8e3b001bd92023eca3c4a98ea5c0ce61cf99448f07a: error gathering device information while adding custom device "/dev/dvb": lstat /dev/dvb: no such file or directory The command finished successfully! Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 OK..thanks.. but following the instructions i'm getting "" root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="DVBLink" --net="bridge" -e TZ="Europe/London" -p 39876:39876/tcp -p 8100:8100/tcp -p 2222:22/tcp -v "/mnt/user/Recordings":"/recordings":rw --device=/dev/dvb chvb/docker-dvblink 18f28a73ca18c618ca61d8e3b001bd92023eca3c4a98ea5c0ce61cf99448f07a Error response from daemon: Cannot start container 18f28a73ca18c618ca61d8e3b001bd92023eca3c4a98ea5c0ce61cf99448f07a: error gathering device information while adding custom device "/dev/dvb": lstat /dev/dvb: no such file or directory The command finished successfully! This makes me think there aren't drivers installed for your device, look at the DVB Plugins screen and tell me what you see in the bottom left column.... Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 Attached... Can't see my technotrend 4600 tuner. Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 Attached... Can't see my technotrend 4600 tuner. Well the drivers are included in kernel according to this. But V6.1.9 runs on 4.1.18 and seems there were some fixes after that in the 4.2 kernel. As much as I don't like recommending beta versions, you may want to try the V6 Beta 23 release, which is kernel 4.4.13. Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 You could also try the Digital Devices Mediabuild and see if the drivers are in there. Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 Thank you - i'll try DD as i can't see any beta options. Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 Thank you - i'll try DD as i can't see any beta options. There are beta options available but you need to read my plugin post to see how to upgrade to the beta stream. Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 OK.. thank you for your help. I'm very new to unraid and still finding my feet - so i do appreciate your patience. I don't quite understand "you must first upgrade via the LimeTech plugin or manually" ? Quote Link to comment
CHBMB Posted June 12, 2016 Share Posted June 12, 2016 OK.. thank you for your help. I'm very new to unraid and still finding my feet - so i do appreciate your patience. I don't quite understand "you must first upgrade via the LimeTech plugin or manually" ? I won't let my plugin update people to beta without them already having done so first via the official LT Beta. There are other changes the beta upgrade does that doesn't get replicated by my plugin. So to use a beta DVB build you first have to update via the LT plugin. Here's the latest one for Beta 23. Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 Thanks. Updated to beta, tried OE and DD builds - no joy. removed all plugins /apps and downgraded to beta 22. Reinstalled plex/dvblink/ OE 6.2.0-beta22. Still no joy. "DVB Adapter Drivers: Not Detected" output from dmesg upon removal/insert of TechnoTrend TT-connect S2-4600 [ 676.668768] usb 1-1.6: USB disconnect, device number 4 [ 1861.951305] usb 4-1: new high-speed USB device number 2 using xhci_hcd [ 1862.072835] dw2102: su3000_identify_state [ 1862.072838] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state. [ 1862.072843] dw2102: su3000_power_ctrl: 1, initialized 0 [ 1862.072992] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1862.073265] DVB: registering new adapter (TechnoTrend TT-connect S2-4600) [ 1862.078402] dvb-usb: MAC address: bc:ea:2b:46:12:85 [ 1862.383774] i2c i2c-1: Added multiplexed i2c bus 2 [ 1862.397265] ts2020 2-0060: Montage Technology TS2022 successfully identified [ 1862.397282] usb 4-1: DVB: registering adapter 1 frontend 0 (Montage Technology M88DS3103)... [ 1862.419326] Registered IR keymap rc-tt-1500 [ 1862.419459] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb4/4-1/rc/rc0/input7 [ 1862.419582] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb4/4-1/rc/rc0 [ 1862.419585] dvb-usb: schedule remote query interval to 250 msecs. [ 1862.419588] dw2102: su3000_power_ctrl: 0, initialized 1 [ 1862.419590] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected. [ 1864.670347] dvb-usb: recv bulk message failed: -110 [ 1864.670350] dw2102: i2c transfer failed. Any ideas? Quote Link to comment
djcslip Posted June 12, 2016 Share Posted June 12, 2016 I have no idea what has happened - but it is now working. thank you. Quote Link to comment
chvb Posted June 13, 2016 Author Share Posted June 13, 2016 Yep the chown is done by the plugin. Not necessary. Nice to know. Thanks. Quote Link to comment
fastknight Posted June 13, 2016 Share Posted June 13, 2016 Support thread for DVBLink, Kerio Connect & Apache-PHP Docker So I started using this Docker which looks really cool, but I had a couple of questions as I don't think its working quite right? 1. Initial install works great - but if I stop the Docker and Start again I never get the WebUI back again? It works great all the way up to me needing to stop/or restart then it never comes back. 2. Where is the config saved? Any updates to the Docker such as changing between Host/Bridge mode reset the Dvblink config. Realise this is still very early - but would appreciate help with this as its working great with my DVB drivers build of Unraid. Thanks, Quote Link to comment
DZMM Posted February 14, 2017 Share Posted February 14, 2017 hi I can't get this docker to load with the default settings - help please. I can't get the webui to load so I'm at stage 1.... I've had a few frustrating hours with tvheadend and I want to give this a go as I've used DVBlink in the past Quote Link to comment
DZMM Posted February 16, 2017 Share Posted February 16, 2017 can anyone help please? I've got it running perfectly in a VM, but I'd rather run in the docker for obvious reasons. Quote Link to comment
mbc0 Posted February 18, 2017 Share Posted February 18, 2017 No activity on this thread since June, Docker last updated in June and your question is unanswered, looking like this is dead project :-( Just thought I would have a go with this as I am suffering a pixelation issue when cpu is stressed but cannot get the WEBUI either Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.