saarg Posted January 21, 2018 Share Posted January 21, 2018 3 minutes ago, spazmc said: How hard would it be to convert from tobbend"s webgrab+plus to yours? This program is a pain to setup.I still do not have it fully functional. Can I keep existing config or save the Few modified file and drop them in? What is wrong with mine?? Quote Link to comment
spazmc Posted January 21, 2018 Share Posted January 21, 2018 (edited) LOL. nothing it works. Looking for most recent version. Not shure how often this sort of thing gets updated. The program I was using stopped working. And Webgrab+plus is a major pain to setup. Edited January 21, 2018 by spazmc Quote Link to comment
jteeuw Posted January 22, 2018 Share Posted January 22, 2018 Hi, Can you please upgrade the webgrab docker. I get a a error : Quote SW V2.1 should be >= SiteIni V2.1.4: Upgrade your WebGrab+Plus version to V2.1.4 or higher!! @http://www.webgrabplus.com/download Quote Link to comment
manolodf Posted January 23, 2018 Share Posted January 23, 2018 (edited) Hi, I am trying to install the TVhproxy docker, and well I would love to getting to the part where I run into a mistake I made on the docker to get it working, but at the moment trying to install the docker just gives me a blank page. No matter if I set it as Host, Bridge or assign new IP I just cannot get the docker to install, just a blank page. I have attempted every network type, I have attempted also to manually assign ports 80 and 5004, I have set the correct username and password and IP of tvheadend. Not sure if this is a cause or something, but something I found strange is that when I click on "Show deployed host ports" and "Show deployed ip addresses" it just does not show anything, unlike other dockers that do show me all the ports I have used up. Is there something else I need to have in unraid network settings by chance? Let me know if there is anything I can supply to help diagnose. I do see this in the log files: Jan 22 21:18:50 Tower root: error: /Apps/AddContainer?xmlTemplate=default:/tmp/community.applications/tempFiles/templates-community-apps/9.xml: missing csrf_tokenJan 22 21:19:55 Tower root: error: /Apps/AddContainer?xmlTemplate=default:/tmp/community.applications/tempFiles/templates-community-apps/9.xml: missing csrf_token Edited January 23, 2018 by manolodf Found something in log files 1 Quote Link to comment
DMcK Posted January 23, 2018 Share Posted January 23, 2018 On 21/01/2018 at 11:26 AM, saarg said: What is wrong with mine?? It uses version 1.57 of WG++ and doesn't work with some of the newer sites.ini Quote Link to comment
Slimone Posted February 3, 2018 Share Posted February 3, 2018 Hey Everyone, I'm experiencing the same issue as manolodf Any help with this would be greatly appreciated Thanks in advance Quote Link to comment
captain134 Posted February 11, 2018 Share Posted February 11, 2018 I am not able to get tvhProxy to work. I have assigned plex, tvheadend and tvhproxy their own ips. I have tried many different configs but get the same 500 internal server error. ANY help would be greatly appreciated. Thanks in advance. Quote Link to comment
manolodf Posted February 12, 2018 Share Posted February 12, 2018 I am not that familiar with it, but I do see it says port 80 MUST be set as port 80, so perhaps your changing of the port is causing an issue? I did get a post on the linuxserver.io forum about a docker called Telly, it may work better? https://forum.linuxserver.io/thread-464-post-2925.html#pid2925 Another one I tried was Antennas which had a more visible GUI. https://hub.docker.com/r/thejf/antennas/~/dockerfile/ Quote Link to comment
manolodf Posted February 13, 2018 Share Posted February 13, 2018 (edited) On 2/3/2018 at 2:40 PM, Slimone said: Hey Everyone, I'm experiencing the same issue as manolodf Any help with this would be greatly appreciated Thanks in advance Have you checked out the Telly container someone created? It basically is an all in one that seems to have potential. Edited February 21, 2018 by manolodf added link 1 Quote Link to comment
mbc0 Posted March 13, 2018 Share Posted March 13, 2018 Hi, I am having difficulty trying to get this to work, occasionally if I reboot Plex I see a telly tuner available but it quickly disappears. I have Plex in Host Mode and have tried telly in bridge and br0 with no luck. If I manually enter the IP and port into Plex when in br0 mode nothing is found here is my log, should it be 0.0.0.0:6077 even if I enter an IP in br0 mode? [telly] [info] booting telly v0.4.5[telly] [info] Downloading file(deleted intentionally.m3u[telly] [info] Reading m3u file /telly.m3u...[telly] [warning] telly is not attempting to strip out unneeded channels, please use the flag -filterregex if telly returns too many channels[telly] [info] telly is currently not filtering for only uk television. if you would like it to, please use the flag -uktv[telly] [info] found 80 channels[telly] [info] creating discovery data[telly] [info] creating lineup status[telly] [info] creating device xml[telly] [info] creating webserver routes[telly] [info] Building lineup[telly] [info] listening on 0.0.0.0:6077 Quote Link to comment
manolodf Posted March 13, 2018 Share Posted March 13, 2018 I think that is just the UPNP, so if you manually enter the address and port you should be able to hit continue and it should work. go to youripaddress:6077/lineup.json and make sure channel list is there. On plex just hit continue even though you dont see it, it may just work. Post on the Telly support thread as Tom and them are very good at helping. Quote Link to comment
nexusle Posted April 9, 2018 Share Posted April 9, 2018 I'd installed the DVBLink docker on Openmediavault 3 (Debian) but couldn't connect to the server with ports 39876 and/or 8100 I'd linked all three volumes I'd set HOST network I'd set PUID and GUID to root Can anyone help? Quote Link to comment
Rick Gillyon Posted April 23, 2018 Share Posted April 23, 2018 Setting up Plex DVR with two types of input, so I need to select 2 different EPGs. Can I create 2 instances of the docker on separate IPs, so I can add 2 "tuners"? Quote Link to comment
itsdandandan Posted May 13, 2018 Share Posted May 13, 2018 Has anyone got TVHProxy working? Mine never seems to get an IP. Quote Link to comment
Rick Gillyon Posted May 13, 2018 Share Posted May 13, 2018 25 minutes ago, itsdandandan said: Has anyone got TVHProxy working? Mine never seems to get an IP. It never shows the IP, but if you specify the fixed IP it uses it. It works for me. Quote Link to comment
mbc0 Posted May 13, 2018 Share Posted May 13, 2018 Tried quite a few times, can never get it to work... it's a shame as I am running an Ubuntu VM just for tvhProxy! Quote Link to comment
NewDisplayName Posted May 13, 2018 Share Posted May 13, 2018 Pretty sad, today i searched like 4hours for a solution to use my usb dvb stick and plex together. I cant find a single tvhproxy docker i could use correct on unraid, wtf? Oo All are in some way broken or wont even start. Quote Link to comment
Rick Gillyon Posted May 13, 2018 Share Posted May 13, 2018 16 minutes ago, mbc0 said: Tried quite a few times, can never get it to work... it's a shame as I am running an Ubuntu VM just for tvhProxy! I don't know why you would need a VM, tvhProxy and tvHeadend both work as dockers. 2 minutes ago, nuhll said: Pretty sad, today i searched like 4hours for a solution to use my usb dvb stick and plex together. I cant find a single tvhproxy docker i could use correct on unraid, wtf? Oo All are in some way broken or wont even start. This one works fine, you need to provide more information. Quote Link to comment
itsdandandan Posted May 14, 2018 Share Posted May 14, 2018 (edited) Hi Rick or anyone who can assist, can you see anything wrong with my settings? Have subbed out my username/password in the TVHeadend URL...The logs in unRAID for this container show the below. It does appear to be listening on 5004 as Plex can connect to it but I just get "There was a problem getting the channels for your device" EDIT: Changed Host Port 2 to port 80 but have the same issue still Edited May 14, 2018 by itsdandandan Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 Comparing to mine, you seem to have extra settings in tvhProxy - I don't have any host ports defined. Also, it may be worth trying it without username/password on tvhe. Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 If you dont have ports added, how can it be reachable? Oo My problem is that what ever i do (Host, br0 or bridge) there dont seem to be anything happen at the network section of the container Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 1 minute ago, nuhll said: If you dont have ports added, how can it be reachable? Oo My problem is that what ever i do (Host, br0 or bridge) there dont seem to be anything happen at the network section of the container It never shows anything in network, doesn't stop it working. It always uses the same ports, as it says in the container: "Port 80: Must be export as Port 80 Port 5004: Must be export as Port 5004" This is what the container does by default, no need to add, and you add it in Plex as 192.168.1.nn:5004. Once added Plex often says it's not found, but it still works. Quote Link to comment
itsdandandan Posted May 14, 2018 Share Posted May 14, 2018 1 hour ago, Rick Gillyon said: Comparing to mine, you seem to have extra settings in tvhProxy - I don't have any host ports defined. Also, it may be worth trying it without username/password on tvhe. Hmm removed those extra settings I added and the username/password bit but still having the same trouble when adding it. Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 You have the channels configured in tvhe? Obviously it doesn't really need to scan. I don't remember this stage, it was a few weeks ago... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.