[Support] DVBLink, Kerio Connect, Apache-php, TVHProxy, Webgrabplus


Recommended Posts

I have tried with and without password it just makes no difference.  I have tried on and off at least a dozen times over the last few months can never get it to work!  it seems that Plex cannot even see TVHProxy so don't think it has even got as far as checking the TVHProxy connection to TVHeadend?

Link to comment

I have tried 4/5 different IP's 

 

Pinging 192.168.0.41 with 32 bytes of data:
Reply from 192.168.0.41: bytes=32 time=1ms TTL=64
Reply from 192.168.0.41: bytes=32 time<1ms TTL=64
Reply from 192.168.0.41: bytes=32 time<1ms TTL=64
Reply from 192.168.0.41: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.0.41:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 1ms, Average = 0ms

Link to comment

I never saw a working docker which doesnt display any network infos, but anyway, i tried it again.


I get JUST in the logs

 

Quote

 


Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/flask/app.py", line 1982, in wsgi_app
response = self.full_dispatch_request()
File "/usr/lib/python2.7/site-packages/flask/app.py", line 1614, in full_dispatch_request
rv = self.handle_user_exception(e)
File "/usr/lib/python2.7/site-packages/flask/app.py", line 1517, in handle_user_exception
reraise(exc_type, exc_value, tb)
File "/usr/lib/python2.7/site-packages/flask/app.py", line 1612, in full_dispatch_request
rv = self.dispatch_request()
File "/usr/lib/python2.7/site-packages/flask/app.py", line 1598, in dispatch_request
return self.view_functions[rule.endpoint](**req.view_args)
File "/opt/tvhproxy/tvhProxy.py", line 73, in device
return render_template('device.xml',data = discoverData),{'Content-Type': 'application/xml'}
File "/usr/lib/python2.7/site-packages/flask/templating.py", line 133, in render_template
return _render(ctx.app.jinja_env.get_or_select_template(template_name_or_list),
File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 869, in get_or_select_template
return self.get_template(template_name_or_list, parent, globals)
File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 830, in get_template
return self._load_template(name, self.make_globals(globals))
File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 804, in _load_template
template = self.loader.load(self, name, globals)
File "/usr/lib/python2.7/site-packages/jinja2/loaders.py", line 113, in load
source, filename, uptodate = self.get_source(environment, name)
File "/usr/lib/python2.7/site-packages/flask/templating.py", line 57, in get_source
return self._get_source_fast(environment, template)
File "/usr/lib/python2.7/site-packages/flask/templating.py", line 85, in _get_source_fast
raise TemplateNotFound(template)
TemplateNotFound: device.xml
::ffff:192.168.0.107 - - [2018-05-14 13:17:12] "GET / HTTP/1.1" 500 412 0.005776
::ffff:192.168.0.107 - - [2018-05-14 13:17:12] "GET /favicon.ico HTTP/1.1" 404 342 0.006027
 

 

 

OR

 

Quote

 


 

Error grabbing logs: EOF
 

 

123.jpg

Edited by nuhll
Link to comment
1 hour ago, mbc0 said:

I am loathed to change my Plex Docker due to the amount of time/work involved in doing that!

Doesn't take that long to change a docker provider.  If it's pointing at the same appdata folder it normally only takes about 10 minutes (unless I've been lucky in the past).

Link to comment

Okay, it might have something to do with security build into dockers.

 

Im not sure tho.

 

It might be the case that bridged containers cant reach each other.

 

So i put plex, tvheadend and tvhproxy on a br0 adress. 

 

Finally no errors in logs, but it still just show up in plex, i click next it shows one transmitter "VOX" and then, it switches back to an old USB device and say it cant search for numbers.

 

BTW after EVERY test it seems you NEED to restart plex docker. 

Edited by nuhll
Link to comment
2 hours ago, nuhll said:

What did you enter in plex? 

 

IP

 

IP:PORT


of tvhproxy?!

 

i Tried both, if i manually access IP:PORT i get the error above, if i enter it in plex, nothing happens, besides plex tells me that it cant connect.. :)


Do you have plex in br0 mode?

IP:Port. Plex, tvhe and tvhProxy all need to be in br0 mode.

Link to comment
1 hour ago, nuhll said:

Okay, if im fast enaught i can select hte proxy, and see all channels, but if i click next im back to that old usb and the proxy is dissapeared... wtf?

 

DO i need to wait until tvheadend is finished with epg grabbing?

In setup it may tell you the proxy is not found, but it's still there and works. Mine shows:

image.png.ac1de30ea6bd0e55df99b5cdb1347c03.png

but it is working. EPG comes from Plex not tvhe.

Link to comment

I must say, it had worked perfectly for 7 channels (and i could watch them), but now, even with new container, i cant again... its crazy

 

it seems plex is just a piece of sh1t.


If u add somethin gmanually it says like "oh i already know that device its down" Oo WTF!

 

Does anyone know how to delete old "devices" (ip:ports) from plex?



May 14, 2018 18:01:02.240 [0x7fd65ac77700] WARN - HTTP error requesting GET http://192.168.0.10:5004/discover.json (0, No error) (Failed connect to 192.168.0.10:5004; No route to host)
May 14, 2018 18:01:02.251 [0x7fd65ac77700] ERROR - DVR:Device: Error refreshing existing device device://tv.plex.grabbers.hdhomerun/12345678, marking as dead.
 

 

(at this stage i tried to add a 192.168.0.101 as tvh proxy - its so crazy)

Edited by nuhll
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.