mbc0 Posted May 14, 2018 Share Posted May 14, 2018 No matter what I do, I cannot get Plex to see tvhproxy (this docker version) I can get it to work on an Ubuntu VM running tvhproxy though.. Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 Only difference I can see there is that you have a password on tvhe. No idea if it makes a difference though. Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 I have tried with and without password it just makes no difference. I have tried on and off at least a dozen times over the last few months can never get it to work! it seems that Plex cannot even see TVHProxy so don't think it has even got as far as checking the TVHProxy connection to TVHeadend? Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 You're certain nothing else has grabbed that IP? No firewall/security that would block it? Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 I have tried 4/5 different IP's Pinging 192.168.0.41 with 32 bytes of data: Reply from 192.168.0.41: bytes=32 time=1ms TTL=64 Reply from 192.168.0.41: bytes=32 time<1ms TTL=64 Reply from 192.168.0.41: bytes=32 time<1ms TTL=64 Reply from 192.168.0.41: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.41: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 Which Plex docker are you using? Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 ah sorry! Plex is Linuxserver Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 1 minute ago, mbc0 said: ah sorry! Plex is Linuxserver I'm using binhex-plexpass. Maybe that's the difference? Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 I am loathed to change my Plex Docker due to the amount of time/work involved in doing that! maybe someone else can confirm if TVHProxy works on linuxserver Plex Docker? Cheers for your time so far mate! 1 Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 (edited) I never saw a working docker which doesnt display any network infos, but anyway, i tried it again. I get JUST in the logs Quote Traceback (most recent call last):File "/usr/lib/python2.7/site-packages/flask/app.py", line 1982, in wsgi_appresponse = self.full_dispatch_request()File "/usr/lib/python2.7/site-packages/flask/app.py", line 1614, in full_dispatch_requestrv = self.handle_user_exception(e)File "/usr/lib/python2.7/site-packages/flask/app.py", line 1517, in handle_user_exceptionreraise(exc_type, exc_value, tb)File "/usr/lib/python2.7/site-packages/flask/app.py", line 1612, in full_dispatch_requestrv = self.dispatch_request()File "/usr/lib/python2.7/site-packages/flask/app.py", line 1598, in dispatch_requestreturn self.view_functions[rule.endpoint](**req.view_args)File "/opt/tvhproxy/tvhProxy.py", line 73, in devicereturn render_template('device.xml',data = discoverData),{'Content-Type': 'application/xml'}File "/usr/lib/python2.7/site-packages/flask/templating.py", line 133, in render_templatereturn _render(ctx.app.jinja_env.get_or_select_template(template_name_or_list),File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 869, in get_or_select_templatereturn self.get_template(template_name_or_list, parent, globals)File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 830, in get_templatereturn self._load_template(name, self.make_globals(globals))File "/usr/lib/python2.7/site-packages/jinja2/environment.py", line 804, in _load_templatetemplate = self.loader.load(self, name, globals)File "/usr/lib/python2.7/site-packages/jinja2/loaders.py", line 113, in loadsource, filename, uptodate = self.get_source(environment, name)File "/usr/lib/python2.7/site-packages/flask/templating.py", line 57, in get_sourcereturn self._get_source_fast(environment, template)File "/usr/lib/python2.7/site-packages/flask/templating.py", line 85, in _get_source_fastraise TemplateNotFound(template)TemplateNotFound: device.xml::ffff:192.168.0.107 - - [2018-05-14 13:17:12] "GET / HTTP/1.1" 500 412 0.005776::ffff:192.168.0.107 - - [2018-05-14 13:17:12] "GET /favicon.ico HTTP/1.1" 404 342 0.006027 OR Quote Error grabbing logs: EOF Edited May 14, 2018 by nuhll Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 (edited) What did you enter in plex? IP IP:PORT of tvhproxy?! i Tried both, if i manually access IP:PORT i get the error above, if i enter it in plex, nothing happens, besides plex tells me that it cant connect.. Do you have plex in br0 mode? Edited May 14, 2018 by nuhll Quote Link to comment
Cessquill Posted May 14, 2018 Share Posted May 14, 2018 1 hour ago, mbc0 said: I am loathed to change my Plex Docker due to the amount of time/work involved in doing that! Doesn't take that long to change a docker provider. If it's pointing at the same appdata folder it normally only takes about 10 minutes (unless I've been lucky in the past). Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 (edited) Okay, it might have something to do with security build into dockers. Im not sure tho. It might be the case that bridged containers cant reach each other. So i put plex, tvheadend and tvhproxy on a br0 adress. Finally no errors in logs, but it still just show up in plex, i click next it shows one transmitter "VOX" and then, it switches back to an old USB device and say it cant search for numbers. BTW after EVERY test it seems you NEED to restart plex docker. Edited May 14, 2018 by nuhll Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 (edited) Okay, if im fast enaught i can select hte proxy, and see all channels, but if i click next im back to that old usb and the proxy is dissapeared... wtf? DO i need to wait until tvheadend is finished with epg grabbing? Edited May 14, 2018 by nuhll Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 2 hours ago, nuhll said: What did you enter in plex? IP IP:PORT of tvhproxy?! i Tried both, if i manually access IP:PORT i get the error above, if i enter it in plex, nothing happens, besides plex tells me that it cant connect.. Do you have plex in br0 mode? IP:Port. Plex, tvhe and tvhProxy all need to be in br0 mode. Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 1 hour ago, nuhll said: Okay, if im fast enaught i can select hte proxy, and see all channels, but if i click next im back to that old usb and the proxy is dissapeared... wtf? DO i need to wait until tvheadend is finished with epg grabbing? In setup it may tell you the proxy is not found, but it's still there and works. Mine shows: but it is working. EPG comes from Plex not tvhe. Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 I found a working proxy, without any problems so far: just search in apps in dockers for plexheadend 1 Quote Link to comment
Rick Gillyon Posted May 14, 2018 Share Posted May 14, 2018 You need to enable Dockerhub searching in CA Settings: Then when search finds nothing hit the Dockerhub link: 1 Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 Wow! nice little hidden nugget! thank you for that! Quote Link to comment
mbc0 Posted May 14, 2018 Share Posted May 14, 2018 Any idea why I do not get the option to enter TVH details? I am on advance view Quote Link to comment
NewDisplayName Posted May 14, 2018 Share Posted May 14, 2018 (edited) I must say, it had worked perfectly for 7 channels (and i could watch them), but now, even with new container, i cant again... its crazy it seems plex is just a piece of sh1t. If u add somethin gmanually it says like "oh i already know that device its down" Oo WTF! Does anyone know how to delete old "devices" (ip:ports) from plex? May 14, 2018 18:01:02.240 [0x7fd65ac77700] WARN - HTTP error requesting GET http://192.168.0.10:5004/discover.json (0, No error) (Failed connect to 192.168.0.10:5004; No route to host) May 14, 2018 18:01:02.251 [0x7fd65ac77700] ERROR - DVR:Device: Error refreshing existing device device://tv.plex.grabbers.hdhomerun/12345678, marking as dead. (at this stage i tried to add a 192.168.0.101 as tvh proxy - its so crazy) Edited May 14, 2018 by nuhll Quote Link to comment
NewDisplayName Posted May 15, 2018 Share Posted May 15, 2018 Ive got it working. But i didnt changed anything. First try, new day, working... I dont know. Seems like crap. Quote Link to comment
Rick Gillyon Posted May 15, 2018 Share Posted May 15, 2018 Certainly it has a lot of pauses and spinning circles on live TV, not a great solution. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.