November 11, 20169 yr Author Logs not working for me, not even after a restart of the plugin. unRaid ver. 6.2.2 Plugin ver. 1.0.6 App ver. 2.3.0 on iOS. Sent from my iPhone using Tapatalk You need to update the plugin. Logs are only available from version 1.1.0. That's correct !
November 11, 20169 yr Author Docker log section requests plugin to be installed ... Yes, I think I need to reword the message a bit, because it's valid that any of the logs doesn't exist at all. ... And the VM section only shows the first booted VM, subsequent booting of VMs do not seem to register with the plugin Not sure what you mean by this. Can you please clarify ?
November 11, 20169 yr Docker log section requests plugin to be installed ... Yes, I think I need to reword the message a bit, because it's valid that any of the logs doesn't exist at all. ... And the VM section only shows the first booted VM, subsequent booting of VMs do not seem to register with the plugin Not sure what you mean by this. Can you please clarify ? All dockers have logs currently but the message doesn't show that For the VMs for example it shows my ubuntu VM log which is set to auto start, when I manually start up my win 10 after startup there is no shown log for the win 10 VM
November 12, 20169 yr Author Docker log section requests plugin to be installed ... Yes, I think I need to reword the message a bit, because it's valid that any of the logs doesn't exist at all. ... And the VM section only shows the first booted VM, subsequent booting of VMs do not seem to register with the plugin Not sure what you mean by this. Can you please clarify ? All dockers have logs currently but the message doesn't show that For the VMs for example it shows my ubuntu VM log which is set to auto start, when I manually start up my win 10 after startup there is no shown log for the win 10 VM Oh ok, it's a log issue, I thought you meant something like the vms weren't being shown in the VMs page. Ok ... I'll pm you ... I'm just grabbing the same log files unRAID reports in diagnostics, not sure what could be different.
November 12, 20169 yr Updated the plugin to vs 1.1.1. Seems to be working as expected. I did have to manually start the plugin after installing. The update was installed in the "Stopped" state. Not sure if that is by design.
November 13, 20169 yr Logs not working for me, not even after a restart of the plugin. unRaid ver. 6.2.2 Plugin ver. 1.0.6 App ver. 2.3.0 on iOS. Sent from my iPhone using Tapatalk You need to update the plugin. Logs are only available from version 1.1.0. Thanks. Now i see the logs. Sent from my iPhone using Tapatalk
November 14, 20169 yr Author Updated the plugin to vs 1.1.1. Seems to be working as expected. I did have to manually start the plugin after installing. The update was installed in the "Stopped" state. Not sure if that is by design. Oh, after installing, I've set the state to Stopped. I remember there was some issue with it if I did otherwise. I'll see if I can set it to started now without causing issues.
November 14, 20169 yr Updated the plugin to vs 1.1.1. Seems to be working as expected. I did have to manually start the plugin after installing. The update was installed in the "Stopped" state. Not sure if that is by design. Oh, after installing, I've set the state to Stopped. I remember there was some issue with it if I did otherwise. I'll see if I can set it to started now without causing issues. Figured that was probably deliberate. You might want to mention this in the update announcement if it continues to be necessary. Or maybe I just missed it.
November 15, 20169 yr Author Currently working on System Temperature (got some data to help implement it) and looking at UD. UD is definitely more complicated. If anybody can help with UPS, I'd appreciate it I'm showing the current status of feature request board below (https://feedback.userreport.com/b5864402-1922-4c3e-810c-0e427f4d204a/#ideas/popular) I've added 3 ideas: - List/update dockers and vms - Make banner on details page collapsable - Add ios 3d touch I think I haven't left out others.
November 18, 20169 yr Anyone having trouble with the app just sitting on 'Waiting for the operation to complete' when starting/stopping the array? I've seen this on number of occasions and normally have to force stop the app from management screen. Any ideas?
November 21, 20169 yr Anyone using this app? It hangs each and every time i 'manage' the array. Its just fine for observing whats what but cant seem to interact with the array. Needs force close each time. Sent from my LG-D855 using Tapatalk
November 22, 20169 yr Author Anyone using this app? It hangs each and every time i 'manage' the array. Its just fine for observing whats what but cant seem to interact with the array. Needs force close each time. Sent from my LG-D855 using Tapatalk Hi skylark, yes I've seen that too in the last version ... it stops the array (for example) but then it sits on the "waiting ..." screen. Just bear with me, I've been under the weather for the past few days, but I'm taking a look at the code.
December 5, 20169 yr First off, thank you for the app! Just bought from Appstore. It appears Docker/VM are relatively newer adds to the app. Not a big fan of the web pop-up when configuring them. A built-in configuration area would be nice. Any plans for adding Plugins and Apps (from the Community Applications plugin)?
December 9, 20169 yr Author First off, thank you for the app! Just bought from Appstore. It appears Docker/VM are relatively newer adds to the app. Not a big fan of the web pop-up when configuring them. A built-in configuration area would be nice. Any plans for adding Plugins and Apps (from the Community Applications plugin)? Hi alroofi, thanks ! As for configuration, best case would be to open a 'webview' inside the app for configuration, but it would be essentially the same as opening a browser, where you have arguably more screen real-estate to move about. I can probably take a look at plugins. Apps (meaning docker/vm list/probably updates) is something in the roadmap.
December 11, 20169 yr I can't get it to work in any way Situation Headless unRAID server (link pointing to localhost is not correct as I always use an remote browser) login mask does not accept any password/user combination that exists on my unRAID system. I would expect root to be functional. Always error code 401 (unauthorized). the iOS app also does discover the server. It also seems that the server's IP address is skipped faster then the other IPs in the segment. it all seems to be related to an rights issue... ControlR Plugin v1.1.1 iOS App v2.3.0 unRAID server v6.2.4 system log state: Dec 11 10:38:57 FatMax php: /usr/local/emhttp/plugins/controlr/scripts/start Dec 11 10:38:57 FatMax sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 any Layer-8/Pebkac (me) issues here?
December 11, 20169 yr Author I can't get it to work in any way ... Hi Trebron74, exactly what isn't working ? From what you mention I believe it's the plugin that doesn't work right ? If that's the case, would you mind posting on the plugin thread (https://lime-technology.com/forum/index.php?topic=53062.0) to troubleshoot over there ? Otherwise, could you expand on what's not working in the iOS app ? ... any Layer-8/Pebkac (me) issues here? Not sure what that is.
December 11, 20169 yr I can't get it to work in any way ... Hi Trebron74, exactly what isn't working ? From what you mention I believe it's the plugin that doesn't work right ? If that's the case, would you mind posting on the plugin thread (https://lime-technology.com/forum/index.php?topic=53062.0) to troubleshoot over there ? Otherwise, could you expand on what's not working in the iOS app ? ... any Layer-8/Pebkac (me) issues here? Not sure what that is. PEBKAC = Problem Exists Between Keyboard And Chair Layer 8 = The individual person Another similar one (no offence Trebon74) is ID-10-T error....
December 11, 20169 yr Author ... PEBKAC = Problem Exists Between Keyboard And Chair Layer 8 = The individual person Another similar one (no offence Trebon74) is ID-10-T error.... I see
December 11, 20169 yr ... any Layer-8/Pebkac (me) issues here? Not sure what that is. PEBKAC = Problem Exists Between Keyboard And Chair Layer 8 = The individual person Another similar one (no offence Trebon74) is ID-10-T error.... Yeah forgot about that one I switched to the right support tread as it seems to be a chained issue and getting the plugin up and running would most likely solve the iOS lookup problem as well. initially thought of iOS App is an alternative interface to the web page running on the unRAID server...
December 19, 20169 yr I can't get it to work in any way Situation Headless unRAID server (link pointing to localhost is not correct as I always use an remote browser) login mask does not accept any password/user combination that exists on my unRAID system. I would expect root to be functional. Always error code 401 (unauthorized). the iOS app also does discover the server. It also seems that the server's IP address is skipped faster then the other IPs in the segment. it all seems to be related to an rights issue... ControlR Plugin v1.1.1 iOS App v2.3.0 unRAID server v6.2.4 system log state: Dec 11 10:38:57 FatMax php: /usr/local/emhttp/plugins/controlr/scripts/start Dec 11 10:38:57 FatMax sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 any Layer-8/Pebkac (me) issues here? I am having this exact same issue. Latest iOS and iPhone 6s. Can you assist? I Spent $8 It just go es back an empty server list when I attempt to add the server manually. When I attempt to add it automatically it "skips" the ip address of my unRaid server? Yes the ControlR plugin is running.
December 19, 20169 yr Do you have an root password set? This is mandatory. Do you mean the standard root account on unRAID? Yes I have that set to a custom password Logs: Dec 20 08:29:47 s-chassis php: /usr/local/emhttp/plugins/controlr/scripts/start Dec 20 08:29:47 s-chassis sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378
December 21, 20169 yr Author I can't get it to work in any way Situation Headless unRAID server (link pointing to localhost is not correct as I always use an remote browser) login mask does not accept any password/user combination that exists on my unRAID system. I would expect root to be functional. Always error code 401 (unauthorized). the iOS app also does discover the server. It also seems that the server's IP address is skipped faster then the other IPs in the segment. it all seems to be related to an rights issue... ControlR Plugin v1.1.1 iOS App v2.3.0 unRAID server v6.2.4 system log state: Dec 11 10:38:57 FatMax php: /usr/local/emhttp/plugins/controlr/scripts/start Dec 11 10:38:57 FatMax sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 any Layer-8/Pebkac (me) issues here? I am having this exact same issue. Latest iOS and iPhone 6s. Can you assist? I Spent $8 It just go es back an empty server list when I attempt to add the server manually. When I attempt to add it automatically it "skips" the ip address of my unRaid server? Yes the ControlR plugin is running. Hi jakeandchase, Can you try increasing the timeouts in the settings ? Also, try setting manual timeout to 0 and add the server manually. What unRAID version are you running ?
December 22, 20169 yr Hi jakeandchase, Can you try increasing the timeouts in the settings ? Also, try setting manual timeout to 0 and add the server manually. What unRAID version are you running ? Upped timeout to 10,000 for auto and manual. Manual just goes back to the empty server screen and auto skips my server's IP as if the timeout setting is 0? I also attempted this with timeout of 0, same result. unRAID 6.2.4
December 22, 20169 yr Author Hi jakeandchase, Can you try increasing the timeouts in the settings ? Also, try setting manual timeout to 0 and add the server manually. What unRAID version are you running ? Upped timeout to 10,000 for auto and manual. Manual just goes back to the empty server screen and auto skips my server's IP as if the timeout setting is 0? I also attempted this with timeout of 0, same result. unRAID 6.2.4 ok, I'll send you a pm to troubleshoot this.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.