JWMutant Posted July 22, 2021 Share Posted July 22, 2021 New iOS version looks great. Any way of being able to set dark mode on the app? Quote Link to comment
wgstarks Posted July 22, 2021 Share Posted July 22, 2021 Discover still doesn’t work for me. It does timeout now though. Quote Link to comment
jbrodriguez Posted July 22, 2021 Author Share Posted July 22, 2021 8 hours ago, Slainor said: Can confirm both issues i had, discovery and the Sleeping button is now working as intended, thank you very much. Awesome, there was a bug with the sleep command, thanks for pointing it out Quote Link to comment
jbrodriguez Posted July 22, 2021 Author Share Posted July 22, 2021 7 hours ago, JWMutant said: Any way of being able to set dark mode on the app? The app theme is determined by the operating system, so it will follow any change you make to the system theme. I will probably look into offering different dark and light themes, so there will be more customization within the app, but there are other things I need to do first. 1 Quote Link to comment
jbrodriguez Posted July 22, 2021 Author Share Posted July 22, 2021 22 minutes ago, wgstarks said: Discover still doesn’t work for me. It does timeout now though. Timeout is good ! We have progress In that case it does look like it's not finding the server, I'll look into adding some progress message during discovery to provide some more context. Quote Link to comment
wgstarks Posted July 22, 2021 Share Posted July 22, 2021 6 minutes ago, jbrodriguez said: Timeout is good ! We have progress In that case it does look like it's not finding the server, I'll look into adding some progress message during discovery to provide some more context. Actually, I may be wrong. I’m connecting to my LAN via OpenVPN and IIRC mDNS isn’t supported so that may be the only reason the server isn’t discovered. I’ll test again this evening when I get home. Quote Link to comment
Slainor Posted July 22, 2021 Share Posted July 22, 2021 It’s me again I’m sorry I only tested what the sleep button said not what it does until I really put my server to sleep unfortunately it’s not putting my server into a sleep mode so I went into the log from the app and saw this hope this helps Quote Link to comment
jbrodriguez Posted July 22, 2021 Author Share Posted July 22, 2021 Yes, thanks the log is helpful (I see it's a capture from the app 😀👍) I'll take a look at it later today Quote Link to comment
jbrodriguez Posted July 23, 2021 Author Share Posted July 23, 2021 RELEASE Version 5.0.4 - 2021-07-23 - Fix sleep operation This should fix the sleep not working issue It should be available for android later today and for ios probably tomorrow. Quote Link to comment
wgstarks Posted July 23, 2021 Share Posted July 23, 2021 On 7/22/2021 at 8:18 AM, jbrodriguez said: Timeout is good ! We have progress In that case it does look like it's not finding the server, I'll look into adding some progress message during discovery to provide some more context. On 7/22/2021 at 8:28 AM, wgstarks said: Actually, I may be wrong. I’m connecting to my LAN via OpenVPN and IIRC mDNS isn’t supported so that may be the only reason the server isn’t discovered. I’ll test again this evening when I get home. Finally remembered to test this while I was actually physically present on my local network (doesn’t happen often 😏). Discovery worked great. Actually discovered more than I expected. Quote Link to comment
jbrodriguez Posted July 23, 2021 Author Share Posted July 23, 2021 On 7/22/2021 at 7:28 AM, wgstarks said: I’m connecting to my LAN via OpenVPN and IIRC mDNS isn’t supported Right, that makes sense Quote Link to comment
jbrodriguez Posted July 23, 2021 Author Share Posted July 23, 2021 8 minutes ago, wgstarks said: Actually discovered more than I expected 😀 the avahi signature of unraid server isn't "customized", it's a generic device_info, and uses XServe as the SMBModel. Not sure if XServe is specific to Unraid though. But yeah, you can expect false positives . Any idea what that GENMON is though ? I'd guess it's an emulator of some kind ? Quote Link to comment
wgstarks Posted July 23, 2021 Share Posted July 23, 2021 27 minutes ago, jbrodriguez said: Any idea what that GENMON is though ? I'd guess it's an emulator of some kind ? It's a raspberry running open source generator monitoring software. https://github.com/jgyates/genmon I knew it had mqtt support but didn't realize that it also used mDNS. Tried to add it to ControlR just to see what showed up but that failed. Expected I guess. Quote Link to comment
jbrodriguez Posted July 23, 2021 Author Share Posted July 23, 2021 3 minutes ago, wgstarks said: Tried to add it to ControlR just to see what showed up but that failed. Expected I guess. Well, that was a good test case Quote Link to comment
Slainor Posted July 24, 2021 Share Posted July 24, 2021 sleep problem guy here again is this now a me problem or still from the new redesigned app? Quote Link to comment
Mjaore Posted July 25, 2021 Share Posted July 25, 2021 17 hours ago, Slainor said: sleep problem guy here again is this now a me problem or still from the new redesigned app? Same problem for me although i changed the permissions of the file to 777 there is still no change. On my Android device it works just fine... Quote Link to comment
jbrodriguez Posted July 25, 2021 Author Share Posted July 25, 2021 Yes, this one is a bit strange, I'll need to dig deeper to figure out what's the issue 2 Quote Link to comment
alex165 Posted July 27, 2021 Share Posted July 27, 2021 Evening all, I am using the new update for iOS. When I went in and connected to my server again and tapped on one of the dockers, it took me to a page that just said coming soon, so I went back and then tapped the little arrow next to the docker and it took me to the same page. Did I miss something or is has this update neutered the functionality of the app? (That sounds bad, no disrespect meant, just how it feels.) thanks in advance Quote Link to comment
wgstarks Posted July 27, 2021 Share Posted July 27, 2021 2 minutes ago, alex165 said: Did I miss something or is has this update neutered the functionality of the app? The previous functionality is still there (start/stop). I think you are selecting the arrow which will be new functionality. Quote Link to comment
jbrodriguez Posted July 27, 2021 Author Share Posted July 27, 2021 1 minute ago, alex165 said: tapped on one of the dockers, it took me to a page that just said coming soon Yes, I still need to add a full docker page, where all the functionality will be available, I'll be working on it now that the core of the app has stabilized. Compared to the previous version of the app, I think the only thing missing in the current version is opening the webui, but you can start/stop dockers. The full docker page will contain features not present in the previous version. Quote Link to comment
alex165 Posted July 27, 2021 Share Posted July 27, 2021 11 minutes ago, jbrodriguez said: Yes, I still need to add a full docker page, where all the functionality will be available, I'll be working on it now that the core of the app has stabilized. Compared to the previous version of the app, I think the only thing missing in the current version is opening the webui, but you can start/stop dockers. The full docker page will contain features not present in the previous version. What do I need to do to access the web GUI of my dockers? Will the VM’s page have new functionality as well? Such as a direct VNC connection to VM’s that have VNC selected? Quote Link to comment
jbrodriguez Posted July 27, 2021 Author Share Posted July 27, 2021 3 minutes ago, alex165 said: What do I need to do to access the web GUI of my dockers? That's not currently available, although I can add the option in a patch release soon. 4 minutes ago, alex165 said: Will the VM’s page have new functionality as well? Yes 4 minutes ago, alex165 said: Such as a direct VNC connection to VM’s that have VNC selected? Not sure what will be included, that's mainly the reason I haven't implement that screen yet . But if it's feasible, I might add it. Quote Link to comment
alex165 Posted July 27, 2021 Share Posted July 27, 2021 10 minutes ago, jbrodriguez said: That's not currently available, although I can add the option in a patch release soon. Yes Not sure what will be included, that's mainly the reason I haven't implement that screen yet . But if it's feasible, I might add it. Cool, can’t wait for the new functionality. I do wonder what you were thinking with releasing this new version that cannot do anything other than start or stop dockers and the array, while you work on the new version? Not hating I promise, I know it may sound that way, just trying to understand this decision. I am a software dev by trade, so it makes no sense to me. Quote Link to comment
Fireball3 Posted July 27, 2021 Share Posted July 27, 2021 (edited) 6 hours ago, alex165 said: ... just trying to understand this decision. I am a software dev by trade, so it makes no sense to me. This should answer your question: https://forums.unraid.net/topic/47914-controlr-androidios-app-for-unraid/?do=findComment&comment=1014190 Edited July 27, 2021 by Fireball3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.