Leifgg Posted September 24, 2016 Share Posted September 24, 2016 Having a similar problem. Can’t find Dockers and VM on my Xperia Z4 tablet. However, it works on my Xperia Z1 tablet and on my OnePlus2 phone. Edit: clear cache and reinstall solved this Quote Link to comment
Kewjoe Posted September 24, 2016 Share Posted September 24, 2016 I just cleared data on both of my devices and reconfigured the app and dockers now work fine. Sent from my ONEPLUS A3000 using Tapatalk Quote Link to comment
Helmonder Posted September 25, 2016 Share Posted September 25, 2016 Nice! Really good looking app. For some reason however it refuses to add my main unraid server. My backup server is on the same network and gets found easily. I also cannot add the main server manually.. Verzonden vanaf mijn iPhone met Tapatalk Quote Link to comment
perhansen Posted September 26, 2016 Share Posted September 26, 2016 Working great on iPhone 6 and iOS 10. Server manually added. Can control both VMs and dockers. Sent from my iPhone using Tapatalk Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Latest android version version allows automatic & manual scans but does not find my server. May I request one of those "peek" gizmos on the password field to verify I am adding it correctly? Anyway I am able to move around in the app now but it doesn't find my 6.2 server. couple bugs. Changes to timeout settings do not stick. I changed manual to 500. move back to scan screen, went right back into settings and it was back at 10000. I also found that the timeout settings are being ignored anyway. Even set to 10000 for manual, it never times out. I have to kill the app to try again. Hi interwebtech, what strikes me as odd is that the settings do not stick. That's a very simple operation, shouldn't be an issue. In any case, can you try setting manual timeout to 0, then add the server manually ? I had a very busy weekend (couldn't touch ControlR) and I'm getting up to speed with some test data I got these past few days. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Play store says this: Sorry! This content is not available in your country yet. We're working to bring the content you love to more countries as quickly as possible. Please check back again soon. I'm in the US. Anyone else getting this or is it just me? Hi bobbyintb ? Did it show up ? Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 The iOS app seems to be working great after update. Used auto discovery. No problems so far. Thanks for the confirmation wgstarks ! Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Updated iOS app, but both manual and automatic get stuck when it gets to the correct IP address Ashe, I'll send you a pm. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 I just cleared data on both of my devices and reconfigured the app and dockers now work fine. Sent from my ONEPLUS A3000 using Tapatalk Hi Kewjoe, that's very good to know ! Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Having a similar problem. Can’t find Dockers and VM on my Xperia Z4 tablet. However, it works on my Xperia Z1 tablet and on my OnePlus2 phone. Edit: clear cache and reinstall solved this Thanks for the notice Leifgg ! Quote Link to comment
Helmonder Posted September 26, 2016 Share Posted September 26, 2016 jbrodriguez, I still cannot add my main unraid server... Not automatic and not manual... What should I do ? Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 for some reason i cant open my server on app any more. it is added and reports disk info etc. but when i press on server nothing happens. i have this issue with my xperia z2 phone and xperia z3 tablet. Any ideas? gridrunner, I had a similar report and got some test data, eventually I'll send you a pm, to ask you the same. I'll post back my findings soon. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Working great on iPhone 6 and iOS 10. Server manually added. Can control both VMs and dockers. Sent from my iPhone using Tapatalk Thanks perhansen ! Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 jbrodriguez, I still cannot add my main unraid server... Not automatic and not manual... What should I do ? Helmonder, try one thing .. set manual timeout to 0, then add it manually. If that doesn't work, I'll pm to go a bit deeper into the issue. Quote Link to comment
interwebtech Posted September 26, 2016 Share Posted September 26, 2016 Latest android version version allows automatic & manual scans but does not find my server. May I request one of those "peek" gizmos on the password field to verify I am adding it correctly? Anyway I am able to move around in the app now but it doesn't find my 6.2 server. couple bugs. Changes to timeout settings do not stick. I changed manual to 500. move back to scan screen, went right back into settings and it was back at 10000. I also found that the timeout settings are being ignored anyway. Even set to 10000 for manual, it never times out. I have to kill the app to try again. Hi interwebtech, what strikes me as odd is that the settings do not stick. That's a very simple operation, shouldn't be an issue. In any case, can you try setting manual timeout to 0, then add the server manually ? I had a very busy weekend (couldn't touch ControlR) and I'm getting up to speed with some test data I got these past few days. Timeout setting does not save. Is there supposed to be a "save" button? I don't see one so I assume going back to previous is supposed to save any changes made? I tried manual add (again) and doesn't find it. This time it just goes direct to "no server available" screen with no scan run that I can see. I killed an app I suspect is messing with my VPN. Now automatic scan stops on correct IP .8 but is just spinning. Never completes. Oddly enough it defaults to IP ending in .22 when doing a manual scan. My server is on .8. Just thought it odd it defaults to that number. Quote Link to comment
saarg Posted September 26, 2016 Share Posted September 26, 2016 Latest android version version allows automatic & manual scans but does not find my server. May I request one of those "peek" gizmos on the password field to verify I am adding it correctly? Anyway I am able to move around in the app now but it doesn't find my 6.2 server. couple bugs. Changes to timeout settings do not stick. I changed manual to 500. move back to scan screen, went right back into settings and it was back at 10000. I also found that the timeout settings are being ignored anyway. Even set to 10000 for manual, it never times out. I have to kill the app to try again. Hi interwebtech, what strikes me as odd is that the settings do not stick. That's a very simple operation, shouldn't be an issue. In any case, can you try setting manual timeout to 0, then add the server manually ? I had a very busy weekend (couldn't touch ControlR) and I'm getting up to speed with some test data I got these past few days. Timeout setting does not save. Is there supposed to be a "save" button? I don't see one so I assume going back to previous is supposed to save any changes made? I tried manual add (again) and doesn't find it. This time it just goes direct to "no server available" screen with no scan run that I can see. I killed an app I suspect is messing with my VPN. Now automatic scan stops on correct IP .8 but is just spinning. Never completes. Oddly enough it defaults to IP ending in .22 when doing a manual scan. My server is on .8. Just thought it odd it defaults to that number. I can confirm I have the same behavior that settings doesn't get saved. No matter if I hit enter or go to another field, it will not save. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Latest android version version allows automatic & manual scans but does not find my server. May I request one of those "peek" gizmos on the password field to verify I am adding it correctly? Anyway I am able to move around in the app now but it doesn't find my 6.2 server. couple bugs. Changes to timeout settings do not stick. I changed manual to 500. move back to scan screen, went right back into settings and it was back at 10000. I also found that the timeout settings are being ignored anyway. Even set to 10000 for manual, it never times out. I have to kill the app to try again. Hi interwebtech, what strikes me as odd is that the settings do not stick. That's a very simple operation, shouldn't be an issue. In any case, can you try setting manual timeout to 0, then add the server manually ? I had a very busy weekend (couldn't touch ControlR) and I'm getting up to speed with some test data I got these past few days. Timeout setting does not save. Is there supposed to be a "save" button? I don't see one so I assume going back to previous is supposed to save any changes made? I tried manual add (again) and doesn't find it. This time it just goes direct to "no server available" screen with no scan run that I can see. I killed an app I suspect is messing with my VPN. Now automatic scan stops on correct IP .8 but is just spinning. Never completes. Oddly enough it defaults to IP ending in .22 when doing a manual scan. My server is on .8. Just thought it odd it defaults to that number. No, there's no save button. It should save them as soon as you change any settings. It defaults to the device's address, not the server's I'll pm you to get a bit more data to debug. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 ... I can confirm I have the same behavior that settings doesn't get saved. No matter if I hit enter or go to another field, it will not save. Ouch ! I didn't make that many core changes since the last version, and settings was definitely not one of them Thanks for the reports, I'm running some tests. Quote Link to comment
dmacias Posted September 26, 2016 Share Posted September 26, 2016 I get the same results. Like the info in the forms is not getting transferred to the underlying code. Can't change settings. Edit: although it does show the ip when trying to connect manually. Quote Link to comment
Helmonder Posted September 26, 2016 Share Posted September 26, 2016 jbrodriguez, I still cannot add my main unraid server... Not automatic and not manual... What should I do ? Helmonder, try one thing .. set manual timeout to 0, then add it manually. If that doesn't work, I'll pm to go a bit deeper into the issue. Thanks for your response ! I just tried this and the behaviour is the same, the wheel keeps on running and nothing happens.. Been looking at it for a minute now.. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 Well, I did misname two variables so the timeout settings weren't being saved Stop array confirmation had an issue as well, which is fixed now. I changed the server press behaviour on Android, I think it should solve that issue. I'll look into the issue of adding servers now. Quote Link to comment
jbrodriguez Posted September 26, 2016 Author Share Posted September 26, 2016 ... Thanks for your response ! I just tried this and the behaviour is the same, the wheel keeps on running and nothing happens.. Been looking at it for a minute now.. Right, due to the settings bug, it wasn't actually changing the timeout. Quote Link to comment
Helmonder Posted September 26, 2016 Share Posted September 26, 2016 ok, so wait for a new version ? Will take apple some time I guess ? Quote Link to comment
itimpi Posted September 27, 2016 Share Posted September 27, 2016 I am having no joy getting my unRAID server when running Controlr on my iPad Mini running iOS 10. I am running the current 6.2 stable unRAID release - should Controlr work with that? Quote Link to comment
jbrodriguez Posted September 27, 2016 Author Share Posted September 27, 2016 ok, so wait for a new version ? Will take apple some time I guess ? Yes, I'm changing a bit how to connect to a server, I should have that ready by tomorrow the latest. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.