jbrodriguez Posted July 21, 2017 Author Share Posted July 21, 2017 33 minutes ago, kingpin said: i have the port set to the same number on both the app on the settings for the plugin Ok, use port 80 in the app. It should work (unless you've set a custom emhttp port in the /boot/config/go file). The app uses the same port as the unRAID webGUI's, it doesn't use the plugin's port defined in the plugin's settings. Quote Link to comment
kingpin Posted July 22, 2017 Share Posted July 22, 2017 thank you. that fixed it for me. great app by the way. Quote Link to comment
jbrodriguez Posted August 1, 2017 Author Share Posted August 1, 2017 On 7/22/2017 at 7:47 AM, kingpin said: great app by the way Thanks ! I've found the issue with the app not using the full screen on iPads. The fix will be included in the next release. Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 v2.10.0 is now available on Play Store and App Store ! - Server indicators are presented via a scrolling marquee !!! (If the content exceeds the width of the screen, otherwise it will be static) - Board & cpu temperature, system load and fan rpms indicators are available. (Dynamix System Plugin required for version prior to 6.4.x) - Temperature unit is obtained from unRAID settings. (ControlR plugin v2.2.0+ must be installed for this to work) - Timeouts are now applied when pinging the server. Settings are reset to 1000ms (1s) for both automatic and manual timeouts. Adjust accordingly as needed. Additional changes: - Fix display on iPads - Fix UI issues on Android (excessive space, wrong circular progress) - Use native Switch component (Ops tab) - Fix issue with Back hardware button (Android) This is a very important release, because showing server indicators had me blocked for a long time. Now that I was finally able to get it working, new features should come in faster. The next release will most likely refactor the data (servers) storage structure, which will probably require an app reinstall, but I'll try to convert data to new structure first. 1 Quote Link to comment
Ashe Posted August 9, 2017 Share Posted August 9, 2017 All working and looks great, only comment is about how the CPU load is shown, is that correct? Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 6 minutes ago, Ashe said: All working and looks great, only comment is about how the CPU load is shown, is that correct? That looks awful !!!! My 6.4-rc6 server has an i3-4130T (dual-core), while your AMD A8-7600 is a quad-core. But the cpu load data comes up completely different. Let me pm you to ask you for that cpu load data. Quote Link to comment
wgstarks Posted August 9, 2017 Share Posted August 9, 2017 (edited) Looks like mine is only showing one core even though it's a quad core CPU. Edited August 9, 2017 by wgstarks Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 Ok, I found the issue. It's actually a minor bug, it can be fixed via an OTA release. The app 'should' be showing only the average cpu load, not each of the cores. Eventually, I could make it show all the cores, if requested. Quote Link to comment
Ashe Posted August 9, 2017 Share Posted August 9, 2017 I've just noticed on both iOS and android that sometimes it shows the board temp and then it disappears EDIT: it does come back on its own so maybe just communication with the sensor to the app Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 2 minutes ago, Ashe said: I've just noticed on both iOS and android that sometimes it shows the board temp and then it disappears Thanks for the report, I'll look into it. Quote Link to comment
peter_sm Posted August 9, 2017 Share Posted August 9, 2017 My cpu's looks like this ?. Only text... Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 2 minutes ago, peter_sm said: My cpu's looks like this ?. Only text... That E5-2670 has like virtual cores ?? I guess it's showing data until cpu16 ? I haven't tested rc7a, but it looks like the cpu load format changed. I'll check some more. Quote Link to comment
jbrodriguez Posted August 9, 2017 Author Share Posted August 9, 2017 (edited) v2.10.1 is available as an over-the-air release ! - Fix issue with cpu load display This should correctly display the avg cpu load of the server I'm still looking into the indicator appearing/disappearing. Edited August 9, 2017 by jbrodriguez Quote Link to comment
Ashe Posted August 10, 2017 Share Posted August 10, 2017 Yes that's fixed it for me to a single load, thanks Quote Link to comment
mata7 Posted August 11, 2017 Share Posted August 11, 2017 jbrodriguez thank you for add the ipad full screen mode, i just purchase the app because of this, thank you Quote Link to comment
jbrodriguez Posted August 12, 2017 Author Share Posted August 12, 2017 On 8/11/2017 at 1:27 AM, mata7 said: jbrodriguez thank you for add the ipad full screen mode, i just purchase the app because of this, thank you You're welcome ! Quote Link to comment
jbrodriguez Posted August 12, 2017 Author Share Posted August 12, 2017 v2.10.2 is available as an over-the-air release ! - Fix crash with power on command Quote Link to comment
Kryspy Posted August 27, 2017 Share Posted August 27, 2017 Purchased. Looks great. Quote Link to comment
jbrodriguez Posted August 28, 2017 Author Share Posted August 28, 2017 Thanks a lot for the comment ! Quote Link to comment
jbrodriguez Posted August 31, 2017 Author Share Posted August 31, 2017 Thank you ! Quote Link to comment
MowMdown Posted August 31, 2017 Share Posted August 31, 2017 Question, How hard would it be to include a button on the docker tab to show the individual docker logs within the app? (I would think you could just have it run the browser api (or however apple does in -app browsers) and display the http://tower/$DOCKER/log with a close button) <--- Instead of leaving the app? I like to monitor some active logs as the dockers are running and this would be a neat feature. Quote Link to comment
wgstarks Posted September 1, 2017 Share Posted September 1, 2017 Not sure if this has been reported or not. I just noticed it. Quote Link to comment
H2O_King89 Posted September 4, 2017 Share Posted September 4, 2017 any way for this to work with the new rc8 https? Quote Link to comment
jbrodriguez Posted September 4, 2017 Author Share Posted September 4, 2017 On 9/1/2017 at 7:34 AM, wgstarks said: Not sure if this has been reported or not. I just noticed it. Did you happen to rotate the device while in the screen ? If you rotate the device before entering the detail page, is it still duplicated ? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.