June 11, 201610 yr I did a hardware upgrade. Went too x9dr3-f mother board with dual e5-2670 CPUs with 64gb of ecc memory. After the upgrade unraid never booted again.. It sits on unpacking Iniframfs... minutes on end. After it does unpack it gives a list of hardware errors then reboots and the cycle starts over. Any help would be nice
June 11, 201610 yr Community Expert Did you change the flash drive in any way? Have you done a memtest? Can you post a screenshot. May have to be a photo, please try to get a good one.
June 11, 201610 yr Community Expert Pull the Flash Drive and do a chkdsk on it in a Windows computer. Try a USB2 port if you are trying to boot from a USB3 port.
June 11, 201610 yr Author Did you change the flash drive in any way? Have you done a memtest? Can you post a screenshot. May have to be a photo, please try to get a good one. I pull the flash drive and plugged it back in the new motherboard that's all. I haven't done a memtest yet it's on list! This is also the screenshot I have and been able to get so far. https://imgur.com/a/Rl2ue
June 11, 201610 yr Author Pull the Flash Drive and do a chkdsk on it in a Windows computer. Try a USB2 port if you are trying to boot from a USB3 port. I tried the port switching it didn't change anything But I will a chkdsk and get back with you
June 11, 201610 yr Community Expert Did you change the flash drive in any way? Have you done a memtest? Can you post a screenshot. May have to be a photo, please try to get a good one. I pull the flash drive and plugged it back in the new motherboard that's all. I haven't done a memtest yet it's on list! This is also the screenshot I have and been able to get so far. https://imgur.com/a/Rl2ue Looked at the monitor picture. While I am no expert, I would copy over the bzroot and bzimage files from the downloaded zip file onto the Flash Drive. (It only takes a few minutes to try...)
June 11, 201610 yr Author Did you change the flash drive in any way? Have you done a memtest? Can you post a screenshot. May have to be a photo, please try to get a good one. I pull the flash drive and plugged it back in the new motherboard that's all. I haven't done a memtest yet it's on list! This is also the screenshot I have and been able to get so far. https://imgur.com/a/Rl2ue Looked at the monitor picture. While I am no expert, I would copy over the bzroot and bzimage files from the downloaded zip file onto the Flash Drive. (It only takes a few minutes to try...) As its scrolling it does say a lot of hardware errors but it scrolling so fast I can get any pictures Should backup the flash drive and do a fresh install?
June 11, 201610 yr Community Expert Or load another flash drive with the same version of unRAID and see if that one boots. (It safe to do that.) If that fails to boot, you need to move memtst to the top of the list!
June 11, 201610 yr Author Or load another flash drive with the same version of unRAID and see if that one boots. (It safe to do that.) If that fails to boot, you need to move memtst to the top of the list! Okay I put the flash drive back In the old system boot fine no problems. Right now I'm running a memtest86 so let's see what it tells me after it finished
June 12, 201610 yr Author Or load another flash drive with the same version of unRAID and see if that one boots. (It safe to do that.) If that fails to boot, you need to move memtst to the top of the list! Okay after a long night of test.. The verdict is one bad memory stick and my flash drive is corrupt along with the bad stick So hopefully after today and a new USB I should be running! Thanks for the help!! I'll fill you in if it up and working or if I'm back to square one(let's hope For the best)!!!
Archived
This topic is now archived and is closed to further replies.