June 16, 201610 yr Anyone know why all of a sudden, all my shares would disappear? Same view from windows, http://my.jetscreenshot.com/12412/20160616-zo39-141kb.jpg[/img] Yet, telnet into the server, all the shares are in the user0 directory?!? Is there a way to recover? What could cause this? And what's with the Input/output error?!?
June 16, 201610 yr Anyone know why all of a sudden, all my shares would disappear? Same view from windows, http://my.jetscreenshot.com/12412/20160616-zo39-141kb.jpg[/img] Yet, telnet into the server, all the shares are in the user0 directory?!? Is there a way to recover? What could cause this? And what's with the Input/output error?!? Cache drive dropping offline... Diagnostics will prove it.
June 16, 201610 yr Author Rebooted and the shares are back, but many say they are unprotected? http://my.jetscreenshot.com/12412/20160616-x2ma-141kb.jpg[/img] What diagnostics should I run? Looking at the Dashboard, I've got a yellow triangle. Looking at the SMART data, I see a 187 Reported Uncorrect at 3, which it has been since it was installed. Download of SMART from GUI... smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: OCZ-AGILITY2 Serial Number: OCZ-4EJX1NIBQ895A8K3 LU WWN Device Id: 5 e83a97 fdd3a8322 Firmware Version: 1.33 User Capacity: 240,057,409,536 bytes [240 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jun 15 23:31:43 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 104 099 050 Pre-fail Always - 0/7837308 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 14256h+53m+41.300s 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 259 171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 85 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2 181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 097 097 000 Old_age Always - 3 194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30) 195 ECC_Uncorr_Error_Count 0x001c 104 099 000 Old_age Offline - 0/7837308 196 Reallocated_Event_Count 0x0033 100 100 000 Pre-fail Always - 0 231 SSD_Life_Left 0x0013 097 097 010 Pre-fail Always - 0 233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 88960 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 27584 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 27584 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 30400 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
June 16, 201610 yr Rebooted and the shares are back, but many say they are unprotected? http://my.jetscreenshot.com/12412/20160616-x2ma-141kb.jpg[/img] What diagnostics should I run? Its says some or all files are unprotected. IE: Some files exist on the cache drive waiting to be moved by mover to the array. Completely normal and expected Tools - Diagnostics. But, since you've restarted, the odds of anything being particularly useful in there are small (except for maybe the SMART report from the cache drive)
June 16, 201610 yr Author Rats! So I'll let the system quiesce and move its files, then see if it happens again. If it does, then its Tools>Diagnostics... Thanks!
Archived
This topic is now archived and is closed to further replies.