After manys, 1st disk error


Recommended Posts

It looks like my parity disk is having issues. This thing has been running unattended so long, I think I've just about forgotten what little I knew!

 

Anyway, would like some advice before doing anything. Unraid 5.0, syslog and smart report attached.

 

Thanks!

 

Well it says the files are greater than 192KB and won't take them. Not sure how as the file sizes are 66KB, 32KB and 5KB. Anyway, try here:

https://1drv.ms/f/s!AgqKPKE94KRrhb0rOM51uX98VY4Xgg

 

 

Link to comment

Personally though, I would replace any drive with pending / reallocated sector asap.

If pending goes to zero and the reallocated count is small and not increasing then its probably OK just to keep an eye on it. Reallocating is a normal function for drives.
Link to comment

That took a while, but it's finished rebuilding and checking parity with 0 errors. Here is smart report now:

 

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   177   169   021    Pre-fail  Always       -       8141
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6608
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   070   070   000    Old_age   Always       -       22161
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       13
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       11
193 Load_Cycle_Count        0x0032   179   179   000    Old_age   Always       -       64660
194 Temperature_Celsius     0x0022   126   119   000    Old_age   Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       3
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

 

Pending is now 3 instead of 5 and reallocated is still 0. Does that mean if it tries to read from one of those 3 sectors it will fail again? Why wouldn't it reallocate them? I checked and it's under warranty until October. Is this sufficient issue to return? If not, what do I need to watch for?

 

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.