January 3, 201016 yr Hi all, I have made a server for a friend after he was impressed with mine. It is based on a Gigabyte 945 pl s3. I loaded it with some files, and took it to his place. It ran slowly, only managing about 3.5 Megabytes per second. I seem to remember (although not sure) that when I put it together it was 12Mb/s. My server runs fine at about 12Mb per sec on my 10/100 network, and upto 60Mb/s on my Gigabit net work. Are there any obvious things I can do (perhaps in the Bios) to speed his server up. I have updated to Unraid 4.5 with no benefit. Is it possible to put a new NIC ( I have a few old 10/100 cards) in or does Unraid need integrated NIC? I am confused! Thanks
January 3, 201016 yr Author I have now tried this on the Gigabit router, and I`m getting 58Mb/s , so there don`t seem to be any faults as such, but it looks like in built NIC wont play nice with 10/100 networks ( have tried 3- Safecom / Netgear and Thompson). Will probably force this down to 10/100 with an old add on NIC. Still confused!
January 4, 201016 yr Check cables etc... you should be getting about 12mb/s on a 100Mbit network.... If you already tried different cables and NIC's one might suggest the problem lies with his switch or PC.
Archived
This topic is now archived and is closed to further replies.