July 5, 201610 yr Having just had one of these delivered thinking it would work I would like to request this as well Edit: For additional information this is how the 7805H shows in system devices 06:00.0 Serial Attached SCSI controller [0107]: Adaptec PMC-Sierra PM8018 SAS HBA [series 7H] [9005:8088] (rev 06) It seems to pick up the correct name/information but just won't show the drives in the array selector - i did not try checking system devices with a drive connected to see if they were detected in there at all I have also attached my system diagnostic in case it holds extra information that may help archangel-diagnostics-20160705-1323.zip
July 6, 201610 yr Yep! Do you have one of these cards already ezhik? I'm not sure if this one will work but i plan to try it later: https://lime-technology.com/forum/index.php?topic=40684.0 Its for an adaptec raid card but something similar may need to be done maybe - I'm going to try this later after backing up my server drives as i don't have any spares to plug in and try Jamie Edit: As its my week off work i took apart my array, and tried booting unraid with different settings on the controller and tries running lsblk and a few others and the drives do not appear as a device at all - in fact where some people see the controller as a block level device i see nothing This disproves a controller setting and only leaves drivers - i think - i've seen rather a few posts about people wanting adaptec drives but the majority of them are never replied to at all
July 8, 20169 yr As an update to this after talking to LT the drivers for these cards should be implemented in the rc1 for 6.2, i have been told it is imminent so i will post back once i have been able to test this Jamie Edit: Support is now in for the 7805H in 6.2.0 rc1
July 9, 20169 yr Are you getting any issues reported in your system log? I get multiple per second with my 7805H Jamie
July 9, 20169 yr Author Are you getting any issues reported in your system log? I get multiple per second with my 7805H Jamie Nope... What type of events are you getting? root@tmp-unraid:~# egrep -i 'fail|error' /var/log/syslog Jul 9 18:01:29 tmp-unraid kernel: ACPI: \: failed to evaluate _DSM (0x1001) root@tmp-unraid:~#
July 9, 20169 yr Are you getting any issues reported in your system log? I get multiple per second with my 7805H Jamie Nope... What type of events are you getting? root@tmp-unraid:~# egrep -i 'fail|error' /var/log/syslog Jul 9 18:01:29 tmp-unraid kernel: ACPI: \: failed to evaluate _DSM (0x1001) root@tmp-unraid:~# Around 1 of these everything few seconds Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: AER: Multiple Corrected error received: id=0010 Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0010(Receiver ID) Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: device [8086:2f04] error status/mask=00000040/00002000 Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: [ 6] Bad TLP Last time i saw this was when i had an nvidia driver issue on a vm but the only thing to change before these started was the unraid update and this driver being added These are from the main unraid system log Jamie
July 9, 20169 yr Author Are you getting any issues reported in your system log? I get multiple per second with my 7805H Jamie Nope... What type of events are you getting? root@tmp-unraid:~# egrep -i 'fail|error' /var/log/syslog Jul 9 18:01:29 tmp-unraid kernel: ACPI: \: failed to evaluate _DSM (0x1001) root@tmp-unraid:~# Around 1 of these everything few seconds Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: AER: Multiple Corrected error received: id=0010 Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0010(Receiver ID) Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: device [8086:2f04] error status/mask=00000040/00002000 Jul 9 23:46:23 Archangel kernel: pcieport 0000:00:02.0: [ 6] Bad TLP Last time i saw this was when i had an nvidia driver issue on a vm but the only thing to change before these started was the unraid update and this driver being added These are from the main unraid system log Jamie That's odd, yeah I am not seeing any of these. Sorry champ. My 6805H is solid. you might want to do 'lspci' and find out what device it is exactly. root@tmp-unraid:~# lspci |grep -i 'pmc' 01:00.0 Serial Attached SCSI controller: PMC-Sierra Inc. Device 8001 (rev 05) root@tmp-unraid:~#
July 9, 20169 yr The device is one of my on board plx chips as my board has 7 16x slots so there isn't a way to chase it down to a specific device which is annoying At least I know it's not a full issue on the driver, May just be with my newer card, it's not causing any issues other than filling my log files so not major Jamie
Archived
This topic is now archived and is closed to further replies.