July 13, 20169 yr So I'm currently trying to create a VM that will be my Domain Controller (VLANs, DHCP, DNS, OpenLDAP, PXE, Auth/Radius) Called Controller0 and I'd like to eventually create a redundant Controller1. My motherboard comes with 4NICs+1IPMI. I'm using 1NIC currently for the server itself and plan to bond 2 for Unraid in the future. The last 2 I'd like to dedicate to Controller0/1 vs having to deal with a bridged connection. Unfortunately I only get the option to select a "Network Bridge". Any help would be greatly appreciated. Model: 8core-Avoton 32GB ECC DDR3 M/B: Supermicro - A1SAi CPU: Intel® Atom™ CPU C2750 @ 2.40GHz HVM: Enabled IOMMU: Disabled Cache: 448 kB, 4096 kB Memory: 32768 MB (max. installable capacity 64 GB) Network: bond0: fault-tolerance (active-backup) eth0: 1000Mb/s - Full Duplex eth1: 1000Mb/s - Full Duplex eth2: 1000Mb/s - Full Duplex eth3: not connected Kernel: Linux 4.1.18-unRAID x86_64
July 13, 20169 yr Since your hardware doesn't support iommu, passing through the 2 ports is out of the question. In 6.2 RC it's easier to configure the network through the gui, but I'm not sure if you can set two bridges. Hopefully someone with more knowledge about this will give you an answer on how to do it or if it's possible on 6.1.9.
July 17, 20169 yr Author So I guess that would work. I could setup a bridge per NIC so BR1 and BR2 to connect the VMs to the NICs. I've never actually done this before so I'll poke around a research a bit. If anyone has the solution on how feel free to post it please.
Archived
This topic is now archived and is closed to further replies.