July 16, 20169 yr Gigabyte MA10-ST0 motherboard main specifications:Intel_Atom_C3000 SoC – Intel Atom C3000 “Denverton” processor with 4 to 16 cores @ 1.8 GHz; QKP2 code; 14nm process System Memory – 4x RDIMM/UDIMM slots for DDR4 @ 2400 MHz Storage – 4x SATA 3.0 breakout ports supporting up to 16 drives (8x shared with PCIe slot); 32GB eMMC flash Video Output – VGA Connectivity – 2x 10GbE SFP+ ports; 2x Gigabit Ethernet RJ45 ports (via Intel I210); 1x extra RJ45 port (for management?) USB – 2x USB 2.0 host ports Expansion – 1x PCIe 3.0 x8 slot Misc – Aspeed AST2400 board management controller Power Supply – ATX connector Dimensions – 170 x 170 mm (Mini-ITX form factor) here more: http://www.cnx-software.com/2016/07/16/intel-atom-c3000-denverton-processor-targets-low-power-servers/
July 17, 20169 yr When you factor the cost of a mother board, processor and Sata cards, this has the potential to be a great alternative for building a home media server!
July 17, 20169 yr Nice! I hope those SATA breakouts aren't Marvell based... Sent from my iPhone using Tapatalk
July 17, 20169 yr I don't see an additional controller, so I'm assuming all the SATAs and 10G is in the SOC?
July 17, 20169 yr Author I don't see an additional controller, so I'm assuming all the SATAs and 10G is in the SOC? Storage – 4x SATA 3.0 breakout ports supporting up to 16 drives (8x shared with PCIe slot); 32GB eMMC flash Shared with PCIE port ... im suppose chip could be from other side of mainboard and i can only suppose that will some LSI anyway 16 HDD sounds great ! PS. im also checked spec. detail. old one Avaton Atom on intel site and they write support 2x SATA 3.0 but for C2750 .....
August 1, 20169 yr Not familiar at all with the Atom Server line. For basic usage (Plex streams and a few Dockers) what type of performance would you expect? Sent from my iPhone using Tapatalk
August 1, 20169 yr Not familiar at all with the Atom Server line. For basic usage (Plex streams and a few Dockers) what type of performance would you expect? Sent from my iPhone using Tapatalk I have an Avoton board in my backup server. On occasion when I have had to use it as a fallback, it streams multiple HD video sources simultaneously via an Emby Docker or over SMB just fine. I also run an OpenVPN-AS docker and a W10 VM (to manage my backups) and the server performs just fine. I don't transcode though, is this something you need to do?
August 1, 20169 yr Occasionally. Just looking at your usage, it's likely a bit underpowered for what I do. Thanks for the details, it gives me an idea of usage and I can see having a backup pretty useful. Sent from my iPhone using Tapatalk
Archived
This topic is now archived and is closed to further replies.