July 23, 20169 yr Community Expert hi all, can't reach my servers but i'm pretty sure its something i did had a shaw router in passthrough mode to a linksys router with address 192.168.2.1. had two unraid servers on same network with ip's 192.168.2.66 and 192.168.2.55 today, the linksys got fried, and i upgraded to a new shaw modem. now i have a shaw model with address 192.168.0.1, but servers still have old addresses above. i cannot reach them! pinging them through windows just results in request timed out. can anyone offer advice?
July 24, 20169 yr Pull the flash drive and within /config/network.cfg change the ip address (assuming you've set a static ip address) Sent from my LG-D852 using Tapatalk
July 24, 20169 yr Author Community Expert thanks, should i set it similar to the router router: 192.168.0.1 server: 192.168.0.77 ?? currently server is set to 192.168.2.77
July 28, 20169 yr Author Community Expert sorry for the delay in responding, this worked well, thanks
Archived
This topic is now archived and is closed to further replies.