August 13, 20169 yr Server: R410 RAID Card: PERC6i Drives: WD Red Pro 3TB Hi all, Unraid isn't recognising any drives whatsoever, the only drives are "unassigned", from reading, unraids kernel does not support this type of raid card and or virtual disks, it wants full access to the disks. Is there a proven method to be able to flash this card with a HBA firmware? I've seen many posts 20+ but can't get a full idea of what needs to be done.
August 13, 20169 yr Bad news for you. See this thread and the verified answer: http://en.community.dell.com/support-forums/servers/f/906/t/19609949
August 13, 20169 yr The Perc 6i is a hardware raid controller and it does not support JBOD, so its not suitable for unRAID.
August 14, 20169 yr Nope, according to this chart, the H700 does not support JBOD. http://www.dell.com/learn/us/en/04/campaigns/dell-raid-controllers
August 14, 20169 yr Yes it can be flash to IT mode. Check out the instructions on the 2nd reply here: http://en.community.dell.com/support-forums/servers/f/906/t/19576911
Archived
This topic is now archived and is closed to further replies.