UnRaid 6.2.0-RC4 (Current):

 

Adaptec aacraid driver is version 1.2.1-50663custom

 

50663:

 

http://storage.microsemi.com/en-us/speed/raid/aac/linux/aacraid-linux-src-1_2_1-50663_tgz.php

 

Driver 50663 is only for the HBA cards according to the link above. 

Compatible Products

PMC Adaptec HBA 1000-8e

PMC Adaptec HBA 1000-8i

PMC Adaptec HBA 1000-8i8e

PMC Adaptec HBA 1000-16e

PMC Adaptec HBA 1000-16i

 

50667:

 

http://storage.microsemi.com/en-us/speed/raid/aac/linux/aacraid-linux-src-1_2_1-50667_tgz.php

 

Driver is for the rest of the cards not the HBA cards:

Compatible Products

Adaptec RAID 7805

Adaptec RAID 7805Q

Adaptec RAID 71605

Adaptec RAID 71605E

Adaptec RAID 71605Q

Adaptec RAID 71685

Adaptec RAID 72405

Adaptec RAID 78165

Adaptec RAID 8405

Adaptec RAID 8805

Adaptec RAID 8885

Adaptec RAID 8885Q

Adaptec RAID 81605Z

Adaptec RAID 81605ZQ

 

I own 2x 71605e cards to run my UnRaid server and they are set to run in HBA mode however they only work when they are alone in the system.  If I put in both cards the second card locks up and will not mount the drives while the first card will mount the drives just fine. 

 

I believe this problem is likely due to the driver issue I have shown above where there is actually 2 different aacraid drivers for Linux based on the cards you use

 

I am wondering if the 50667 driver will work correctly for the HBA cards and I assume it will, however the 50663 driver does not work correctly for the other cards. 

 

Can we please replace the 50663 driver with the 50667 driver?

 

Thanks

 

Will this be able to be put into the Release Candidate. 

 

thanks