ProtoJazz Posted August 23, 2016 Share Posted August 23, 2016 I've got a poweredge t20 running unraid, and I got a 5th drive for it, as well as a startech 2 port Sata card. My issue is though it only seems to read the 4 drives connected to the mobo. However in the bios the drive connected to the Sata card is listed as a boot device (s0) but doesn't seem to be recognized as a drive. Do I just have a defective card? I'd think not since it shows as a boot device. I've seen people add more drives to these, and I think dell even says it can do 6 drives. So what am I missing? Do I need to update the bios or something? Says the last update was 2014 and I just bought it this year. But if so, how do I update it? Quote Link to comment
JorgeB Posted August 23, 2016 Share Posted August 23, 2016 If it uses a Marvell chipset see this thread. Quote Link to comment
ProtoJazz Posted August 23, 2016 Author Share Posted August 23, 2016 So it would seem like I can just disable iommu and it should work? Is that something in unraid, or the bios? Quote Link to comment
JorgeB Posted August 23, 2016 Share Posted August 23, 2016 Look for Virtualization or VT-d in the bios and disable it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.