DZMM Posted August 30, 2018 Share Posted August 30, 2018 9 hours ago, alturismo said: How many tuners are active in TVH ? DVB Inputs, Adapters ... all mapped to DVB-C ? I think you're replying to me. Four tuners all DVB-T on my freeview network. All tuners are working fine and as long as I watch channels on the four muxes they are tuned to I'm fine - it's when I try to get one of the tuners to tune a new muxe, they refuse. All worked fine previously, I just noticed yesterday they weren't switching when I tried some channels we don't watch often. Quote Link to comment
alturismo Posted August 30, 2018 Share Posted August 30, 2018 ok, so when all 4 tuners are running and 1 of them want to switch a channel to a different mux u get the "no free adapter ..:" may try the delay time, its in the tuner setting, up to 2000ms ... Quote Link to comment
DZMM Posted August 30, 2018 Share Posted August 30, 2018 2 hours ago, alturismo said: ok, so when all 4 tuners are running and 1 of them want to switch a channel to a different mux u get the "no free adapter ..:" may try the delay time, its in the tuner setting, up to 2000ms ... I can't find - in TVH or Kodi?? Quote Link to comment
alturismo Posted August 31, 2018 Share Posted August 31, 2018 probably better to check the logs what TVH says first. either in TVH Web GUI, buttom right u can open the log, or in the docker logs from TVH, also webgui and logs. and the delay ... its in the TVH adapters settings, but i cant imagine thats it. Quote Link to comment
DiscoDuck Posted September 3, 2018 Share Posted September 3, 2018 Have anyone managed to setup a reverse proxy with Lets encrypt? If so, would you be able to share how you did it? Quote Link to comment
Johan76 Posted September 9, 2018 Share Posted September 9, 2018 Hi there. Have not found out if this docker is complete with internal epg grabber enabled? Want to add epg data to my iptv channels but cannot find the settings. If this is not enabled how do I do this inside this docker? Quote Link to comment
saarg Posted September 9, 2018 Share Posted September 9, 2018 14 minutes ago, Johan76 said: Hi there. Have not found out if this docker is complete with internal epg grabber enabled? Want to add epg data to my iptv channels but cannot find the settings. If this is not enabled how do I do this inside this docker? It's all there in Configuration --> Channel / EPG. You need to switch on Advanced or Expert User Interface Level in Configuration -->General --> Base to see it. Quote Link to comment
Johan76 Posted September 9, 2018 Share Posted September 9, 2018 5 minutes ago, saarg said: It's all there in Configuration --> Channel / EPG. You need to switch on Advanced or Expert User Interface Level in Configuration -->General --> Base to see it. Yes. But channels doesn't map. I cannot set a specific epg source. If I edit a channel advanced there are no epg sources to choose from in the dropdown list. How am I supposed to fix this. Havn't found any guide that works. Some are referring to installing grabbers from bash but not sure this really is necessary or the problem. Quote Link to comment
saarg Posted September 9, 2018 Share Posted September 9, 2018 10 minutes ago, Johan76 said: Yes. But channels doesn't map. I cannot set a specific epg source. If I edit a channel advanced there are no epg sources to choose from in the dropdown list. How am I supposed to fix this. Havn't found any guide that works. Some are referring to installing grabbers from bash but not sure this really is necessary or the problem. You need to configure the grabber you want to use, then run it, then map epg source to the channel. There is a link in the first post to the readme on github which has information about configuring your grabber. 1 Quote Link to comment
Johan76 Posted September 9, 2018 Share Posted September 9, 2018 48 minutes ago, saarg said: You need to configure the grabber you want to use, then run it, then map epg source to the channel. There is a link in the first post to the readme on github which has information about configuring your grabber. Thanks. Managed to configure it inside docker and I think it went ok. However I cannot enable any grabber. Actually cannot find Configuration --> Channel/EPG --> EPG Grabber Modules at all. Quote Link to comment
saarg Posted September 10, 2018 Share Posted September 10, 2018 18 hours ago, Johan76 said: Thanks. Managed to configure it inside docker and I think it went ok. However I cannot enable any grabber. Actually cannot find Configuration --> Channel/EPG --> EPG Grabber Modules at all. Did you change the User Interface Level as I instructed you in an earlier reply? Quote Link to comment
Johan76 Posted September 10, 2018 Share Posted September 10, 2018 1 hour ago, saarg said: Did you change the User Interface Level as I instructed you in an earlier reply? Dude! I am so stupid. I was reading fast and did not realise it was a "standard" setting for expert. I only changed to expert in the actual channel/epg view which didnt work. Now I see it! Thanks a lot Quote Link to comment
toleeck Posted September 13, 2018 Share Posted September 13, 2018 (edited) I hope I've come to the right forum thread. is it possible in the future update of the docker for TVH to add an EPG for Russian channels? There is an excellent working file. which, when the docker is updated, has to be added to the manual each time (dsm synology 6.2). actually grabber-file I had attached to this message. tv_grab_ru Edited September 13, 2018 by toleeck Quote Link to comment
j0nnymoe Posted September 13, 2018 Share Posted September 13, 2018 1 hour ago, toleeck said: I hope I've come to the right forum thread. is it possible in the future update of the docker for TVH to add an EPG for Russian channels? There is an excellent working file. which, when the docker is updated, has to be added to the manual each time (dsm synology 6.2). actually grabber-file I had attached to this message. tv_grab_ru This support thread is for unraid users only. Please submit this as an issue on our github repo for TVHeadend, Thanks. Quote Link to comment
toleeck Posted September 13, 2018 Share Posted September 13, 2018 48 minutes ago, j0nnymoe said: This support thread is for unraid users only I understood! apologize. Quote Link to comment
memphisto Posted September 15, 2018 Share Posted September 15, 2018 Channels in HEVC not working in latest two updates. How to downgrade to stable version? I im use repository linuxserver/tvheadend:release-4.2 or stable-4.2.1 or stable-4.0.9 but doesn't work. Quote Link to comment
saarg Posted September 15, 2018 Share Posted September 15, 2018 1 minute ago, memphisto said: Channels in HEVC not working in latest two updates. How to downgrade to stable version? I im use repository linuxserver/tvheadend:release-4.2 or stable-4.2.1 or stable-4.0.9 but doesn't work. Not sure I understand you. Which version did you have before the issue started? Quote Link to comment
memphisto Posted September 15, 2018 Share Posted September 15, 2018 (edited) Latest (linuxserver/tvheadend) its bug https://tvheadend.org/issues/5204 Edited September 15, 2018 by memphisto Quote Link to comment
saarg Posted September 15, 2018 Share Posted September 15, 2018 2 minutes ago, memphisto said: Latest (linuxserver/tvheadend) its bug https://tvheadend.org/issues/5204 You probably have to set up tvheadend again from scratch if downgrading as the config might not be compatible. For downgrading, just add the tag you want after the repository. It's in the github Readme. Quote Link to comment
memphisto Posted September 16, 2018 Share Posted September 16, 2018 Thanks, with config from scratch it work. Quote Link to comment
alturismo Posted September 19, 2018 Share Posted September 19, 2018 @saarg small update about hw decoding with coffee lake, seems to work now with latest TVH, i made no changes also working parallel with PLEX using hw decoding, just as note if someone else is interested. as note, i dont even have the /dev/dri in extra parameters anymore ... figured out by accident cause i chosen the wrong profile and i had a pic Quote Link to comment
saarg Posted September 19, 2018 Share Posted September 19, 2018 10 hours ago, alturismo said: @saarg small update about hw decoding with coffee lake, seems to work now with latest TVH, i made no changes also working parallel with PLEX using hw decoding, just as note if someone else is interested. as note, i dont even have the /dev/dri in extra parameters anymore ... figured out by accident cause i chosen the wrong profile and i had a pic If you haven't passed through /dev/dri to the container, it's not using the GPU for transcoding. Have you maybe turned on priviliged mode? Quote Link to comment
alturismo Posted September 20, 2018 Share Posted September 20, 2018 If you haven't passed through /dev/dri to the container, it's not using the GPU for transcoding. Have you maybe turned on priviliged mode? Yes, privileged is onGesendet von meinem SM-G950F mit Tapatalk Quote Link to comment
saarg Posted September 20, 2018 Share Posted September 20, 2018 (edited) 16 minutes ago, alturismo said: Yes, privileged is on Gesendet von meinem SM-G950F mit Tapatalk That means everything in /dev/ is accessible for tvheadend. It's not something we recommend. Edited September 20, 2018 by saarg Quote Link to comment
alturismo Posted September 21, 2018 Share Posted September 21, 2018 makes sence ... nvm, was just a note in case someone else is interested. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.