[Support] Linuxserver.io - TVHeadend


Recommended Posts

1 hour ago, saarg said:

 

It's using the available ffmpeg from alpine Linux, so it's not anything we compile.

Are you using the latest version of the container or the stable one? 

If you are using the latest it might also be a bug in TVheadend, so check their page for open issues. 

Thanks for your help. I'm using the latest version of the container. I tried different containers but they all seem to be affected. Is there any way I could update ffmpeg inside a docker container? Okay, I will try to get help from the tvh forum.

 

Edit: You might be right. There could be a bug. I used the 4.2-release version now and it works without any problem.

Edited by xses
Link to comment
4 hours ago, xses said:

Thanks for your help. I'm using the latest version of the container. I tried different containers but they all seem to be affected. Is there any way I could update ffmpeg inside a docker container? Okay, I will try to get help from the tvh forum.

 

Edit: You might be right. There could be a bug. I used the 4.2-release version now and it works without any problem.

The latest is built from the master branch of tvheadend and it's alot of development going on now. So if you don't have anything you need in that branch, use the stable one. 

Link to comment
On 11/7/2018 at 2:39 PM, saarg said:

 

I'll check the build log if it complains about it and add if necessary. 

 

Any updates to this? Still getting:

docker exec -it -u abc tvheadend /usr/bin/tv_grab_zz_sdjson_sqlite --configure
Can't locate LWP/UserAgent/Determined.pm in @INC (you may need to install the LWP::UserAgent::Determined module) (@INC contains: /usr/local/lib/perl5/site_perl /usr/local/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl) at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927.
BEGIN failed--compilation aborted at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927.

Using the newest update from the weekend (4.2.7-34~g036b9cbab).

Thanks again.

Link to comment
22 hours ago, live4ever said:

 

Any updates to this? Still getting:


docker exec -it -u abc tvheadend /usr/bin/tv_grab_zz_sdjson_sqlite --configure
Can't locate LWP/UserAgent/Determined.pm in @INC (you may need to install the LWP::UserAgent::Determined module) (@INC contains: /usr/local/lib/perl5/site_perl /usr/local/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl) at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927.
BEGIN failed--compilation aborted at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927.

Using the newest update from the weekend (4.2.7-34~g036b9cbab).

Thanks again.

 

Yes it's missing the perl module. I'll add it when I get some time. Not sure when though. 

Link to comment
10 hours ago, alturismo said:

if someone has issues like tvheadend crashing always since latest update, i use the tag 192 and its working.

 

may cause i have schedule direct as epg source ...

 

just in case someone else has the same issue

what do you mean by use tag 192?

 

I ask because my TVH server over the last...idk, 3 days or so, has just been dying. What i mean by that is I start up the server, everything works fine and then at some point it just dies. It might last 2minutes, it might last 30min, but at some point it just becomes completely unresponsive and I have to restart the container.

Link to comment

Hi!

 

in the TVHeadend configuration the storage path setting for timeshift data is coming as empty.

As a result, the timeshift buffer is managed inside the docker container filesystem and this may grow larger than intended.

This may not be what everyone wishes to do.

 

I thus suggest to have either in the standard setting a storage path set for timeshift as: /recordings/timeshift

As a result the timeshift buffer is stored in the path where the DVR recordings go.

 

Alternatively you could introduce a separate path for the timeshift buffer and as well a respective mapping for the container config.

 

Just my 2 cents...

 

Link to comment
  • 3 weeks later...

Hey guys,

 

first of all a happy new year to everyone.

 

I've been using this docker for quite some time now in combination with a Digital Devices Cine S2 V6.5. Unfortunately I only have one tuner available at the location of the server. So watching live TV and recording stuffs is a pain in the ass. So I was thinking of using an aditional IPTV source.

 

I've come across an interesting script in a german kodi forum, that offers the ability to integrate one of the biggest german speaking IPTV providers (Zattoo). Unfortunately the script was written for a Debian/Ubuntu base while this docker is on an Alpine base. Does anyone know if/how this could be adjusted to be used with this docker, as this is running perfectly.

 

The script can be found here: https://github.com/sunsettrack4/zattoo_tvh

 

Thanks in advance for any tips.

 

 

Link to comment
13 minutes ago, Spooky83 said:

Hey guys,

 

first of all a happy new year to everyone.

 

I've been using this docker for quite some time now in combination with a Digital Devices Cine S2 V6.5. Unfortunately I only have one tuner available at the location of the server. So watching live TV and recording stuffs is a pain in the ass. So I was thinking of using an aditional IPTV source.

 

I've come across an interesting script in a german kodi forum, that offers the ability to integrate one of the biggest german speaking IPTV providers (Zattoo). Unfortunately the script was written for a Debian/Ubuntu base while this docker is on an Alpine base. Does anyone know if/how this could be adjusted to be used with this docker, as this is running perfectly.

 

The script can be found here: https://github.com/sunsettrack4/zattoo_tvh

 

Thanks in advance for any tips.

 

 

 

It's written for Linux, so should work in alpine also. But only if the dependencies are available for alpine. 

You need to do some modifications of the tvheadend container for this to work. 

You need to follow the installation guide on the github Readme and install all the needed dependencies. To make it permanent, you have to map a startup script that installs all the necessary dependencies and the script. If you don't, all your changes will be lost when you update the container. 

You probably need to run a script at container start. I just skimmed through the Readme, so don't know fully. 

Link to comment

Yes I know that the dependencies are key here and I have already tried Installing the dependencies via terminal, but from what I remember (that was 2 weeks ago) at least 1 dependency was not available. Wasn't there a Debian based docker for testing? I think I remember there being one...

Haven't really thought about the startup script, so thanks for that tip. I've got to read up on that once I figure out how to get it running.

Gesendet von meinem ONEPLUS A6013 mit Tapatalk

Link to comment


Hello
I have a problem and I'm stuck.
I am using unRAID 6.6.6
I have installed from LinuxServer.io:
unRAID DVB Edition and tvheadend as well as Dynamix S3 Sleep and Dynamix System Buttons.
The computer has a Digital Devices DVB-S 6.5 installed.


When the computer is restarted, everything works fine.
When the computer goes to sleep over the Butto Sleep or with Dynamix S3 Sleep and again
wakes up tvheadend no longer works.
Restart or restart the container unfortunately remains without success.
Even the connected monitor does not turn on !?

The webgui of unRAID can be reached.
I have tried in the S3 Sleep Plugin with modprobe -r ddbridge to unload the drivers and when waking up with the parameters modprobe ddbrige to load again, unfortunately, has also brought no success.
Reset and Reboot do not solve the problem!
Just turning off the computer and turning it on will solve the problem ... until the next sleep.
Does anyone have an idea and can help me please?

Sorry had to ask google for the text :(

 

Log:

Jan 6 22:44:05 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5a9], Status=-5

Jan 6 22:44:06 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:06 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:06 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5aa], Status=-5

Jan 6 22:44:07 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:07 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:07 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5ab], Status=-5

Jan 6 22:44:08 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:08 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:08 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5ac], Status=-5

Jan 6 22:44:09 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:09 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:09 Tower kernel: stv090x_write_regs: Reg=[0xf5a8], Data=[0x00 ...], Count=1, Status=-5

Jan 6 22:44:09 Tower kernel: stv090x_read_per: I/O error

Jan 6 22:44:10 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:10 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:11 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:11 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:11 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf12a], Status=-5

 

Edited by nebosa
Link to comment
4 hours ago, nebosa said:


Hello
I have a problem and I'm stuck.
I am using unRAID 6.6.6
I have installed from LinuxServer.io:
unRAID DVB Edition and tvheadend as well as Dynamix S3 Sleep and Dynamix System Buttons.
The computer has a Digital Devices DVB-S 6.5 installed.


When the computer is restarted, everything works fine.
When the computer goes to sleep over the Butto Sleep or with Dynamix S3 Sleep and again
wakes up tvheadend no longer works.
Restart or restart the container unfortunately remains without success.
Even the connected monitor does not turn on !?

The webgui of unRAID can be reached.
I have tried in the S3 Sleep Plugin with modprobe -r ddbridge to unload the drivers and when waking up with the parameters modprobe ddbrige to load again, unfortunately, has also brought no success.
Reset and Reboot do not solve the problem!
Just turning off the computer and turning it on will solve the problem ... until the next sleep.
Does anyone have an idea and can help me please?

Sorry had to ask google for the text :(

 

Log:

Jan 6 22:44:05 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5a9], Status=-5

Jan 6 22:44:06 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:06 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:06 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5aa], Status=-5

Jan 6 22:44:07 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:07 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:07 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5ab], Status=-5

Jan 6 22:44:08 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:08 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:08 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf5ac], Status=-5

Jan 6 22:44:09 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:09 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:09 Tower kernel: stv090x_write_regs: Reg=[0xf5a8], Data=[0x00 ...], Count=1, Status=-5

Jan 6 22:44:09 Tower kernel: stv090x_read_per: I/O error

Jan 6 22:44:10 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:10 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:11 Tower kernel: ddbridge 0000:01:00.0: I2C timeout, card 0, port 0, link 0

Jan 6 22:44:11 Tower kernel: ddbridge 0000:01:00.0: DDBridge IRS 000000f3

Jan 6 22:44:11 Tower kernel: stv090x_read_reg: Read error, Reg=[0xf12a], Status=-5

 

 

Might be a driver issue. I don't use sleep, so don't have any other suggestions unfortunately.

Link to comment
  • 4 weeks later...

Is there anything I can do about the below errors, or should I be worried about this?

 

I keep getting errors in the log that look like this:

 

2019-01-28 23: 14: 30.802 [ERROR] spawn: Name" Params :: Validate :: NO_VALIDATION "used only once: possible typo at / usr / bin / tv_grab_zz_sdjson line 238.

2019-01-28 23 : 14: 35.009 [ERROR] spawn: Initializing ...

2019-01-28 23: 15: 30.856 [ERROR] spawn: ** POST https://json.schedulesdirect.org/20141201/token ==> -? 200 OK (2s)

2019-01-28 23: 15: 30.925 [ERROR] spawn: ** GET https://json.schedulesdirect.org/20141201/status ==> -? 200 OK

2019-01-28 23:15 : 30.927 [ERROR] spawn: Updating lineups ...

2019-01-28 23: 15: 30.927 [ERROR] spawn: Indexing channels ...

2019-01-28 23: 15: 30.930 [ERROR] spawn: Updating schedules ...

2019-01-28 23: 15: 37.341 [ERROR] spawn: ** POST https://json.schedulesdirect.org/20141201/ schedules / md5 ==> -? \? |? /? -? \? |? /? -? \? |? /? -? \? |? /? -? \? |? /? -? \? |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |? ??? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? -? \? |? /? -? \? |? /? 200 OK (7s)

2019-01-28 23: 15: 39.836 [ERROR] spawn: Invalid schedule for channel 96635

2019-01-28 23: 15: 42.344 [ERROR] spawn: ** POST https://json.schedulesdirect.org/20141201/schedules ==> -? \? |? /? -? \? |? /? ? - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? - ? \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |??? / - \? |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |? ??? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? ? - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? - ? \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |??? / - \? |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |? ??? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? -? \? |? /? 200 OK (3s)

2019-01-28 23: 15: 48.727 [ERROR] spawn: Updating programs ...

2019-01-28 23: 15: 51.207 [ERROR] spawn: ** POST https://json.schedulesdirect.org/20141201/programs ==> -? \? |? /? -? \? |? /? ? - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ | /? - ? \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |???? / - \ |??? / - \? |? /? -? \? |? /? -? \? |? /? -? \? |? /? -? \? |? /? -? \? |? /? -? \? 200 OK (1s)

2019-01-28 23: 15: 52.587 [ERROR] spawn: Removing old cache entries ...

2019-01-28 23:16:04.891 [ERROR] spawn: Writing output ...

 

I am still able to watch TV and get guide data, so Im not really sure what any of this means. What are the errors?

Edited by DazedAndConfused
Link to comment

I can't for the life of me figure out why I'm having such trouble logging into the GUI.

 

I go through the wizard and it asks to create admin credentials and then a user credential.  I do both.  Then at the end of the wizard it says it's going to clear the admin creds and to login witih user.  Okay.  I go to login, 403 Forbidden.  Huh?  I delete everything and start again.  I dont set an admin and I set a username/pass to test/test.  Can't get this wrong, right?  403 Forbidden?  I remember trying this docker out a year ago and facing the same issue now that I think of it.  I saw that someone else posted about it but did not see a resolution.

 

Any idea what's going on?

Link to comment

may start from scratch, delete docker and image, delete the /appdata folder (where your user files are) ...

 

personally i see this behavior too when i try to fast to relogin sometimes ... but closing browser completely and reopen it solves it ...

pretty sure some cookie / cache thingy here but nothing important here.

 

May tried with another browser just to make sure ?

Link to comment
8 hours ago, alturismo said:

may start from scratch, delete docker and image, delete the /appdata folder (where your user files are) ...

 

personally i see this behavior too when i try to fast to relogin sometimes ... but closing browser completely and reopen it solves it ...

pretty sure some cookie / cache thingy here but nothing important here.

 

May tried with another browser just to make sure ?

 

Yeah, I've tried all of the above.  Started from scratch, delete image, appdata folder, etc.  different browsers.  Always an issue for me.  

 

Does it have to do with the startup wizard?  Because at the end it says we'll log you out and remove the admin user and then when you try to login, neither the admin creds, or user creds just created work.

Edited by Living Legend
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.