saarg Posted February 6, 2019 Share Posted February 6, 2019 (edited) 5 hours ago, Living Legend said: Yeah, I've tried all of the above. Started from scratch, delete image, appdata folder, etc. different browsers. Always an issue for me. Does it have to do with the startup wizard? Because at the end it says we'll log you out and remove the admin user and then when you try to login, neither the admin creds, or user creds just created work. I am not able to reproduce this and have never experienced it. I tried both the stable and master branch. It does not remove the admin user you create, but the default password free administrator account that let's you access the webui after the first start. Do you have any adblocker or antivirus running that might interfere? Also might be good to post your docker run command. Also be sure to delete the appdata folder with rm -rf as it doesn't get deleted when removing a container in the webgui. Edited February 6, 2019 by saarg Quote Link to comment
Living Legend Posted February 7, 2019 Share Posted February 7, 2019 17 hours ago, saarg said: I am not able to reproduce this and have never experienced it. I tried both the stable and master branch. It does not remove the admin user you create, but the default password free administrator account that let's you access the webui after the first start. Do you have any adblocker or antivirus running that might interfere? Also might be good to post your docker run command. I'll screenshot the process in a little bit to make sure that I've explained things appropriately. Quote Link to comment
Living Legend Posted February 7, 2019 Share Posted February 7, 2019 This was my process to start from scratch and recreate the issue: 1. Deleted container/image. 2. Deleted appdata tvheadend folder. 3. Downloaded docker 4. Enter docker WebUI 5. Complete wizard 6. 403 Forbidden on admin 7. Open google incognito instance. 8. 403 Forbidden on user Shown below is a quick gif of the install: - Running uBlock Origin on chrome as an adblocker, but have since tried on internet explorer with same error. - Below is the run command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='tvheadend' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'PGID'='100' -e 'PUID'='99' -p '9981:9981/tcp' -p '9982:9982/tcp' -v '/mnt/user/appdata/tvheadend':'/config':'rw' -v '/mnt/user/downloads/tvheadend/':'/recordings':'rw' -v '/mnt/user':'/unraid':'rw' 'linuxserver/tvheadend' b34e7739f62a447c88910ffff6603782cb7854bf06bfaabc7b97f057b6a7f3eb The command finished successfully! Quote Link to comment
j0nnymoe Posted February 7, 2019 Share Posted February 7, 2019 Try not using 0.0.0.0 - Leave that blank or put your actual IP range in 192.168.1.0/24 for example. Quote Link to comment
Living Legend Posted February 7, 2019 Share Posted February 7, 2019 7 hours ago, j0nnymoe said: Try not using 0.0.0.0 - Leave that blank or put your actual IP range in 192.168.1.0/24 for example. I'll give this a shot tonight Quote Link to comment
danofun Posted February 13, 2019 Share Posted February 13, 2019 (edited) On 12/3/2018 at 7:14 AM, live4ever said: Any updates to this? Still getting: docker exec -it -u abc tvheadend /usr/bin/tv_grab_zz_sdjson_sqlite --configure Can't locate LWP/UserAgent/Determined.pm in @INC (you may need to install the LWP::UserAgent::Determined module) (@INC contains: /usr/local/lib/perl5/site_perl /usr/local/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl) at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927. BEGIN failed--compilation aborted at /usr/bin/tv_grab_zz_sdjson_sqlite line 4927. Using the newest update from the weekend (4.2.7-34~g036b9cbab). Thanks again. On 12/4/2018 at 5:20 AM, saarg said: Yes it's missing the perl module. I'll add it when I get some time. Not sure when though. tv_grab_zz_sdjson_sqlite is still failing and can be fixed by including perl-lwp-useragent-determined in the build. I've submitted pull request #117 to solve this issue. Edited February 28, 2019 by danofun Quote Link to comment
allanp81 Posted February 13, 2019 Share Posted February 13, 2019 Anyone else seeing this: I'm on "linuxserver/tvheadend:release-4.2" and the last time the docker updated was last night. Quote Link to comment
s.Oliver Posted February 13, 2019 Share Posted February 13, 2019 57 minutes ago, allanp81 said: Anyone else seeing this: I'm on "linuxserver/tvheadend:release-4.2" and the last time the docker updated was last night. me too. have seen it over the last 2 updates. everything seems to work as usual, but the release number is off. Quote Link to comment
allanp81 Posted February 13, 2019 Share Posted February 13, 2019 6 minutes ago, s.Oliver said: me too. have seen it over the last 2 updates. everything seems to work as usual, but the release number is off. Yes it seems to be working fine but obviously not reporting a version number anymore. Quote Link to comment
saarg Posted February 13, 2019 Share Posted February 13, 2019 5 hours ago, danofun said: tv_grab_zz_sdjson_sqlite is still failing and can be fixed by including perl-lwp-useragent-determined in the build. I've submitted pull request #109 to solve this issue. Sorry, have completely forgotten to add the package. Haven't really had any time for lsio stuff either this year as work and normal life takes priority. Thanks for the pr. Will merge it when I figure out our new build system. Quote Link to comment
saarg Posted February 13, 2019 Share Posted February 13, 2019 3 hours ago, allanp81 said: Yes it seems to be working fine but obviously not reporting a version number anymore. This is due to our new build system. I'll check if we can get it fixed. Quote Link to comment
stormense Posted February 18, 2019 Share Posted February 18, 2019 (edited) I don't now why but after last update it takes about 5-20 minutes to log in and everything is slow. I must have done something wrong. But I fix it, delete and reinstall but takes one day to scan iptv channels again. How do I get EPG to work. Searching in three days now but the info I get is not a step to step. I grab my epg from: epg.SOME-SITE.com/epg/epg.xml.gz. Can't get TVheadend to reed it. Edited February 18, 2019 by stormense Quote Link to comment
s.Oliver Posted February 19, 2019 Share Posted February 19, 2019 The last update fixed the Picons, thx. Quote Link to comment
stormense Posted February 19, 2019 Share Posted February 19, 2019 23 hours ago, stormense said: I don't now why but after last update it takes about 5-20 minutes to log in and everything is slow. I must have done something wrong. But I fix it, delete and reinstall but takes one day to scan iptv channels again. How do I get EPG to work. Searching in three days now but the info I get is not a step to step. I grab my epg from: epg.SOME-SITE.com/epg/epg.xml.gz. Can't get TVheadend to reed it. Hm, some ting is wrong with the latest update. And on my machine. First I lost the connection to TvHeadOn when sanning channels then after some our Unraid crash and must do a cold reboot. Motherboard:Gigabyte B85M-DS3H Processor:Intel® Core™ i5-4690K Memory:16 GB Quote Link to comment
saarg Posted February 19, 2019 Share Posted February 19, 2019 22 minutes ago, stormense said: Hm, some ting is wrong with the latest update. And on my machine. First I lost the connection to TvHeadOn when sanning channels then after some our Unraid crash and must do a cold reboot. Motherboard:Gigabyte B85M-DS3H Processor:Intel® Core™ i5-4690K Memory:16 GB Impossible to say what causes this with the info you have given. If you are using the latest tag, try the release-4.2 tag as that is the stable one. Latest is the development branch and will cause problems. Quote Link to comment
hbr245b Posted February 22, 2019 Share Posted February 22, 2019 I'm getting an error with this docker: mpegts: too much queued table input data (over 2MB) - tvheadend becomes unresponsive & I need to stop & start the docker to get it going again. A google search throws up a number of references on the tvheadend.org website but it's been down for the last 36 hours or so. Anyone know how to get in touch with tvheadend to let them know there's an issue with their website? Quote Link to comment
EdgarWallace Posted February 25, 2019 Share Posted February 25, 2019 I would like to pass my SAT>IP Server to the TVHEADEND docker. unRAID DVB is showing no DVB Adapter Driver, is this the reason, why I don't see any TV Adapter in TVHeadend docker? Do I need unRAID DVB at all? I was trying to use --satip_bindaddr in Extra Parameter but this avoid Docker start. Here is my log: https://pastebin.com/GhN8WSt7 Any great ideas how to use my sat>ip server with TVHeadend? Thank you very much. Quote Link to comment
alturismo Posted February 25, 2019 Share Posted February 25, 2019 (edited) 1 hour ago, EdgarWallace said: I would like to pass my SAT>IP Server to the TVHEADEND docker. unRAID DVB is showing no DVB Adapter Driver, is this the reason, why I don't see any TV Adapter in TVHeadend docker? Do I need unRAID DVB at all? I was trying to use --satip_bindaddr in Extra Parameter but this avoid Docker start. Here is my log: https://pastebin.com/GhN8WSt7 Any great ideas how to use my sat>ip server with TVHeadend? Thank you very much. no need for DVB Edition for Sat IP Tuners, i use an DD Net V2 and a Fritz 6490 as Sat IP source, what Sat IP Server do you have ? Edited February 25, 2019 by alturismo Quote Link to comment
EdgarWallace Posted February 25, 2019 Share Posted February 25, 2019 It is a Selfsat antenna which has the Satip server imbedded. Question is how to pass through the satip ip address. Quote Link to comment
j0nnymoe Posted February 25, 2019 Share Posted February 25, 2019 46 minutes ago, EdgarWallace said: It is a Selfsat antenna which has the Satip server imbedded. Question is how to pass through the satip ip address. Run tvheadend in host instead of bridge. As per the documentation: https://github.com/linuxserver/docker-tvheadend#host-vs-bridge Quote Link to comment
EdgarWallace Posted February 26, 2019 Share Posted February 26, 2019 Thanks to @j0nnymoe and @alturismo I was running tvheadend always in host mode and I have removed the DVB Edition. How do I remove the -p flag? Quote Host vs. Bridge If you use IPTV, SAT>IP or HDHomeRun, you need to create the container with --net=host and remove the -p flags. This is because of a limitation in docker and multicast. The docker is pulling the wrong IP address. 192.168.178.28 is the server address, the sat>ip address is 192.168.178.30. Adding --satip_binaddr into Extra Parameters is causing a docker crash. 2019-02-26 10:06:08.656 [ INFO] main: Log started 2019-02-26 10:06:08.656 [ INFO] http: Starting HTTP server 0.0.0.0:9981 2019-02-26 10:06:08.656 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982 2019-02-26 10:06:08.656 [ ERROR] satips: use --satip_bindaddr parameter to select the local IP for SAT>IP 2019-02-26 10:06:08.656 [ ERROR] satips: using Google lookup (might block the task until timeout) 2019-02-26 10:06:08.674 [ INFO] satips: Starting SAT>IP RTSP server 192.168.178.28:9983 2019-02-26 10:06:08.674 [ INFO] satips: SAT>IP Server initialized 2019-02-26 10:06:08.674 [ INFO] satips: HTTP 192.168.178.28:9981, RTSP 192.168.178.28:9983 Quote Link to comment
saarg Posted February 26, 2019 Share Posted February 26, 2019 (edited) 19 minutes ago, EdgarWallace said: Thanks to @j0nnymoe and @alturismo I was running tvheadend always in host mode and I have removed the DVB Edition. How do I remove the -p flag? The docker is pulling the wrong IP address. 192.168.178.28 is the server address, the sat>ip address is 192.168.178.30. Adding --satip_binaddr into Extra Parameters is causing a docker crash. 2019-02-26 10:06:08.656 [ INFO] main: Log started 2019-02-26 10:06:08.656 [ INFO] http: Starting HTTP server 0.0.0.0:9981 2019-02-26 10:06:08.656 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982 2019-02-26 10:06:08.656 [ ERROR] satips: use --satip_bindaddr parameter to select the local IP for SAT>IP 2019-02-26 10:06:08.656 [ ERROR] satips: using Google lookup (might block the task until timeout) 2019-02-26 10:06:08.674 [ INFO] satips: Starting SAT>IP RTSP server 192.168.178.28:9983 2019-02-26 10:06:08.674 [ INFO] satips: SAT>IP Server initialized 2019-02-26 10:06:08.674 [ INFO] satips: HTTP 192.168.178.28:9981, RTSP 192.168.178.28:9983 You don't need to remove the port mappings as unraid is smart enough to remove it when host is enabled. What you see in the log is tvheadend starting up it's satip server. It's not the selfsat server. You are using the wrong option. To set the satip server address you use the --satip_xml switch. There you supply the address to selfsats xml. Edited February 26, 2019 by saarg Quote Link to comment
EdgarWallace Posted February 26, 2019 Share Posted February 26, 2019 root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='tvheadend' --net='host' --log-opt max-size='10m' --log-opt max-file='1' --privileged=true -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -e 'TCP_PORT_9981'='9981' -e 'TCP_PORT_9983'='9983' -e 'PGID'='100' -e 'PUID'='99' -v '/mnt/cache/system/docker/appdata/tvheadend/':'/config':'rw' -v '/mnt/user/Recordings/':'/recordings':'rw' --satip_xml 192.168.178.30 'linuxserver/tvheadend' unknown flag: --satip_xml See 'docker run --help'. The command failed. Thanks @saarg the message appears when I am adding --satip_xml 192.168.178.30 which is the selfsat ip address. Quote Link to comment
saarg Posted February 26, 2019 Share Posted February 26, 2019 1 minute ago, EdgarWallace said: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='tvheadend' --net='host' --log-opt max-size='10m' --log-opt max-file='1' --privileged=true -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -e 'TCP_PORT_9981'='9981' -e 'TCP_PORT_9983'='9983' -e 'PGID'='100' -e 'PUID'='99' -v '/mnt/cache/system/docker/appdata/tvheadend/':'/config':'rw' -v '/mnt/user/Recordings/':'/recordings':'rw' --satip_xml 192.168.178.30 'linuxserver/tvheadend' unknown flag: --satip_xml See 'docker run --help'. The command failed. Thanks @saarg the message appears when I am adding --satip_xml 192.168.178.30 which is the selfsat ip address. I didn't read well enough your earlier posts. It's not going in the extra parameters field, it's an env variable. Check the Readme on github in the first post for the info. Did you try to push the discover satip servers in the satip server tab of tvheadend? Quote Link to comment
alturismo Posted February 26, 2019 Share Posted February 26, 2019 here is my variable full line is --satip_xml http://192.168.1.1:49000/satipdesc.xml Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.