September 17, 20169 yr I precleared a drive (let's call it drive A) and no issues were identified. I used drive A to replace an existing drive (drive B) and shortly after rebuild began unRAID disabled drive A and moved to emulation mode. 1. Looking at the log showed multiple prior and on-going errors. 2. Rebooting didn't change anything which didn't surprise me too much. 3. Prior to running SMART test I did a screen grab of drive A errors. Nothing catches my eye. I have other drives with worse. 4. I ran the short SMART test and it was "normal". 5. Swapped drive B back in but unRAID unhappy because drive B smaller than drive A (the drive unRAID had rejected). 6. Replaced drive B with third drive (drive C) and unRAID happily rebuilding array. Any thoughts? ron Log_2016.09.17.13.36.txt
Archived
This topic is now archived and is closed to further replies.