Jump to content
cpom1

cannot reassign drives

2 posts in this topic Last Reply

Recommended Posts

Hello,

 

i was attempting to replace one of hard drives that SMART reported errors. I followed the procedure for this on the wiki:

 

Stop the array

Unassign the old drive, if it's still assigned

Power down

[ Optional ] Pull the old drive (you may want to leave it installed for Preclearing or testing)

Install the new drive

Power on

Assign the new drive in the slot of the old drive

Go to the Main -> Array Operation section

Put a check in the Yes, I'm sure checkbox (next to the information indicating the drive will be rebuilt), and click the Start button

The rebuild will begin, with hefty disk activity on all drives, lots of writes on the new drive and lots of reads on all other drives

 

when i try to put all my disks back, it will not allow me to. so i cannot put back my 2 3tb disks. it sees them but will not allow me to assign them.

 

ive rebooted. put the old hard drive back in. tried different browsers. etc.

 

can someone help as one of these is actually my parity.

 

i've attached a picture so you can see.

 

thanks

unraid.PNG.5148d4415af24649289e1757085cc1b6.PNG

Share this post


Link to post

figured it out  :P

 

I have a new SAS drive.  How do I get unRAID to recognize and assign it?

Why can't unRAID find or add my SAS drive?

 

Assuming you are running unRAID 6.2, go to Settings -> Display Settings and change Display world-wide-name in device ID from Disabled to Automatic.  Click Apply then Done, and then go see if unRAID will let it be assigned!

 

http://lime-technology.com/forum/index.php?topic=48508.msg500313#msg500313

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.