Fire Posted October 7, 2016 Share Posted October 7, 2016 Hi there, i'm new to unRAID and did my first buid. I'm from Germany btw, so English is not my primary language. My old server was a plain Ubuntu Server NAS with ZFS, but it did not like the drives spinning all the time. So i switched My unRAID license is still on trial, i'll buy it later this month - here are my hardware specs: CPU: Intel® Xeon® Processor E3-1225 v5 (8M Cache, 3.30 GHz) Board: FUJITSU Mainboard D3446-S ATX (C236 Express Chipset) RAM: 16GB (2x Micron DIMM 8GB, DDR4-2400, CL17-17-17) Controller: LSI 9211-8i (it's a flashed IBM ServeRAID M1015, PCIe 2.0 x8) PSU: be quiet! Straight Power E9-CM 480W ATX 2.4 (80 PLUS Gold certified) OS: ADATA DashDrive UV131 16GB, USB 3.0 Case: Fractal Design Define XL USB 3.0 black, noise-insulated Parity: 3TB DualParity (3TB (DT01ABA300) + 3TB (HDS5C3030BLE630)) Data: 18TB (3x 3TB (DT01ABA300) + 3x 3TB (HDS5C3030BLE630)) Cache: 300GB RAID1 (1x SSDSA2CW300G3 + 1x SSDSC2BB300G4) SW: unRAID 6.2.1 (Lime Technology) Docker: Plex Media Server (linuxserver.io) Power: Idle with disk spun-down 40W, Data Load while parity creation 70W, peak idk Parity Check Duration/Speed: 7 hours, 7 minutes, 15 seconds. Average speed: 117.1 MB/sec Current ToDos are: UPS for safe shutdown on power loss, enabling standby S3 for more power saving. it's a little bit overpowered for Plex Media Server only at the moment, but maybe i'll use it for more in the future Do you have any recommendations for a small UPS? it sould be enough to shutdown the system, and be 100% compatible with unRAID, and available here in Germany. Second starter question would be: can i keep a copy (second drive) of my unRAID Flashdrive for backup purposes? So if the first fails, i just could swap them and turn on my NAS. Regards Quote Link to comment
Fire Posted October 7, 2016 Author Share Posted October 7, 2016 Photos will follow this evening Quote Link to comment
mr-hexen Posted October 17, 2016 Share Posted October 17, 2016 Clean setup (wire mgmt). Just a heads up about those SATA power adapters... https://lime-technology.com/forum/index.php?topic=52573.0 Quote Link to comment
Fire Posted October 17, 2016 Author Share Posted October 17, 2016 i dont like my power cableing ... i already ordered new cables from beQuiet for direct connection Quote Link to comment
jbartlett Posted October 18, 2016 Share Posted October 18, 2016 I'm using the mid-tower version of this case, the foam works! Quote Link to comment
snuffy1pro Posted October 19, 2016 Share Posted October 19, 2016 Do you have any recommendations for a small UPS? Regards Hello, this is what I use. APC BX1300G http://www.newegg.com/Product/Product.aspx?Item=N82E16842101492 I've tested it and it works well. APC is owned by Schneider Electric which is a French company, so you should be able to get ahold of APC backups. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.