October 10, 20169 yr Hey all, I am running unRAID v6.2.1 and recently had the main cache drive of my 2 cache drive raid 1 setup fail. I purchased a new cache drive, attached it, and ran a balance. I thought everything was running fine until I went to do a manual trim and noticed it is consistently only trimming 48 kilobytes. Both drives are Samsung 850 EVO 250GB SSD drives. Is there any way I can get trim running properly without backing up the data, formatting the drives, and re-doing my docker image? Here is my drive and raid 1 info: btrfs filesystem show: Total devices 2 FS bytes used 91.01GiB devid 1 size 232.89GiB used 232.88GiB path /dev/sdh1 devid 2 size 232.89GiB used 232.88GiB path /dev/sdi1 btrfs filesystem df: Data, RAID1: total=230.85GiB, used=90.32GiB System, RAID1: total=32.00MiB, used=64.00KiB Metadata, RAID1: total=2.00GiB, used=702.25MiB GlobalReserve, single: total=240.00MiB, used=0.00B Edit: Ended up copying all data to a data drive via midnight commander, formatting the cache drives to riser, then setting them up again as btfrs. Fun times!
Archived
This topic is now archived and is closed to further replies.