October 15, 20169 yr Just got myself a used Dell H310 card. Can someone point me in direction of a good tutorial showing how to flash this card to handle just JBOD mode. Thanks
October 16, 20169 yr http://lime-technology.com/forum/index.php?topic=12767.msg259006#msg259006 Step-by step in is in the zip file referenced in the post. I just did this myself for the first time a few days ago. I had the "failed to initialize PAL" error at step 5, but luckily I had another PC on hand I could use to finish the procedure.
October 17, 20169 yr Considering it should be a straight-forward procedure it does seem unnecessarily complicated. I suppose most people accept this because it's a one off process, but it is annoying that to be sure of being able to complete it you almost need to have a spare motherboard standing by.
October 17, 20169 yr Author Considering it should be a straight-forward procedure it does seem unnecessarily complicated. I suppose most people accept this because it's a one off process, but it is annoying that to be sure of being able to complete it you almost need to have a spare motherboard standing by. Indeed I did need a second computer. First It wouldn't boot with the card in, and after reading a few forums posts found out that I had to cover the B side 5 and 6 pins with electrical tape. I then also ran into booting trouble with my UEFI based mobo. Tried using the added shell but when I went to clean the OEM firmware with megarec it kepted stalling after entering "megarec -writesbr 0 sbrempty.bin". Pulled out my 10 yr old AMD system that has been sitting in my closet for years. Popped it in...voila worked...megarec...worked cleared firmware...and sas2flsh loaded the latest one onto the card. Works now.
Archived
This topic is now archived and is closed to further replies.