October 17, 20169 yr My ESXI setup has been rock solid for the last several years. The other day the power went out - when it came back on unraid shows all drives missing. I have done everything I can think of - everything has been running so smoothly for so long I am not pretty rusty on trying to fix this. The Supermicro system see's the controllers on bootup. Was there a bios setting for the controllers? Please help. What can I do?
October 17, 20169 yr Been a long time for me too. I think the bios for the cards is "ctrl-H" (maybe "cntr-C"? - it should pop up on the screen during boot) Check to see if ESXI still has them available for passthru ->"configure ->Advanced Settings" Also check the VM settings still shows the 3 cards passed thru?
October 17, 20169 yr Author Control-C. I get a message that the configuration has changed and that the bios may need to be setup. In the bios settings of the LSI cards, If I go into the BIOS. There are options to enable only bios, only is, and both Bios and OS. What should that setting be? Each controller sees all 8 of the attached drives in the bios. ESXI also sees the controllers and I have them set to pass through. I just don't know what to do.
October 17, 20169 yr Author Tried everything I could - finally thought I should check Un-raid for updates. I was running 6.2. I installed 6.2.1 and fixed!
Archived
This topic is now archived and is closed to further replies.