Dockers stopped working

[extremeaudio]

All of a sudden a couple of dockers have stopped working.

 

Couchpotato for instance will not start and gives an execution error if I try to start it. Log says -

 

Error running logs job: open /var/lib/docker/containers/80cf67e029fb7b2cb682be1aac364360ca08a281a5a87d6fee381a4de542a964/80cf67e029fb7b2cb682be1aac364360ca08a281a5a87d6fee381a4de542a964-json.log: read-only file system

 

Please help

[Squid]

Post your diagnostics

 

Sent from my LG-D852 using Tapatalk

 

 

[extremeaudio]

Log attached

syslog.zip

[trurl]

Log attached

syslog is not your diagnostics. Go to Tools - Diagnostics and post the complete diagnostics zip.

 

Also, why are you not fixing these things noted by Fix Common Problems?

Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share images is set for both included (disk4) and excluded (disk1,disk2,disk3) disks
Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share Photos is set for both included (disk4) and excluded (disk1,disk2,disk3) disks
Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share RippedMovies is set for both included (disk4) and excluded (disk1,disk2,disk3) disks
Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share TVShows is set for both included (disk3) and excluded (disk1,disk2,disk4) disks
Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share Videos is set for both included (disk4) and excluded (disk1,disk2,disk3) disks
Oct 31 16:26:12 iServe root: Fix Common Problems: Warning: Share X is set for both included (disk4) and excluded (disk1,disk2,disk3) disks

There is never any good reason to set both include and exclude.

 

Looks like you have some problem with your cache disk

Oct 31 16:25:59 iServe kernel: ata5.00: ATA-9: WDC WD5000LPVX-00V0TT0,      WD-WXA1A455S83D, 01.01A01, max UDMA/133
...
Oct 31 16:26:02 iServe emhttp: WDC_WD5000LPVX-00V0TT0_WD-WXA1A455S83D (sdf) 488386552
...
Oct 31 16:26:02 iServe emhttp: import 30 cache device: sdf
...
Oct 31 16:43:45 iServe kernel: ata5.00: exception Emask 0x50 SAct 0x20 SErr 0x280900 action 0x6 frozen
Oct 31 16:43:45 iServe kernel: ata5.00: irq_stat 0x08000000, interface fatal error
Oct 31 16:43:45 iServe kernel: ata5: SError: { UnrecovData HostInt 10B8B BadCRC }
Oct 31 16:43:45 iServe kernel: ata5.00: failed command: READ FPDMA QUEUED
Oct 31 16:43:45 iServe kernel: ata5.00: cmd 60/20:28:e0:20:d1/00:00:05:00:00/40 tag 5 ncq 16384 in
Oct 31 16:43:45 iServe kernel:         res 40/00:2c:e0:20:d1/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
Oct 31 16:43:45 iServe kernel: ata5.00: status: { DRDY }
Oct 31 16:43:45 iServe kernel: ata5: hard resetting link
...

and lots more like that.

 

If we had your diagnostics we might be able to tell more.

[extremeaudio]

Oh, I didnt know this new diagnostics bit. Attached

diagnostics-20161103-1322.zip

[trurl]

There is no SMART for you cache disk in the diagnostics. Maybe a bad connection. Try to fix it and then post another diagnostic.

[extremeaudio]

I removed and re seated all the cables

 

I tried to re install all dockers by deleting the docker image. But the docker installation fails with a read only file system error. Diagnostics attached.

diagnostics-20161106-1750.zip

[Squid]

Its the exact same problem as before (actually, if anything its worse than before)... Implies cabling.  Try a different cable and/or port

 

Maybe also *very lightly* and carefully, clean the contacts on the drive with some contact cleaner.  Or replace the drive..

[extremeaudio]

Now?

diagnostics-20161109-1651.zip

[Squid]

Looks Clean, but the diagnostics were immediately after starting the array

[extremeaudio]

Some dockers working ok, others wont start. New diagnostics attached.

diagnostics-20161109-2239.zip

[extremeaudio]

Some help here please?

[trurl]

Your latest diagnostic is 6 days old and doesn't show much. If it has been running since then maybe a new diagnostic will have a lot more to show.