[Support] Linuxserver.io - Cardigann


Recommended Posts

linuxserver_medium.png

 

Application Name: Cardigann

Application Site:  https://github.com/cardigann/cardigann/

Docker: https://hub.docker.com/r/linuxserver/cardigann/

Github: https://github.com/linuxserver/docker-cardigann

 

Please post any questions/issues relating to this docker you have in this thread.

 

If you are not using Unraid (and you should be!) then please do not post here, instead head to linuxserver.io to see how to get support

 

Edited by linuxserver.io
Link to comment
  • 3 weeks later...

Hello,

 

I want to be able to use one of the trackers for couchpotato,

i have successfully searched and find results on cardigann but i can't get it to work in couchpotato.

 

How am i suppose to conffigure it in couchpotato - > settings -> sercher ?

 

using TorrentPotato?

 

Thank you

Link to comment

Hello,

 

I want to be able to use one of the trackers for couchpotato,

i have successfully searched and find results on cardigann but i can't get it to work in couchpotato.

 

How am i suppose to conffigure it in couchpotato - > settings -> sercher ?

 

using TorrentPotato?

 

Thank you

 

No idea.  Better off asking in couchpotato forum or torrentpotato if you get no replies from anyone else here.

Link to comment

Hello,

 

I want to be able to use one of the trackers for couchpotato,

i have successfully searched and find results on cardigann but i can't get it to work in couchpotato.

 

How am i suppose to conffigure it in couchpotato - > settings -> sercher ?

 

using TorrentPotato?

 

Thank you

 

No idea.  Better off asking in couchpotato forum or torrentpotato if you get no replies from anyone else here.

Under the TorrentPotato section you put in the TorrentPotato link for that tracker from Cardigann into the host field. You then put the Cardigann API key into the Pass key field. Leave the username field blank (I haven't seen anything require this field).

Make sure the box at the begginning of the field next to host is checked as this shows that you want to enable that searcher. That should be all you need.

Link to comment
  • 2 weeks later...

First I would kindly like to thank you for this docker.

I would also like to know how to add the trackers mentioned in the github as they are n.a. in the docker web interface. I am particularly interested in https://www.worldofp2p.net/index.php tracker which should be supported but cannot find it as an option.

 

Thank you in advance.

 

Alexandro, I'm afraid I don't know, we don't necessarily use the apps, we just make the docker.  Probably best to have a look here and see if that helps at all.  https://github.com/cardigann/cardigann/

Link to comment

Have installed this and I am unable to get any trackers working.

 

 

Seen this in the log

 

 


[cont-init.d] 10-adduser: exited 0.
[cont-init.d] 30-config: executing...
[cont-init.d] 30-config: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
time="2016-12-03T12:18:18-05:00" level=info msg="Cardigann v1.9.4"
time="2016-12-03T12:18:18-05:00" level=info msg="Reading config from /config/config.json"
time="2016-12-03T12:18:18-05:00" level=info msg="Found 4 indexers enabled in configuration"
time="2016-12-03T12:18:18-05:00" level=info msg="Listening on 0.0.0.0:5060"
? Testing indexer demonoid at http://www.dnoid.me/
Testing required config is available [32mSUCCESS ?[0m [37min 437.722µs[0m
Testing login with valid credentials [31mFAILURE ?[0m [37min 20.002423302s[0m
? Indexer demonoid [31mFAILED[0m with [31mNo working urls found[0m
time="2016-12-03T12:21:01-05:00" level=warning msg="URL check failed" error="Get http://www.dnoid.me/: dial tcp: lookup www.dnoid.me on 192.168.1.1:53: read udp 192.168.1.152:43470->192.168.1.1:53: i/o timeout" site=demonoid


time="2016-12-03T12:21:01-05:00" level=error msg="Test failed" error="No working urls found"


time="2016-12-03T12:21:16-05:00" level=warning msg="URL check failed" error="Get https://eztv.ag/: dial tcp: lookup eztv.ag on 192.168.1.1:53: read udp 192.168.1.152:36896->192.168.1.1:53: i/o timeout" site=eztv


time="2016-12-03T12:23:23-05:00" level=warning msg="URL check failed" error="Get https://thepiratebay.org/: dial tcp: lookup thepiratebay.org on 192.168.1.1:53: read udp 192.168.1.152:33165->192.168.1.1:53: i/o timeout" site=thepiratebay


time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay


time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay


time="2016-12-03T12:24:03-05:00" level=warning msg="URL check failed" error="Get https://tproxy.pro/: dial tcp: lookup tproxy.pro on 192.168.1.1:53: read udp 192.168.1.152:53668->192.168.1.1:53: i/o timeout" site=thepiratebay

Link to comment
  • 3 weeks later...
  • 2 weeks later...

Greetings,

 

is there a setup and config guide for this docker? I am currently using CP and Deluge (may add sonar soon).

 

also jackett, cardigan, or both?

 

Cheers!

 

Far as setup guide, the GUI is pretty easy to use (not as flashy as Jackett though).  I transferred all my stuff over from Jackett, and it's been working fine for me so far.  MUCH more stable than Jackett on my system as well (Jackett required me to restart it every few days, it would stop responding to polls and the UI).  Also, resources-wise it feels lighter than Jackett.

Link to comment
  • 3 weeks later...

Just set this app and so far it's pretty nice.  I have been on the official github and noticed that there have been a lot of updates in the current version, some of which I would like to use.  I'm pretty new to docker, so I haven't seen how often these get updated.  Anyway, any chance we will be seeing a new docker with a new version of cardigann on here soon?

Link to comment
  • 10 months later...
  • 3 months later...
On 11/30/2017 at 1:40 PM, xhaloz said:

Is there anyway to run this with a HTTPS or SOCKS5 proxy?  

Not a lot of activity in this thread. Anyone figure out how to get cardigann working with privoxy?

 

On github it says:

 

Quote

Using with a Proxy

Currently either a SOCKS5 proxy like Privoxy or Tor can be used:

SOCKS_PROXY=localhost:1080 cardigann server

Or, an http proxy works too:

HTTP_PROXY=localhost:8080 cardigann server

If you are running as a service, you will need to manually edit the service files to set the environment.

 

But I'm not clear where that goes? in the config.json? is it some sort of startup command?

 

Edit: I created a new variable, where key = "HTTP_PROXY" and the value = "<my server ip>:8118" and it seems to have done the trick. Not that I can really test it in this case. I just have to assume it is working :)

Edited by Kewjoe
Link to comment
  • 1 year later...

Anyone still running this docker? When I try to go to the web address [IP]:5060 it doesn't connect to anything.

 

The log appears as if it is running:

time="2020-12-01T21:32:30-05:00" level=info msg="Cardigann dev"
time="2020-12-01T21:32:30-05:00" level=info msg="Reading config from /.config/cardigann/config.json"
time="2020-12-01T21:32:30-05:00" level=info msg="Found 0 indexers enabled in configuration"
time="2020-12-01T21:32:30-05:00" level=info msg="Listening on 0.0.0.0:5060"

I can get a console and run a query, though it errors out because I don't have anything configured.

 

suggestions?

 

 

Update: port 5060 is blocked by current browsers so I changed the host port from 5060 to 5070 in the settings and it works fine now.

Edited by lovingHDTV
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.