I recently rebuilt my box in a new case, added some new drives, etc. Afterwards my performance has been horrible. GUI is unresponsive, hangs, I'm having trouble with Plex containers (I have tried several), I have to reboot it at least daily.

 

This morning I have spent 4 hours trying to get Plex to work. Adding the container can take 10+ minutes, deleting a container can take 30+ minutes and these time aren't including the time the GUI hangs or is unresponsive and I have to forcefully reboot. Just taking the array off-line can be 10+ minutes.

 

Often when rebooting the system loads normally, and the monitor attached to the box has the login prompt. Accessing the GUI through another computer on the network gets a 404 error. I have to reboot and try again.

 

One odd thing I have noticed is that when I come back from a reboot the Main page always has the full 24 slots listed even though I change it to 9 slots every time. Is that an indication of something?

 

Any ideas what the problem is would be greatly appreciated. For those willing to help I only have a very basic understanding of the command line (I can type in what you tell me and tell you what the result is). I really hope this is something small and stupid I have overlooked.

 

Syslog and diagnostics zip attached.

 

Specs:

syslog.txt

bobafett-diagnostics-20161102-1416.zip

One odd thing I have noticed is that when I come back from a reboot the Main page always has the full 24 slots listed even though I change it to 9 slots every time. Is that an indication of something?

 

If changes aren't being remembered the first thing I'd do is shutdown and take out the boot flash device, plug it into another computer and check it for corruption.