stuck in "IOMMU: Disabled" with cpu support vt-x after turned vt-x on

[cyp85120]

hi guys , i'm new to unraid , i build my system with asus x99-e ws board , e5 2682v4 cpu , 2x16 ddr 2400 ram, 2x256g ssd and 2x3TB hard drive, 2x gtx 980ti video cards.

 

when i first get into unraid and setup a win10 VM, i found only the "VNC" in graphic card, and can't find my 980ti video card .then i checked that ,my cpu support the vt-x and i have turned it on in the bios. then i checked my system info in unraid, shows that IOMMU : Disabled. I don't why, could anybody gives some help? i just want to know where the problem is , and how to fix it... thx a lot.

 

here is the system info and Diagnostics files :

 

Model: Custom

M/B: ASUSTeK COMPUTER INC. - X99-E WS

CPU: Intel® Xeon® CPU E5-2682 v4 @ 2.50GHz

HVM: Enabled

IOMMU: Disabled

Cache: 1024 kB, 4096 kB, 40960 kB

Memory: 32 GB (max. installable capacity 512 GB)

Network: bond0: fault-tolerance (active-backup), mtu 1500

eth0: 1000 Mb/s, full duplex, mtu 1500

eth1: not connected

Kernel: Linux 4.4.30-unRAID x86_64

OpenSSL: 1.0.2j

Uptime:

tower-diagnostics-20161106-0207.zip

[saarg]

hi guys , i'm new to unraid , i build my system with asus x99-e ws board , e5 2682v4 cpu , 2x16 ddr 2400 ram, 2x256g ssd and 2x3TB hard drive, 2x gtx 980ti video cards.

 

when i first get into unraid and setup a win10 VM, i found only the "VNC" in graphic card, and can't find my 980ti video card .then i checked that ,my cpu support the vt-x and i have turned it on in the bios. then i checked my system info in unraid, shows that IOMMU : Disabled. I don't why, could anybody gives some help? i just want to know where the problem is , and how to fix it... thx a lot.

 

here is the system info and Diagnostics files :

 

Model: Custom

M/B: ASUSTeK COMPUTER INC. - X99-E WS

CPU: Intel® Xeon® CPU E5-2682 v4 @ 2.50GHz

HVM: Enabled

IOMMU: Disabled

Cache: 1024 kB, 4096 kB, 40960 kB

Memory: 32 GB (max. installable capacity 512 GB)

Network: bond0: fault-tolerance (active-backup), mtu 1500

eth0: 1000 Mb/s, full duplex, mtu 1500

eth1: not connected

Kernel: Linux 4.4.30-unRAID x86_64

OpenSSL: 1.0.2j

Uptime:

 

You only enabled Intel virtualization technology in the advanced menu?

You have to go to advanced > system agent configuration and enable vt-d also.

[cyp85120]

  ;D THANKS!!! problem solved after i turn on the vt-d!