ebnerjoh Posted July 24, 2019 Share Posted July 24, 2019 Hi, was there recently a change on Letsencrypt? Today my websites were broken, because the certificate was not renewed. Last Renewal was in April. In the Logs I cannot find an relating error, of course there are warnings, but I do not think they are responsible for the issue. ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io We gratefully accept donations at: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... using keys found in /config/keys [cont-init.d] 30-keygen: exited 0. [cont-init.d] 50-config: executing... Variables set: PUID=99 PGID=100 TZ=Europe/Berlin URL=familie-ebner.at SUBDOMAINS=cloud,tauchen,solar,ha,solar2,nr,nr2,wetter,wetter2,mqtt, EXTRA_DOMAINS=cloud.ff-metnitz.at,slideshow.ff-metnitz.at,backup.ff-metnitz.at, ONLY_SUBDOMAINS=true DHLEVEL=2048 VALIDATION=http DNSPLUGIN= [email protected] STAGING= 2048 bit DH parameters present SUBDOMAINS entered, processing SUBDOMAINS entered, processing Only subdomains, no URL in cert Sub-domains processed are: -d cloud.familie-ebner.at -d tauchen.familie-ebner.at -d solar.familie-ebner.at -d ha.familie-ebner.at -d solar2.familie-ebner.at -d nr.familie-ebner.at -d nr2.familie-ebner.at -d wetter.familie-ebner.at -d wetter2.familie-ebner.at -d mqtt.familie-ebner.at EXTRA_DOMAINS entered, processing Extra domains processed are: -d cloud.ff-metnitz.at -d slideshow.ff-metnitz.at -d backup.ff-metnitz.at E-mail address entered: [email protected] http validation is selected Certificate exists; parameters unchanged; starting nginx [cont-init.d] 50-config: exited 0. [cont-init.d] 99-custom-files: executing... [custom-init] no custom files found exiting... [cont-init.d] 99-custom-files: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/ha.familie-ebner.at:42 nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/mqtt.familie-ebner.at:42 nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/nr.familie-ebner.at:42 nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/nr2.familie-ebner.at:42 nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/wetter.familie-ebner.at:42 nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /config/nginx/site-confs/wetter2.familie-ebner.at:42 nginx: [alert] detected a LuaJIT version which is not OpenResty's; many optimizations will be disabled and performance will be compromised (see https://github.com/openresty/luajit2 for OpenResty's LuaJIT or, even better, consider using the OpenResty releases from https://openresty.org/en/download.html) nginx: [error] lua_load_resty_core failed to load the resty.core module from https://github.com/openresty/lua-resty-core; ensure you are using an OpenResty release from https://openresty.org/en/download.html (rc: 2, reason: module 'resty.core' not found: no field package.preload['resty.core'] no file './resty/core.lua' no file '/usr/share/luajit-2.1.0-beta3/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/5.1/resty/core.lua' no file '/usr/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/common/resty/core.lua' no file '/usr/share/lua/common/resty/core/init.lua' no file './resty/core.so' no file '/usr/local/lib/lua/5.1/resty/core.so' no file '/usr/lib/lua/5.1/resty/core.so' no file '/usr/local/lib/lua/5.1/loadall.so' no file './resty.so' no file '/usr/local/lib/lua/5.1/resty.so' no file '/usr/lib/lua/5.1/resty.so' no file '/usr/local/lib/lua/5.1/loadall.so') nginx: [warn] conflicting server name "wetter.familie-ebner.at" on 0.0.0.0:80, ignored nginx: [warn] conflicting server name "wetter2.familie-ebner.at" on 0.0.0.0:80, ignored nginx: [warn] conflicting server name "wetter.familie-ebner.at" on 0.0.0.0:443, ignored nginx: [warn] conflicting server name "wetter2.familie-ebner.at" on 0.0.0.0:443, ignored Server ready Quote Link to comment
ebnerjoh Posted July 24, 2019 Share Posted July 24, 2019 Hi, I have reverted back now the letsencrypt version, and I was able to fix all errors and warnings, except the last 4 warnings. But the certs are still not updated. Br, Johannes Quote Link to comment
saarg Posted July 24, 2019 Share Posted July 24, 2019 25 minutes ago, ebnerjoh said: Hi, I have reverted back now the letsencrypt version, and I was able to fix all errors and warnings, except the last 4 warnings. But the certs are still not updated. Br, Johannes Do you turn off the server at night? The renewal script is running at night. You could try to add a subdomain and see if your certificate is renewed. If it is, remove the added subdomain. Quote Link to comment
ebnerjoh Posted July 24, 2019 Share Posted July 24, 2019 7 minutes ago, saarg said: Do you turn off the server at night? The renewal script is running at night. You could try to add a subdomain and see if your certificate is renewed. If it is, remove the added subdomain. Hi, no, I am not shutting down. I got it now working by reverting back to an older Letsencrypt installation and running a "certbot renew" in the Docker-CLI. I need to look in detail when I have more time. Quote Link to comment
saarg Posted July 24, 2019 Share Posted July 24, 2019 1 hour ago, ebnerjoh said: Hi, no, I am not shutting down. I got it now working by reverting back to an older Letsencrypt installation and running a "certbot renew" in the Docker-CLI. I need to look in detail when I have more time. Don't run certbot manually. Simply adding or removing a subdomain is enough to trigger a renewal. Quote Link to comment
aptalca Posted July 24, 2019 Share Posted July 24, 2019 4 hours ago, ebnerjoh said: Hi, no, I am not shutting down. I got it now working by reverting back to an older Letsencrypt installation and running a "certbot renew" in the Docker-CLI. I need to look in detail when I have more time. Letsencrypt renewal attempt logs are in the config folder Quote Link to comment
zer0zer0 Posted July 25, 2019 Share Posted July 25, 2019 Trying to get the Letsencrypt container working with a very standard setup but it doesn't seem to be listening on any ports. I have the docker container configured with a bridge network, and port 81 and 444, with no conflicts. Once it's running should I then be able to hit <UNRAIDIP>:81 and <UNRAIDIP>:444 ?? Or do a netstat inside the docker container and see it listening on those ports? My port forwards from the outside are perfect but it's definitely not listening like I would expect Quote Link to comment
saarg Posted July 26, 2019 Share Posted July 26, 2019 7 hours ago, zer0zer0 said: Trying to get the Letsencrypt container working with a very standard setup but it doesn't seem to be listening on any ports. I have the docker container configured with a bridge network, and port 81 and 444, with no conflicts. Once it's running should I then be able to hit <UNRAIDIP>:81 and <UNRAIDIP>:444 ?? Or do a netstat inside the docker container and see it listening on those ports? My port forwards from the outside are perfect but it's definitely not listening like I would expect Hard for us to say anything when you haven't posted any log, docker run command or screenshot of port forwarding. The nginx part isn't started until the certificate is created Quote Link to comment
j0nnymoe Posted July 26, 2019 Share Posted July 26, 2019 2 hours ago, saarg said: Hard for us to say anything when you haven't posted any log, docker run command or screenshot of port forwarding. The nginx part isn't started until the certificate is created 🔮🔮🔮🔮 Quote Link to comment
zer0zer0 Posted July 26, 2019 Share Posted July 26, 2019 (edited) 9 hours ago, saarg said: Hard for us to say anything when you haven't posted any log, docker run command or screenshot of port forwarding. The nginx part isn't started until the certificate is created All I needed to know is if it should be listening or not, and you answered that perfectly! Thank you I also noticed the actual container ports were stuck on port 81/444 for some reason, so I deleted and recreated it and it started up listening on 80/443, and also switched to dns validation, and things are working as expected now Edited July 26, 2019 by zer0zer0 Quote Link to comment
FireFtw Posted July 28, 2019 Share Posted July 28, 2019 The only left over annoying part of this is going to 'jellyfin.website.com' doesn't redirect so it doesn't work. you have to manually enter in 'https://jellyfin.website.com'. I think I'm probably just missing a setting in NGINX but I haven't been able to find anything, anybody know how to fix this? Quote Link to comment
aptalca Posted July 28, 2019 Share Posted July 28, 2019 1 hour ago, FireFtw said: The only left over annoying part of this is going to 'jellyfin.website.com' doesn't redirect so it doesn't work. you have to manually enter in 'https://jellyfin.website.com'. I think I'm probably just missing a setting in NGINX but I haven't been able to find anything, anybody know how to fix this? Check the top of the default site config Quote Link to comment
Kosmatik Posted July 28, 2019 Share Posted July 28, 2019 (edited) Hello, Has anyone been able to use pagespeed module with this container, as in just getting a so into the appadata folder and having nginx load it. Edited July 28, 2019 by Kosmatik Quote Link to comment
capino Posted July 31, 2019 Share Posted July 31, 2019 Since a few weeks i'm using GeoIP2, but after the last two container updates, GeoLit2-City.mmdb couldn't been found. In the container log I see the following message: [emerg] MMDB_open("/var/lib/libmaxminddb/GeoLite2-City.mmdb") failed - Error opening the specified MaxMind DB file in /config/nginx/nginx.conf:36. After manualy running .//etc/periodic/weekly/libmaxminddb everything works again. Quote Link to comment
aptalca Posted July 31, 2019 Share Posted July 31, 2019 6 hours ago, capino said: Since a few weeks i'm using GeoIP2, but after the last two container updates, GeoLit2-City.mmdb couldn't been found. In the container log I see the following message: [emerg] MMDB_open("/var/lib/libmaxminddb/GeoLite2-City.mmdb") failed - Error opening the specified MaxMind DB file in /config/nginx/nginx.conf:36. After manualy running .//etc/periodic/weekly/libmaxminddb everything works again. I have a theory about that. Can you create an issue on the GitHub repo so we can track it easier? Quote Link to comment
crgcputech79 Posted August 1, 2019 Share Posted August 1, 2019 (edited) hey guys!, i hope im in the right place as i am a noob to unraid and dockers which are awesome so far in my experience, i am trying to use this docker to install the web panel open game panel and i am missing php dependencies. here is what it is saying its missing, any ideas on how to make it work? is it an unraid issue or can it be added to this docker? any help is appreciated. Checking required file permissions: includes/config.inc.phpOK modules/TS3Admin/templates_cOK Checking PHP version: PHP Version >= 5.37.3.6 Checking required modules: PHP XML-RPC moduleNot found PHP Curl moduleFound PHP XML ReaderFound PHP JSON ExtensionFound PHP Zip ExtensionFound PHP mbstring ExtensionFound Pear XXTEA Found Pear Not found file_get_contents() Found allow_url_fopen=on Found Checking optional modules: PHP BCMath ExtensionNot found. Thanks Edited August 1, 2019 by crgcputech79 Quote Link to comment
aptalca Posted August 1, 2019 Share Posted August 1, 2019 34 minutes ago, crgcputech79 said: hey guys!, i hope im in the right place as i am a noob to unraid and dockers which are awesome so far in my experience, i am trying to use this docker to install the web panel open game panel and i am missing php dependencies. here is what it is saying its missing, any ideas on how to make it work? is it an unraid issue or can it be added to this docker? any help is appreciated. Checking required file permissions: includes/config.inc.phpOK modules/TS3Admin/templates_cOK Checking PHP version: PHP Version >= 5.37.3.6 Checking required modules: PHP XML-RPC moduleNot found PHP Curl moduleFound PHP XML ReaderFound PHP JSON ExtensionFound PHP Zip ExtensionFound PHP mbstring ExtensionFound Pear XXTEA Found Pear Not found file_get_contents() Found allow_url_fopen=on Found Checking optional modules: PHP BCMath ExtensionNot found. Thanks You can request php modules to be added and unless they're really fringe cases, we add them. What exactly are you trying to set up? Quote Link to comment
JonathanM Posted August 1, 2019 Share Posted August 1, 2019 8 hours ago, aptalca said: What exactly are you trying to set up? 9 hours ago, crgcputech79 said: i am trying to use this docker to install the web panel open game panel https://github.com/OpenGamePanel Quote Link to comment
Riotz Posted August 1, 2019 Share Posted August 1, 2019 Can anyone please tell me why I am seeing these wget errors in my log? Also any change of getting php7_ladap added to the container? Thanks, Quote Link to comment
crgcputech79 Posted August 1, 2019 Share Posted August 1, 2019 (edited) 20 hours ago, aptalca said: You can request php modules to be added and unless they're really fringe cases, we add them. What exactly are you trying to set up? open game panel- web panel, this is what it states that is missing. Edited August 1, 2019 by crgcputech79 Quote Link to comment
aptalca Posted August 1, 2019 Share Posted August 1, 2019 7 hours ago, Riotz said: Can anyone please tell me why I am seeing these wget errors in my log? Also any change of getting php7_ladap added to the container? Thanks, Looks like attempts to update the geoip db are failing. Harmless but we'll look into it 1 Quote Link to comment
Tucubanito07 Posted August 2, 2019 Share Posted August 2, 2019 Hey Guys, I have a quick question. I had @CHBMB help me a couple of months ago. I wanted to know if is possible to always have the (Subdomain www,) to always be deleted? The reason why is because every time I update the docker it always comes back and I have to deleted in order for the docker to work or how can I make it work with the (Subdomain www,)? Thanks in advance. Quote Link to comment
Riotz Posted August 2, 2019 Share Posted August 2, 2019 19 hours ago, aptalca said: Looks like attempts to update the geoip db are failing. Harmless but we'll look into it Thanks so much. What about php7_ldap integration into the container? Would really love to use the PLEX for LDAP container with my Wordpress sites. Thanks again, Quote Link to comment
aptalca Posted August 2, 2019 Share Posted August 2, 2019 43 minutes ago, Riotz said: Thanks so much. What about php7_ldap integration into the container? Would really love to use the PLEX for LDAP container with my Wordpress sites. Thanks again, We can add that, too if it doesn't add too much bloat Quote Link to comment
Riotz Posted August 2, 2019 Share Posted August 2, 2019 22 minutes ago, aptalca said: We can add that, too if it doesn't add too much bloat Awesome! Thanks so much. Will make this Wordpress project seamless having that integrated. And, allow me to use that user credential database for other services. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.