Hi

I'm looking at building a new server and wanted to get some advice please, especially regarding CPU, mobo and RAM compatibility. It'll be a NAS with a few dockers and a WHS VM to start. Not looking at gaming or anything (yet). Below is the parts list. If there are any obvious errors or suggestions could people let me know please?

 

Case: Norco RPC-4224 - http://www.techbuy.com.au/p/149123/CASINGS_SERVER_-_4U/Norco/RPC-4224.asp

Fan Wall: 120mm fan wall bracket - http://www.techbuy.com.au/p/152644/CASINGS_SERVER_-_ACCESSORIES/Norco/120mmFANBRACKET.asp

Rails: Norco 26" Sliding Rail Kit - http://www.techbuy.com.au/p/125973/CASINGS_SERVER_-_ACCESSORIES/Norco/RL-26.asp

 

Motherboard: SuperMicro ATX X10SRL-F-O - http://www.newegg.com/global/au/Product/Product.aspx?Item=N82E16813182927&cm_re=X10SRL-F-O-_-13-182-927-_-Product

RAM: 2 x Crucial 16GB DDR4 CT16G4RFD4213 (32 GB total) - https://www.mwave.com.au/product/open-box-crucial-16gb-1x-16gb-ddr4-2133mhz-registered-ecc-memory-ct16g4rfd42-ab81314

CPU: Intel Xeon E5-2683 v3 Haswell 2.0GHz (eBay)

Parity: 2 x WD RED 4GB

Data Drives: 5 x WD RED 4GB

Cache Drives: 2 x Samsung 250GB SSD 850 EVO Crucial MX300 525GB - https://www.ozbargain.com.au/node/277186

Flash: (TBA)

Video Card: (TBA)

Power Supply: SeaSonic X-850 850W EVGA SuperNOVA 750 P2 - http://www.megabuy.com.au/evga-supernova-p2-750w-psu-p724155.html

 

SAS Card: 2 x M1015

SAS: 4 x Monoprice 1m Mini SAS SFF-8087

SATA to SAS: 2 x SATA to SFF-8087 Reverse breakout cable - http://www.techbuy.com.au/p/125971/CABLES_DRIVE_-_SATA/Norco/C-SFF8087-4S.asp

 

Rear Fans: Noctua NF-A8 PWM - https://www.umart.com.au/newsite/goods.php?id=30167

Fan Wall: 3 x  Antec  Tricool 120mm - already have these

CPU Heatsink: Noctua NH-U9DX i4 - https://www.umart.com.au/newsite/goods.php?id=27931

Why don't you use the tools at PC Parts Picker to check compatibility?  The website is here:

 

      https://pcpartpicker.com/

Why don't you use the tools at PC Parts Picker to check compatibility?  The website is here:

 

      https://pcpartpicker.com/

The SuperMicro ATX X10SRL-F-O isn't on there unfortunately.

 

Edit: It does have the X10SRA, however, and that's compatible with the memory. That's the same generation and very similar so I think I'm good to go. Thanks for the suggestion.