Fire Posted November 14, 2016 Share Posted November 14, 2016 Hello, i would like to monitor the sensors on my board in unRAID. Unfortunately it needs a kernel module ... could you add it to future releases? 3.2.3. Teutates driver The Theseus chip uses the following kernel modules: • ftsteutates.ko The ftsteutaes driver is not yet (as of April 2016) part of the mainstream kernel. The sources for ftsteutates are available from Fujitsu via FTP (see Section 5.1, “Download adress for the ftsteutates driver”). If you have obtained the sources you need to build the kernel module using the standard procedure for external kernel modules. Doc: ftp://ftp.ts.fujitsu.com/pub/.../pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf Driver: ftp://ftp.ts.fujitsu.com/pub/.../pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/ftsteutates-module_20160601.zip or it there a how-to create my own kernel modules? i found one for older unRAID versions. Quote Link to comment
madejackson Posted November 8, 2018 Share Posted November 8, 2018 (edited) Did anyone have had success compiling the ftsteutates.ko driver for the sensors? I am in need of this as I own a Fujitsu board, but I am stuck in compiling errors. This is the error Code: Quote make[1]: Entering directory '/usr/src/linux-4.18.10-unRAID' make[1]: *** No rule to make target 'modules'. Stop. make[1]: Leaving directory '/usr/src/linux-4.18.10-unRAID' make: *** [Makefile:4: all] Error 2 Edited November 8, 2018 by madejackson Quote Link to comment
bonienl Posted November 8, 2018 Share Posted November 8, 2018 You can make a feature request to Limetech and ask them to include the driver. Quote Link to comment
limetech Posted November 8, 2018 Share Posted November 8, 2018 This driver requires "watchdog" support in kernel which we don't have enabled. Quote Link to comment
madejackson Posted November 9, 2018 Share Posted November 9, 2018 (edited) Thanks for your replies... That's a pitty. I thought this is somehow possible. Would be awesome, if you manage to include the driver for my sensor-Chip sometime into unraid (ftsteuates.ko). Without that, I am not able to read any temps or fan-speeds off of my MB. Also I'd like to control my fans, which I am not able to do without this driver. Only the CPU-temp is working. Although, it is no high priority issue. Edited November 9, 2018 by madejackson Quote Link to comment
DeBaschdi Posted December 13, 2019 Share Posted December 13, 2019 Hi , i Bought an Fujitsu d3644-b Board +1 for Kernel Driver Quote Link to comment
T0a Posted January 18, 2020 Share Posted January 18, 2020 Hi, I also own a Fujitsu d3644-b board and found this thread while searching for fan control with unRaid. I bought two NF-A12x25 fans (4 pin pwm) as I wanted to move my unRaid build from the hall to my living room. Unfortunately, the mainboard bios fan control has no silent mode (full, auto and enhanced). Thus, I was trying to control the fans via unRaid - finding it lacking the driver support. There are a lot of people owning this mainboard, because it was highly recommended in c't and this NAS build guide. @limetech Could you please consider adding the driver to unRaid 6.9.0? Quote Link to comment
Juggernaut Posted February 14, 2020 Share Posted February 14, 2020 Just FYI, ftsteutates does NOT enable influencing fan control. It is ONLY providing reading temperatures and fan speeds. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.