Tim P. Posted February 20, 2010 Share Posted February 20, 2010 I have unRAID running on: Intel D101GGC (AA D35788-305) Firmware GC11010N.86A.0312.2006.0609.1700 1024M DDR400 (single) Pentium D 2.66 MHz Lite-On CDRW Transcend SDHC 4GB in a SanDisk USB<>SDHC adapter (3) WD10EARS off of the onboard SATA. Bios Settings: Advanced>Floppy Configuration Onboard Floppy Drive Controller: Enabled Drive A: None Advanced>USB Configuration USB Controller: Enabled USB EHCI Controler: Enabled Legacy USB SUpport: Auto USB Zip Emulation Type: HDD Boot Silent Boot: Disabled Intel® Rapid Bios Boot: Disabled USB Boot: Enabled First Boot Device: Hard Disk Second Boot Device: Disabled Third Boot Device: Disabled Fourth Boot Device: Disabled Halt On: All, But KB Boot>Hard Disk Boot Priority 1. USB - HDD0 I'm not sure you need all of these configured like I have them, but I can confirm that this setup works. Hard disk boot priority doesn't seem to matter (I had USB listed as the last one and it still booted, but imagine it boots faster with USB as the first). HTH, Tim Quote Link to comment
Rajahal Posted February 23, 2010 Share Posted February 23, 2010 Just curious, but why the CD drive? Quote Link to comment
Tim P. Posted February 25, 2010 Author Share Posted February 25, 2010 Just curious, but why the CD drive? No reason, it was with the computer originally. Tim Quote Link to comment
Rajahal Posted February 25, 2010 Share Posted February 25, 2010 You should at least unplug it so that it isn't wasting power. unRAID doesn't need it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.