I am on another thread where after 4-5 parity checks with correction the server finally decided that it corrected parity.  I don't want to combine the two issues if it isn't really the same thing but on a basic level they seem to be.  Webgui reports errors which should have been corrected?

 

I ran it again and it said there were 2 synch errors.  I ran it again and the pushbullet update says the errors were corrected but the final report and webgui still state 2 synch errors.  Are these two new synch errors or is the report on the webgui just faulty?

 

See the 11:28 entry reports two but the 00:20 entry says two were fixed.  This is from archived notifications.

 

08-12-2016 11:28	unRAID Parity check	Notice [TOWERTEST] - Parity check finished (2 errors)	Duration: 17 hours, 58 minutes, 45 seconds. Average speed: 123.6 MB/s	warning	
08-12-2016 00:20	unRAID Status	Notice [TOWERTEST] - array health report [PASS]	Array has 7 disks (including parity & cache)	normal	
Parity - WDC_WD80EFZX-68UW8N0_VLG09Y0Y (sdf) - active 36 C [OK]
Parity2 - WDC_WD80EFZX-68UW8N0_VKKTZG6Y (sdb) - active 35 C [OK]
Disk 1 - HGST_HDN724040ALE640_PK2334PCKJT1JB (sdg) - active 38 C [OK]
Disk 2 - HGST_HDN724040ALE640_PK2334PCKH8JJB (sdh) - active 38 C [OK]
Disk 3 - WDC_WD80EFZX-68UW8N0_VKJ9E38X (sde) - active 32 C [OK]
Disk 4 - WDC_WD80EFZX-68UW8N0_VK0BB1NY (sdc) - active 31 C [OK]
Cache - MKNSSDRE1TB_MK160906100224D46 (sdd) - active 28 C [OK]

Parity check in progress.
Total size: 8 TB
Elapsed time: 6 hours, 51 minutes
Current position: 3.40 TB (42.5 %)
Estimated speed: 106.1 MB/sec
Estimated finish: 12 hours, 3 minutes
Sync errors corrected: 2

Post diagnostics and a link to your other thread.