December 16, 20169 yr My power supply died and as I don' t have a UPS this resulted in an unclean shutdown. After replacing the power supply I booted back up fine but when I try to bring the array online the whole webgui freezes, I just get: Spinning up all drives...Start array...Mounting disks... then nada, it freezes. I can still remotely log in after the webgui has frozen and see that the disks are online (and see contents of individual disks) but can't see the contents of the shares. The log file was apparently too big to put in this post (2000 char limit?) so I put it in pastebin Any help would really be appreciated.
December 16, 20169 yr Syslog you posted is not complete, attach it (or better yet the complete diagnostics)to a post.
December 16, 20169 yr Author Thanks for the quick response. Attached is what I think is the whole thing? bigtower-diagnostics-20161216-1220.zip
December 16, 20169 yr We need a syslog after array start, it you can't get it with the webGUI SSH into your server and grab the syslog.
December 16, 20169 yr Author Well it seems that 5 try was a charm, that is, the array mounted, albiet with more RED in the log than before. And it is telling me that there is an "unmountable disk present" but in the list of array devices (under Main) and under Array status (in Dashboard) there doesn't seem to be errors listed in the table... So since its not "perfect" I am still posting/attaching my log file. bigtower-syslog-20161216-1320.zip
December 16, 20169 yr You need to repair the filesystem on disk8 (md8) https://lime-technology.com/wiki/index.php/Check_Disk_Filesystems#Drives_formatted_with_XFS
Archived
This topic is now archived and is closed to further replies.