All, my apologies if i am not using this forum in the correct way.  Any guidance will be accepted as constructive criticism.  I have a brand new build (hardware and unRAID see below).  I'm having multiple issues that I am chasing my tail on.  I don't know if they are related or if I am chasing multiple problems.  HELP.  Here is what I can determine is going on.

 

1.  pcieport error crashing unRAID

 

Dec 23 12:41:44 Guardian kernel: ACPI: Early table checksum verification disabled

Dec 23 12:41:44 Guardian kernel: pci 0000:03:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit]

Dec 23 12:41:44 Guardian kernel: pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit]

Dec 23 12:41:44 Guardian kernel: pcieport 0000:00:02.2: AER: Corrected error received: id=0012

Dec 23 12:41:44 Guardian kernel: pcieport 0000:00:02.2: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0012(Receiver ID)

Dec 23 12:41:44 Guardian kernel: pcieport 0000:00:02.2:  device [8086:6f06] error status/mask=00000001/00002000

Dec 23 12:41:44 Guardian kernel: pcieport 0000:00:02.2:    [ 0] Receiver Error       

Dec 23 12:41:49 Guardian rpc.statd[2630]: Version 1.3.3 starting

Dec 23 12:41:49 Guardian sm-notify[2631]: Version 1.3.3 starting

Dec 23 12:41:49 Guardian rpc.statd[2630]: Failed to read /var/lib/nfs/state: Success

Dec 23 12:41:49 Guardian rpc.statd[2630]: Initializing NSM state

Dec 23 12:41:49 Guardian sshd[2649]: Server listening on 0.0.0.0 port 22.

Dec 23 12:41:50 Guardian avahi-daemon[3368]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!

Dec 23 12:46:24 Guardian kernel: mce: [Hardware Error]: Machine check events logged

   

2. whenever i try to stream a 4K movie it starts and then crashes unRAID

 

3. whenever I try to optimize a 4k movie (PLEX) crashes unRAID

 

As you can see by my configuration I spent a lot of $ to build this ultimate media server.  Any help would be greatly appreciated.  If i need to hire or donate happy to do so.

 

guardian-syslog-20161223-1500.zip

Forgot to include in original.

 

i7-6950X

128GB DDR4

16 6GB hot swappable drives

LSI SAS 9211-8i HBA

Super Micro Motherboard dual GigE ports

512GM SD in M2 slot

Loaded and running unRAID V6.2.4

PLEX for Amazon Fire TV 4k clients

PLEX Version 2.12.5

 

 

Syslog is useful, but what we like to see is the full diagnostics, there's a lot more info for us.  Please see Need help? Read me first!, and attach the diagnostics zip.

 

Check for a motherboard BIOS update, and firmware updates for any cards.  That may help with some of the firmware bugs reported, and the MCE.

 

A 'Hardware Error' (Machine Check Event) was reported.  MCE's are notoriously difficult to diagnose, so install the NerdPack, and within it, install the mcelog package.  It will monitor for MCE's and log quite a bit more info when one occurs, should help determine what is causing it.  We'd like to see the diagnostics *after* an MCE.

 

I would also do a LONG memory test, like overnight.  There's a Memtest on the unRAID boot menu, but with your newer equipment, it would probably be better to run the updated Memtest that PassMark has created.  It's a bit more trouble, as you have to first create bootable media, but it will more thoroughly test your RAM.  The built in Memtest is better than nothing though.

 

Your PixArt USB Optical Mouse is causing trouble, probably not serious but is clogging up the syslog as it disconnects and reconnects, over and over and over...

Not sure if this helps.  I did find someone to help me setup NERD as you requested. I tried to setup and not sure if I captured anything.  We did capture the following. 

Watson_Crash_2.txt