linuxserver.io Posted January 3, 2017 Share Posted January 3, 2017 (edited) Application Name: Domoticz Application Site: https://www.domoticz.com Docker Hub: https://hub.docker.com/r/linuxserver/domoticz/ Github: https://github.com/linuxserver/docker-domoticz Please post any questions/issues relating to this docker you have in this thread. If you are not using Unraid (and you should be!) then please do not post here, instead head to linuxserver.io to see how to get support. Edited September 14, 2018 by linuxserver.io 1 Quote Link to comment
sparklyballs Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Quote Link to comment
Squid Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Guess that I can't delete that feature of CA now... Hopefully other authors will see the options it brings up and take advantage to make things easier for new users. Quote Link to comment
binhex Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Guess that I can't delete that feature of CA now... Hopefully other authors will see the options it brings up and take advantage to make things easier for new users. Is there documentation on how to implement this in a template squid? Sent from my SM-G900F using Tapatalk Quote Link to comment
Squid Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Guess that I can't delete that feature of CA now... Hopefully other authors will see the options it brings up and take advantage to make things easier for new users. Is there documentation on how to implement this in a template squid? Sent from my SM-G900F using Tapatalk Programming forum docker xml thread. Sent from my LG-D852 using Tapatalk Quote Link to comment
binhex Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Guess that I can't delete that feature of CA now... Hopefully other authors will see the options it brings up and take advantage to make things easier for new users. Is there documentation on how to implement this in a template squid? Sent from my SM-G900F using Tapatalk Programming forum docker xml thread. Sent from my LG-D852 using Tapatalk Ta, I will take a look Sent from my SM-G900F using Tapatalk Quote Link to comment
Squid Posted February 16, 2017 Share Posted February 16, 2017 Tags available for latest and stable. Guess that I can't delete that feature of CA now... Hopefully other authors will see the options it brings up and take advantage to make things easier for new users. Is there documentation on how to implement this in a template squid? Sent from my SM-G900F using Tapatalk Programming forum docker xml thread. Sent from my LG-D852 using Tapatalk Ta, I will take a look Sent from my SM-G900F using Tapatalk Do it on a test container so you see how CA reacts Sent from my LG-D852 using Tapatalk Quote Link to comment
Exitialis Posted June 20, 2017 Share Posted June 20, 2017 Is it possible to pass multiple USB devices through to Domoticz? I have my Z-Wave stick working but I would like my 433.92mhz transceiver as well if possible. Quote Link to comment
Tunbridge Posted July 31, 2017 Share Posted July 31, 2017 Hey guys, The Domoticz UI is telling me that there's an update available for the software. If you click it you can see that it tries to download it but fails. Is updating within the app supported or is this something you do as an update to the container? Cheers Quote Link to comment
Wob76 Posted August 7, 2017 Share Posted August 7, 2017 Hi, I am playing around with Domoticz, with some success. I wanted to play around with the floorplan, it doesn't let you upload a image via the web interface, and the location it looks at is www/images/floorplans. So I can only access it from inside the dockers, and it won't survive a update. So, could this path be mapped to inside the config folder? Thanks, Wob Quote Link to comment
saarg Posted August 7, 2017 Share Posted August 7, 2017 30 minutes ago, Wob76 said: Hi, I am playing around with Domoticz, with some success. I wanted to play around with the floorplan, it doesn't let you upload a image via the web interface, and the location it looks at is www/images/floorplans. So I can only access it from inside the dockers, and it won't survive a update. So, could this path be mapped to inside the config folder? Thanks, Wob I never tried the floor plan, but I'll check it when I have some time. 1 Quote Link to comment
air_marshall Posted August 8, 2017 Share Posted August 8, 2017 I run this docker with the latest tag, I have OpenZwave through an passthrough usb Aeon stick all working well with some fibaro dimmers etc. In the process of adding Xiaomi Smart Home devices for triggers etc. I'm currently running 3.8206. I can add the Xiaomi Gateway but I don't get any devices listed. Log states: CODE: SELECT ALL 2017-08-08 21:11:28.994 XiaomiGateway: will listen on 9898 for hardware id 6 2017-08-08 21:11:28.994 XiaomiGateway: Delaying worker startup... 2017-08-08 21:11:33.995 XiaomiGateway: Worker started... I've configured the Uservariable to log directly as per the domoticz xiaomi gateway wiki. I've mapped port 9898 through to the docker (or at least I think I have):No errors shown but no devices found either.Server is on the same subnet as the gateway, server is wired and can only be wired. I ran the iptables commands from the wiki on the unraid server but it doesn't seem to have made a difference.I fired up domoticz on my windows desktop as a test bed, network situation is the same, the windows install picks up the devices right away.I suspect it's to do with the port but am at a loss of how to troubleshoot and fix it. Apparently: Quote You need to ensure the system Domoticz is running on can receive UDP Multicast packets. On Linux, this can be done with iptables -P OUTPUT ACCEPT iptables -I INPUT -p udp -j ACCEPT Can you help? Quote Link to comment
saarg Posted August 9, 2017 Share Posted August 9, 2017 Multicast isn't passed through to the container from unraid, so not much you can do. If you run unraid 6.4 rc you could try to give domoticz it's own IP, but not sure if multicast works then either. Quote Link to comment
air_marshall Posted August 9, 2017 Share Posted August 9, 2017 Ok I'll wait for that feature to become stable before I try the dedicated IP, but I like the idea. For now, running the docker "--net=host" rather than as a bridge has done the trick. Not sure what the downsides are of doing that but it works well and doesn't seem to have affected any other services/dockers... Quote Link to comment
saarg Posted August 9, 2017 Share Posted August 9, 2017 I completely forgot you can run it in host. Sorry about that. I do it with tvheadend and multicast IPTV, so I should have remembered The problem with running it in host mode is that you can't set the ports yourself. You need to have the default ports free. Hopefully you don't have any other containers running in host mode that uses the same port. Quote Link to comment
air_marshall Posted August 9, 2017 Share Posted August 9, 2017 I don't so it's worked fine. I did have a look for a "config" file of some sort to tweak the ports al la sabnzbd etc but couldn't find one for domoticz. Need to get my teeth into events, blocky and scripting now. Great use of a box that's already on 24/7 using it for home automation. Props for the docker! Quote Link to comment
Wob76 Posted August 15, 2017 Share Posted August 15, 2017 (edited) Hi, I am wanting to use this with the certs from my linuxserver.io letsencrypt container. I found the following details. http://www.domoticz.com/wiki/Native_secure_access_with_Lets_Encrypt Now I have followed the guide to cat the two .pem files from the letsencrypt container, the file /etc/ssl/certs/dhparam.pem doesn't exist (inside this container) so I just copied the DH Parameters from the existing server_cert.pem file. This all worked, but it obviously will not auto renew, just wondering if anyone has a process for keeping the cert valid? Thanks, Wob Edited August 15, 2017 by Wob76 Quote Link to comment
Wob76 Posted August 22, 2017 Share Posted August 22, 2017 OK, I am thinking of running the through a reverse proxy to avoid the certificate issue I mention above, but it doesn't seem to like URL rewrites, is it possible to parse commands to the startup command, adding -webroot domoticz should enable me to run it on something other than root. Or is does anyone already have a working revproxy config with URL rewrite for nginx? Thanks, Wob Quote Link to comment
saarg Posted August 22, 2017 Share Posted August 22, 2017 1 hour ago, Wob76 said: OK, I am thinking of running the through a reverse proxy to avoid the certificate issue I mention above, but it doesn't seem to like URL rewrites, is it possible to parse commands to the startup command, adding -webroot domoticz should enable me to run it on something other than root. Or is does anyone already have a working revproxy config with URL rewrite for nginx? Thanks, Wob I'll see if I can add the option when I have time. Not going to be this week though. Quote Link to comment
Wob76 Posted August 22, 2017 Share Posted August 22, 2017 1 hour ago, saarg said: I'll see if I can add the option when I have time. Not going to be this week though. Thanks saarg, I'm not sure it is going to work though, I edited /etc/services.d/domoticz/run file to include the -webroot and it worked, but the page gets messed up. I'll fire up a fresh docker and try it, to make sure it is not something else I have changed, I'll report back. Quote Link to comment
saarg Posted August 22, 2017 Share Posted August 22, 2017 Do a Google search for domoticz webroot and you'll find a page in their forum about the issue and how to solve it. Quote Link to comment
Wob76 Posted August 23, 2017 Share Posted August 23, 2017 Hi saarg, I updated the docker, and I am running the latest beta, it is working with webroot now, with the exception of one vital part, I can't use the "Apply Settings" button, browser logs show a 400 error. I have posted on the domoticz forum so hopefully and easy fix. Regardless of the issue in domoticz it would be nice to include a way to pass a webroot option via the docker. Still hoping for a redirect of the floorplan folder into /config, at the moment I have to jump in and copy my file from /config into the folder under www/images/floorplans. No rush on either fix, and thanks for your work. Wob Quote Link to comment
Wob76 Posted August 25, 2017 Share Posted August 25, 2017 Going to add another request At the moment the custom icon uploading doesn't work, there is permission issues with 2 folders /tmp and /var/lib/domoticz/www/images I did a chmod 777 to both and the upload starts to work. But even with it working, the new icons will not survive a docker update and the www/images folder is inside the container. Maybe moving the whole image folder into /config, that would fix the custom icons and floorplans. Thanks, Wob Quote Link to comment
air_marshall Posted October 1, 2017 Share Posted October 1, 2017 Can we get a tag for the latest stable? 3.8153 Currently using the 'latest' tag but experiencing some of the bleeding edge bugs which is ruining the WAF, but I need functionality that was added between the stable tag on the repo and the latest stable release. Quote Link to comment
saarg Posted October 1, 2017 Share Posted October 1, 2017 I'll see if I get the time to add it today. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.