dstanley Posted April 27, 2018 Share Posted April 27, 2018 I have added several addresses to WebGUIs and have them revert at odd times. /mylar and /headphones always seem to get removed from my templates. It is annoying and I tried several different ‘fixes’ which never worked. Likely this is the same issue. Quote Link to comment
Greygoose Posted May 8, 2018 Share Posted May 8, 2018 Need some help, Radarr will not rename and move to my movies folder I have the same settings as sonarr which would fine. Quote Link to comment
mcjfauser Posted June 9, 2018 Share Posted June 9, 2018 Hi, My Radarr is not labeling torrents sent to Deluge. Although they end up downloading, they are never sorted, and its as if Radarr does not know they exist, despite the fact it is fetched by Radarr. My Sonarr was doing this with Deluge too at one stage but magically came good. Log: Couldn't add report to download queue. Wind.River.2017.1080p.BluRay.H264.AAC-RARBG: Unable to connect to Deluge, please check your settings NzbDrone.Core.Download.Clients.DownloadClientException: Unable to connect to Deluge, please check your settings ---> System.Net.WebException: The request timed out at System.Net.HttpWebRequest.EndGetResponse (System.IAsyncResult asyncResult) [0x00059] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1033 at System.Net.HttpWebRequest.GetResponse () [0x0000e] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1045 at NzbDrone.Common.Http.Dispatchers.ManagedHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x0012b] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\ManagedHttpDispatcher.cs:74 at NzbDrone.Common.Http.Dispatchers.FallbackHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x000cc] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\FallbackHttpDispatcher.cs:58 at NzbDrone.Common.Http.HttpClient.ExecuteRequest (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookieContainer) [0x0007e] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:114 at NzbDrone.Common.Http.HttpClient.Execute (NzbDrone.Common.Http.HttpRequest request) [0x00008] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:50 at NzbDrone.Core.Download.Clients.Deluge.DelugeProxy.ExecuteRequest[TResult] (NzbDrone.Common.Http.JsonRpcRequestBuilder requestBuilder, System.String method, System.Object[] arguments) [0x0000e] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Deluge\DelugeProxy.cs:213 --- End of inner exception stack trace --- at NzbDrone.Core.Download.Clients.Deluge.DelugeProxy.ExecuteRequest[TResult] (NzbDrone.Common.Http.JsonRpcRequestBuilder requestBuilder, System.String method, System.Object[] arguments) [0x0006f] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Deluge\DelugeProxy.cs:234 at NzbDrone.Core.Download.Clients.Deluge.DelugeProxy.ProcessRequest[TResult] (NzbDrone.Core.Download.Clients.Deluge.DelugeSettings settings, System.String method, System.Object[] arguments) [0x00008] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Deluge\DelugeProxy.cs:180 at NzbDrone.Core.Download.Clients.Deluge.DelugeProxy.SetLabel (System.String hash, System.String label, NzbDrone.Core.Download.Clients.Deluge.DelugeSettings settings) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Deluge\DelugeProxy.cs:158 at NzbDrone.Core.Download.Clients.Deluge.Deluge.AddFromMagnetLink (NzbDrone.Core.Parser.Model.RemoteMovie remoteMovie, System.String hash, System.String magnetLink) [0x00025] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Deluge\Deluge.cs:42 at NzbDrone.Core.Download.TorrentClientBase`1[TSettings].DownloadFromMagnetUrl (NzbDrone.Core.Parser.Model.RemoteMovie remoteMovie, System.String magnetUrl) [0x00048] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\TorrentClientBase.cs:214 at NzbDrone.Core.Download.TorrentClientBase`1[TSettings].Download (NzbDrone.Core.Parser.Model.RemoteMovie remoteMovie) [0x000f1] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\TorrentClientBase.cs:103 at NzbDrone.Core.Download.DownloadService.DownloadReport (NzbDrone.Core.Parser.Model.RemoteMovie remoteMovie, System.Boolean foceDownload) [0x000a3] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\DownloadService.cs:64 at NzbDrone.Core.Download.ProcessDownloadDecisions.ProcessDecisions (System.Collections.Generic.List`1[T] decisions) [0x00183] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\ProcessDownloadDecisions.cs:88 Quote Link to comment
becksworth Posted June 17, 2018 Share Posted June 17, 2018 Radarr starting giving me some problems since the new update and also the new nzbget update. This is what is showing on my log below. I am getting the same error in sonarr as well. It will send the movie to nzbget and will show up in the history as "copy" and then show as instantly downloaded in radarr but nothing happens after that. The file never shows up in the download section of nzbget. Any ideas? I looked at all my settings and nothing has been changed since the update. NzbDrone.Core.Download.Clients.DownloadClientException: Unable to connect to NZBGet. Error getting response stream (ReadDone2): ReceiveFailure ---> System.Net.WebException: Error getting response stream (ReadDone2): ReceiveFailure ---> System.Exception: at System.Net.WebConnection.HandleError (System.Net.WebExceptionStatus st, System.Exception e, System.String where) [0x00031] in <5efeee63065d4efdba33446b88d50914>:0 at System.Net.WebConnection.ReadDone (System.IAsyncResult result) [0x00056] in <5efeee63065d4efdba33446b88d50914>:0 at System.Net.Sockets.SocketAsyncResult+<>c.<Complete>b__27_0 (System.Object state) [0x00000] in <5efeee63065d4efdba33446b88d50914>:0 at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem () [0x00015] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Threading.ThreadPoolWorkQueue.Dispatch () [0x00074] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback () [0x00000] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Net.WebConnection.HandleError (System.Net.WebExceptionStatus st, System.Exception e, System.String where) [0x00031] in /build/mono/src/mono/mcs/class/System/System.Net/WebConnection.cs:439 --- End of inner exception stack trace --- at System.Net.HttpWebRequest.EndGetResponse (System.IAsyncResult asyncResult) [0x00059] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1033 at System.Net.HttpWebRequest.GetResponse () [0x0000e] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1045 at NzbDrone.Common.Http.Dispatchers.ManagedHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x0012b] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\ManagedHttpDispatcher.cs:74 at NzbDrone.Common.Http.Dispatchers.FallbackHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x000cc] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\FallbackHttpDispatcher.cs:58 at NzbDrone.Common.Http.HttpClient.ExecuteRequest (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookieContainer) [0x0007e] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:114 at NzbDrone.Common.Http.HttpClient.Execute (NzbDrone.Common.Http.HttpRequest request) [0x00008] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:50 at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.ProcessRequest[T] (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings, System.String method, System.Object[] parameters) [0x00047] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:232 --- End of inner exception stack trace --- at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.ProcessRequest[T] (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings, System.String method, System.Object[] parameters) [0x0008e] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:245 at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.GetHistory (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:135 at NzbDrone.Core.Download.Clients.Nzbget.Nzbget.GetHistory () [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\Nzbget.cs:128 Quote Link to comment
JDunn82 Posted June 18, 2018 Share Posted June 18, 2018 On 4/23/2018 at 6:11 PM, schilling3003 said: I recently began getting the error below when searching to add new movies, no matter what I am searching for. There Was An Error Searching For 'Star'. If the movie title contains non-alphanumeric characters try removing them, otherwise try your search again later. "Star" was just an example. I get the same error no matter what I try to search for. I have not made any changes to my setup, everything worked fine until the past day or so. Any suggestions? did you get this fixed? I am having same issue now. Quote Link to comment
salora Posted June 22, 2018 Share Posted June 22, 2018 hi binhex, I've this error with radarr "container_linux.go:265: starting container process caused "exec: \"/usr/bin/tini\": stat /usr/bin/tini: no such file or directory" can you please assist me to fix? regards Quote Link to comment
witalit Posted June 22, 2018 Share Posted June 22, 2018 On 6/17/2018 at 5:42 AM, becksworth said: Radarr starting giving me some problems since the new update and also the new nzbget update. This is what is showing on my log below. I am getting the same error in sonarr as well. It will send the movie to nzbget and will show up in the history as "copy" and then show as instantly downloaded in radarr but nothing happens after that. The file never shows up in the download section of nzbget. Any ideas? I looked at all my settings and nothing has been changed since the update. NzbDrone.Core.Download.Clients.DownloadClientException: Unable to connect to NZBGet. Error getting response stream (ReadDone2): ReceiveFailure ---> System.Net.WebException: Error getting response stream (ReadDone2): ReceiveFailure ---> System.Exception: at System.Net.WebConnection.HandleError (System.Net.WebExceptionStatus st, System.Exception e, System.String where) [0x00031] in <5efeee63065d4efdba33446b88d50914>:0 at System.Net.WebConnection.ReadDone (System.IAsyncResult result) [0x00056] in <5efeee63065d4efdba33446b88d50914>:0 at System.Net.Sockets.SocketAsyncResult+<>c.<Complete>b__27_0 (System.Object state) [0x00000] in <5efeee63065d4efdba33446b88d50914>:0 at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem () [0x00015] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Threading.ThreadPoolWorkQueue.Dispatch () [0x00074] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback () [0x00000] in <2dfe84a36ef4410ca18642993b51b799>:0 at System.Net.WebConnection.HandleError (System.Net.WebExceptionStatus st, System.Exception e, System.String where) [0x00031] in /build/mono/src/mono/mcs/class/System/System.Net/WebConnection.cs:439 --- End of inner exception stack trace --- at System.Net.HttpWebRequest.EndGetResponse (System.IAsyncResult asyncResult) [0x00059] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1033 at System.Net.HttpWebRequest.GetResponse () [0x0000e] in /build/mono/src/mono/mcs/class/System/System.Net/HttpWebRequest.cs:1045 at NzbDrone.Common.Http.Dispatchers.ManagedHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x0012b] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\ManagedHttpDispatcher.cs:74 at NzbDrone.Common.Http.Dispatchers.FallbackHttpDispatcher.GetResponse (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookies) [0x000cc] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\Dispatchers\FallbackHttpDispatcher.cs:58 at NzbDrone.Common.Http.HttpClient.ExecuteRequest (NzbDrone.Common.Http.HttpRequest request, System.Net.CookieContainer cookieContainer) [0x0007e] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:114 at NzbDrone.Common.Http.HttpClient.Execute (NzbDrone.Common.Http.HttpRequest request) [0x00008] in C:\projects\radarr-usby1\src\NzbDrone.Common\Http\HttpClient.cs:50 at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.ProcessRequest[T] (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings, System.String method, System.Object[] parameters) [0x00047] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:232 --- End of inner exception stack trace --- at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.ProcessRequest[T] (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings, System.String method, System.Object[] parameters) [0x0008e] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:245 at NzbDrone.Core.Download.Clients.Nzbget.NzbgetProxy.GetHistory (NzbDrone.Core.Download.Clients.Nzbget.NzbgetSettings settings) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\NzbgetProxy.cs:135 at NzbDrone.Core.Download.Clients.Nzbget.Nzbget.GetHistory () [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Download\Clients\Nzbget\Nzbget.cs:128 What happens when you test the connection from Radarr to NZBGet? I had the same issue 'Error getting response from stream.' Restarting the docker fixed it for me though.. Quote Link to comment
salora Posted June 23, 2018 Share Posted June 23, 2018 (edited) On 6/22/2018 at 6:48 PM, salora said: hi binhex, I've this error with radarr "container_linux.go:265: starting container process caused "exec: \"/usr/bin/tini\": stat /usr/bin/tini: no such file or directory" can you please assist me to fix? regards I tried to start from scratch a new container and got the same error, is there an update or maybe a rollback so I don't get the latest release which cause trouble? the only way I found was to setup a regular linux/server radarr container and copy/paste the content of the binhex appdata folder thank u regards Edited June 23, 2018 by salora Quote Link to comment
mtrivs Posted June 24, 2018 Share Posted June 24, 2018 (edited) On 4/23/2018 at 6:11 PM, schilling3003 said: I recently began getting the error below when searching to add new movies, no matter what I am searching for. There Was An Error Searching For 'Star'. If the movie title contains non-alphanumeric characters try removing them, otherwise try your search again later. "Star" was just an example. I get the same error no matter what I try to search for. I have not made any changes to my setup, everything worked fine until the past day or so. Any suggestions? On 6/18/2018 at 8:41 AM, JDunn82 said: did you get this fixed? I am having same issue now. Same issue for me as well. Just started with the most recent update. UPDATE: 13 hours later and the issue has resolved itself......Aliens? Edited June 24, 2018 by mtrivs Quote Link to comment
binhex Posted June 25, 2018 Author Share Posted June 25, 2018 On 6/24/2018 at 3:51 AM, mtrivs said: Same issue for me as well. Just started with the most recent update. UPDATE: 13 hours later and the issue has resolved itself......Aliens? could be aliens or even worse, your isp, certainly wasn't me (last release 14 days ago) ? Quote Link to comment
salora Posted June 25, 2018 Share Posted June 25, 2018 On 6/23/2018 at 6:47 PM, salora said: I tried to start from scratch a new container and got the same error, is there an update or maybe a rollback so I don't get the latest release which cause trouble? the only way I found was to setup a regular linux/server radarr container and copy/paste the content of the binhex appdata folder thank u regards Well now it's binhex-sonarr that gives me the same error "container_linux.go:265: starting container process caused "exec: \"/usr/bin/tini\": stat /usr/bin/tini: no such file or directory" working well with sonarr linuxserver container though, so I really don't understand what's going on here Quote Link to comment
binhex Posted June 25, 2018 Author Share Posted June 25, 2018 14 minutes ago, salora said: Well now it's binhex-sonarr that gives me the same error "container_linux.go:265: starting container process caused "exec: \"/usr/bin/tini\": stat /usr/bin/tini: no such file or directory" my guess would be that you are mapping host path /usr to the container and thus overwriting whats in the container causing it to fail to start, what volume mappings do you have configured for this container?. Quote Link to comment
salora Posted June 25, 2018 Share Posted June 25, 2018 2 hours ago, binhex said: my guess would be that you are mapping host path /usr to the container and thus overwriting whats in the container causing it to fail to start, what volume mappings do you have configured for this container?. I don't think so, the settings did not change since I started the unraid server 4 month ago, and it goes wrong after the last containers update the settings are attached regards Quote Link to comment
binhex Posted June 25, 2018 Author Share Posted June 25, 2018 (edited) what is your volume mapping for /config? you may need to click on show more settings and/or enable "advanced view" to see it. edit - just to confirm i pulled down the latest docker image, created container and started it, and i can access the web ui, so there are no issues with the current docker image. Edited June 25, 2018 by binhex Quote Link to comment
salora Posted June 25, 2018 Share Posted June 25, 2018 (edited) 1 hour ago, binhex said: what is your volume mapping for /config? you may need to click on show more settings and/or enable "advanced view" to see it. edit - just to confirm i pulled down the latest docker image, created container and started it, and i can access the web ui, so there are no issues with the current docker image. hi binhex its : /config ->/mnt/user/appdata/binhex-radarr as it always has been because it's in the template I did not changed it the only thing that has changed is that I updated unraid to 6.5.3 thanks for your support regards Edited June 25, 2018 by salora Quote Link to comment
salora Posted June 25, 2018 Share Posted June 25, 2018 I have this when I try to pull the docker image from scratch Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-radarr' --net='bridge' -e TZ="Europe/Paris" -e HOST_OS="unRAID" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '7878:7878/tcp' -v '/mnt/disks/Transcend/home/DL/':'/data':'rw,slave' -v '/mnt/user/media/films/':'/media':'rw' -v '/mnt/user/appdata/binhex-radarr':'/config':'rw' 'binhex/arch-radarr' c6a03b3b37833dfb7723288e1abf1a5a3dd2a660ff0ed6448133033310531f83 /usr/bin/docker: Error response from daemon: oci runtime error: container_linux.go:265: starting container process caused "exec: "/usr/bin/tini": stat /usr/bin/tini: no such file or directory".The command failed. Quote Link to comment
binhex Posted June 26, 2018 Author Share Posted June 26, 2018 (edited) 16 hours ago, salora said: I have this when I try to pull the docker image from scratch Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-radarr' --net='bridge' -e TZ="Europe/Paris" -e HOST_OS="unRAID" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '7878:7878/tcp' -v '/mnt/disks/Transcend/home/DL/':'/data':'rw,slave' -v '/mnt/user/media/films/':'/media':'rw' -v '/mnt/user/appdata/binhex-radarr':'/config':'rw' 'binhex/arch-radarr' c6a03b3b37833dfb7723288e1abf1a5a3dd2a660ff0ed6448133033310531f83 /usr/bin/docker: Error response from daemon: oci runtime error: container_linux.go:265: starting container process caused "exec: "/usr/bin/tini": stat /usr/bin/tini: no such file or directory".The command failed. i can only assume from this that you either:- 1. have a corrupt docker image - remove the docker image (leave the container, then re-pull the docker image down again) or 2. you have a corrupt docker loopback image - stop docker (unraid web ui/plugins/docker) and then remove the docker img file and re-create it - this will of course mean you will loose all containers and images, but you can easily restore these using either CA or clicking and select the 'my' templates from the list when clicking on 'Add container'. if i run the above command with paths modified only on my local machine i get a successful start:- docker run -d --name='binhex-radarr' --net='bridge' -e TZ="Europe/Paris" -e HOST_OS="unRAID" -e 'UMASK'='000' -e 'PUID'='0' -e 'PGID'='0' -p '7878:7878/tcp' -v '/tmp/':'/data':'rw' -v '/tmp/':'/media':'rw' -v '/tmp':'/config':'rw' 'binhex/arch-radarr' 3d5ef2e639ea7ed77f0cddd84dde7f0f14c23292cf3cb5bbe055183bbb7c062a docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 3d5ef2e639ea binhex/arch-radarr "/usr/bin/tini -- /b…" 20 seconds ago Up 18 seconds 0.0.0.0:7878->7878/tcp binhex-radarr one thing to note, i noticed you have a very non standard option on one of your volume mappings, namely the 'slave' option, snippet:- /mnt/disks/Transcend/home/DL/':'/data':'rw,slave' im guessing you are using unassigned devices plugin and somewhere along the line you were told to use this option?, just try removing ',slave' and try to create the container again. Edited June 26, 2018 by binhex Quote Link to comment
salora Posted June 26, 2018 Share Posted June 26, 2018 4 hours ago, binhex said: i can only assume from this that you either:- 1. have a corrupt docker image - remove the docker image (leave the container, then re-pull the docker image down again) or 2. you have a corrupt docker loopback image - stop docker (unraid web ui/plugins/docker) and then remove the docker img file and re-create it - this will of course mean you will loose all containers and images, but you can easily restore these using either CA or clicking and select the 'my' templates from the list when clicking on 'Add container'. if i run the above command with paths modified only on my local machine i get a successful start:- docker run -d --name='binhex-radarr' --net='bridge' -e TZ="Europe/Paris" -e HOST_OS="unRAID" -e 'UMASK'='000' -e 'PUID'='0' -e 'PGID'='0' -p '7878:7878/tcp' -v '/tmp/':'/data':'rw' -v '/tmp/':'/media':'rw' -v '/tmp':'/config':'rw' 'binhex/arch-radarr' 3d5ef2e639ea7ed77f0cddd84dde7f0f14c23292cf3cb5bbe055183bbb7c062a docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 3d5ef2e639ea binhex/arch-radarr "/usr/bin/tini -- /b…" 20 seconds ago Up 18 seconds 0.0.0.0:7878->7878/tcp binhex-radarr one thing to note, i noticed you have a very non standard option on one of your volume mappings, namely the 'slave' option, snippet:- /mnt/disks/Transcend/home/DL/':'/data':'rw,slave' im guessing you are using unassigned devices plugin and somewhere along the line you were told to use this option?, just try removing ',slave' and try to create the container again. Hi binhex, I already tried removing the docker image, it did'nt do the trick :( So I tried option 2 remove everything and it's working :) So back to normal thanks a lot for your support best regards 1 Quote Link to comment
MDark Posted July 2, 2018 Share Posted July 2, 2018 (edited) For some reason, I cannot add sabnzbd to radarr as a download client. The test fails and it won't let me save the config. The weird thing is I went through and set this up just fine with sonarr. When I setup sabnzbd in sonarr it was all working perfectly: testing was successful, and downloads were being sent from sonarr to sab. The problems occurred when I went to add sab to radarr. The test has never succeeded and I am using the same settings. Also since I have gone back to check if I did something wrong sonarr now fails the test as well. I generated a new API key but that made no difference. Does anybody have any ideas about what this could be? Screenshot attached. Edited July 2, 2018 by MDark Quote Link to comment
tential Posted July 13, 2018 Share Posted July 13, 2018 When I use this docker I get runaway memory usage. Is this what you all are seeing? Want to report this issue, but want to make sure it's not just me. Quote Link to comment
munit85 Posted July 29, 2018 Share Posted July 29, 2018 On 7/12/2018 at 5:01 PM, tential said: When I use this docker I get runaway memory usage. Is this what you all are seeing? Want to report this issue, but want to make sure it's not just me. same here. Quote Link to comment
tential Posted August 6, 2018 Share Posted August 6, 2018 On 7/29/2018 at 4:13 PM, munit85 said: same here. I believe I'm not the only one, I know another user mentioned this docker, but it seems odd that only us 2 have mentioned it. Will have to wait til OP gets a chance to look. Maybe we should post on docker/github? Which is more appropriate? Never done that, not sure how it works. Quote Link to comment
binhex Posted August 7, 2018 Author Share Posted August 7, 2018 (edited) 12 hours ago, tential said: I believe I'm not the only one, I know another user mentioned this docker, but it seems odd that only us 2 have mentioned it. Will have to wait til OP gets a chance to look. Maybe we should post on docker/github? Which is more appropriate? Never done that, not sure how it works. i dont actually use radarr so i cant comment on memory issues, i am aware of issues relating to the later version of mono which this docker uses, however the known fix is in place to fix this, and i dont believe it was related to memory leaks in any case. If this is an ongoing issue then your best bet is to post this as an issue on the radarr github repository. edit - looks like a known issue (still not resolved):- https://github.com/Radarr/Radarr/issues/1580 Edited August 7, 2018 by binhex Quote Link to comment
mcdubjr Posted August 8, 2018 Share Posted August 8, 2018 I run two instances of Radarr to keep 4k movies in their own instance. I run the 4k instance on port 7979. It works well except that the WebUI link on the main docker page sends me to the 7878 server. I've updated the WebUI setting in the docker advanced settings to http://[IP]:[PORT:7979]/ but this docker ignores it. I tested changing this setting on some of my other dockers and it works. Running 6.5.3. Quote Link to comment
munit85 Posted August 10, 2018 Share Posted August 10, 2018 On 8/7/2018 at 2:11 AM, binhex said: edit - looks like a known issue (still not resolved):- https://github.com/Radarr/Radarr/issues/1580 thanks for the followup. I've just been restarting it every few days. looks like they'll sort it out in due time. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.