enigma27 Posted November 30, 2020 Share Posted November 30, 2020 (edited) @binhex Have you tested connecting to SABNzb using V3? I can connect using the HTTP port but trying to use the HTTPs port gives me the following error Test was aborted due to an error: Unable to connect to SABnzbd, An error occurred while sending the request. The response ended prematurely.: 'http://XXX.XXX.XXX.X:XXXX/api?mode=get_config&apikey=3XXXXXXXXXXXXXXXXXXXXXXXXXX&output=json' I have X'ed out my IP address and API key for obvious reasons. The exact same settings in Sonarr which is still on version 2 connect just fine. Edited November 30, 2020 by enigma27 Quote Link to comment
enigma27 Posted November 30, 2020 Share Posted November 30, 2020 just to add it seems using the https port number it says it cant connect to the server IP even though both Sonarr and Lidarr are working fine Quote Link to comment
binhex Posted November 30, 2020 Author Share Posted November 30, 2020 2 minutes ago, enigma27 said: just to add it seems using the https port number it says it cant connect to the server IP even though both Sonarr and Lidarr are working fine are you using a self signed cert for sabnzbd?, if so if its anything like sonarr v3 then you will need to allow this, i think its in general settings somewhere. Quote Link to comment
enigma27 Posted November 30, 2020 Share Posted November 30, 2020 ok I changed the option in the Radarr settings for "Certificate Validation" from enabled to disabled for local addresses and it seems to now connect 1 Quote Link to comment
SeattleBandit Posted November 30, 2020 Share Posted November 30, 2020 14 hours ago, wgstarks said: You can either go to the docker tab and check for updates then apply the update or you can just select force update for any docker. I believe you need to set the view to advanced to see this option. i totally missed the advanced check in the upper right of the docker tab - advanced gives me all the info i was wishing for - 🤦♂️ Quote Link to comment
cromwell Posted December 1, 2020 Share Posted December 1, 2020 Great new interface but this update was a wild ride! 9 hours ago, enigma27 said: ok I changed the option in the Radarr settings for "Certificate Validation" from enabled to disabled for local addresses and it seems to now connect This fixed it for me after force updating! Quote Link to comment
Skatman Posted December 1, 2020 Share Posted December 1, 2020 (edited) Forced update works for me. I've also been having a few issues with both Radarr and Sonarr not moving *some* of my downloaded files from the "complete" folder to my actual media folder. No idea what's causing this as neither are producing any logs. Hoping this update fixes it for Radarr. Also sent you $5 @binhex . Thanks for all that you do. Edited December 1, 2020 by Skatman 1 Quote Link to comment
GeekMajic Posted December 2, 2020 Share Posted December 2, 2020 I love the new update, but I can't find how to import from Lists. Quote Link to comment
dudeabides Posted December 2, 2020 Share Posted December 2, 2020 13 hours ago, Skatman said: I've also been having a few issues with both Radarr and Sonarr not moving *some* of my downloaded files from the "complete" folder to my actual media folder... I have been having the same issue with Radarr since the update. All my movies download to my download root folder instead of downloads/completed/movies This causes synching to miss the movies. I am going to try to restore to the previous version. Quote Link to comment
Lameth Posted December 2, 2020 Share Posted December 2, 2020 I've some issues with the Radarr and Sonarr. All connection to Jackett and DelugeVPN fails: The connections to Plex and Slack are working. Tried to downgrade Radarr back to the previous version, but when startiing it's stuck on the logon screen. Upgraded Sonarr to V3, same connection issues. Couldn't find any errors in the logs. Quote Link to comment
wgstarks Posted December 2, 2020 Share Posted December 2, 2020 23 minutes ago, Lameth said: I've some issues with the Radarr and Sonarr. Just a guess but check your privoxy is running on Deluge. I’m assuming you have Radarr Sonarr and Jackett proxy configured to connect to deluge. Quote Link to comment
Lameth Posted December 2, 2020 Share Posted December 2, 2020 6 minutes ago, wgstarks said: Just a guess but check your privoxy is running on Deluge. I’m assuming you have Radarr Sonarr and Jackett proxy configured to connect to deluge. Good point, I had problems with a previous version of DelugeVPN, could've forgotten to set the privoxy. Checked it, and Privoxy is enabled and configured in every container. Jackett can connect to the indexers without any issues through Deluge. Quote Link to comment
Lameth Posted December 2, 2020 Share Posted December 2, 2020 (edited) So, I've tried averything I could think of. There was a new Jackett version available, so I upgraded it. I installed a clean 0.2.0.1504-1-02 version, still couldn't connect to DelugeVPN or Jackett... Any ideas what I should try? Update: I've turned the proxy off, and now I can connect without any issues. I don't know why doesn't it work, it ahd no issues in the past, I'll check tomorrow. Edited December 2, 2020 by Lameth Quote Link to comment
Patriot_Unraider Posted December 3, 2020 Share Posted December 3, 2020 I updated and ran the newest v3 release and noticed Drone Factory was gone which I use despite warnings to not use. That is just how my setup is configured and it works. v3 this is gone which I knew was coming eventually. However I rolled back to v2 and cannot login to radarr anymore. Any suggestion on how to get it to login? Don't want to lose my configuration. Thanks Quote Link to comment
xxDeadbolt Posted December 4, 2020 Share Posted December 4, 2020 Since the bump up to v3, has anyone else been having issues when adding torrents where it just stays in your download client as 'meta'? Never happened until v3, I've checked with stuff that downloaded fine just before it changed & now it's just sitting there as meta. Previously, it'd show this briefly, then change to the torrent name and download. Strange. Quote Link to comment
Meleniumshane90 Posted December 5, 2020 Share Posted December 5, 2020 These last updates broke a whole bunch of stuff. The importer no longer works. I have over 300 pages of errors identical to this and a bunch of things stuck in limbo. For some reason, possibly related to this, it has downloaded three different copies of the same movie in no particular order. It's not replacing a lower quality copy with a higher quality copy, I think it doesn't see the file moved, so it tries another release. The thing that really sucks is the recycling bin enabled a default option to delete ALL files in that folder older than 7 days. I hadn't gone in and manually fixed the files sitting in that folder yet, so it wiped that entire directory. This should have been an opt-in instead of the default configuration, considering this is an in-place upgrade and not a new installation. Whereas this is how it handled it prior to the update (this is Sonarr, which fortunately hasn't been broken): Quote Link to comment
nekromantik Posted December 5, 2020 Share Posted December 5, 2020 how do you guys stop the MediaCovers dir in app config filling up with posters? as this is not mapped to a share it takes up space on my docker.img file this is on v3 Quote Link to comment
Jorgen Posted December 6, 2020 Share Posted December 6, 2020 6 hours ago, nekromantik said: how do you guys stop the MediaCovers dir in app config filling up with posters? as this is not mapped to a share it takes up space on my docker.img file this is on v3 My MediaCover directory is in appdata on my cache disk, not inside the docker.img. As far as I know I haven't done anything special to put it there, wasn't even aware of it until I saw your post. It should be inside /config from the container perspective, which should be mapped to your appdata share. Quote Link to comment
nekromantik Posted December 6, 2020 Share Posted December 6, 2020 8 hours ago, Jorgen said: My MediaCover directory is in appdata on my cache disk, not inside the docker.img. As far as I know I haven't done anything special to put it there, wasn't even aware of it until I saw your post. It should be inside /config from the container perspective, which should be mapped to your appdata share. oops your correct ignore me haha 1 Quote Link to comment
Cessquill Posted December 9, 2020 Share Posted December 9, 2020 Anybody else getting a fairly high CPU usage on Radarr? Not sure whether it's since the v3 upgrade, but on the docker tab I'm seeing it fluctuate between 12-25% constantly. If I go to Radarr's System, Tasks page, nothing's currently running. I'm not exactly running a fast system (Xeon E3-1231v3 @ 3.4Ghz), and it's constantly using the most out of all dockers. Just wondering whether it's normal. Quote Link to comment
vvolfpack Posted December 11, 2020 Share Posted December 11, 2020 On 12/1/2020 at 5:33 PM, GeekMajic said: I love the new update, but I can't find how to import from Lists. I'm also facing the same issue since migrating to 3. Lists imported via Trakt are getting monitored, but movies aren't auto-downloading. (I have to manually "Search All" missing movies to trigger a download. Quote Link to comment
Vega14 Posted December 13, 2020 Share Posted December 13, 2020 (edited) I have a strange issue after changing my root folder. About half of my movies are flagged as missing in Radarr, even though the paths should be correct. For example: a path of "/media/Ant-Man (2015)" does not detect anything in that folder, but changing it to "/media/Ant-Man (2015)/" does see the movie. I've tried changing the root folder again via the movie editor but it does not seem to add the trailing forward slash, and movies are still not detected. Is there an easy fix for this besides going through each undetected movie and changing the path manually? Thanks in advance! *EDIT* My issue appear to be case sensitive related. Please disregard. Edited December 14, 2020 by Vega14 update Quote Link to comment
brasiledo Posted December 18, 2020 Share Posted December 18, 2020 Having an issue when trying to connect custom script to trigger on import. Getting this message: ApplicationName='/tools/Radar_completion.sh', CommandLine='', CurrentDirectory='', Native error= Access denied I tried CHOWN on the folder permissions to 'nobody' but still the same issue. Are there specific credentials radarr is authenticating? Quote Link to comment
tallbill Posted December 18, 2020 Share Posted December 18, 2020 Having a hell of a time using two drives for nzbget and radarr and pulling my hair out. Nzbget is downloading to /mnt/disks/WD5001/ Media folder on my Unraid Array is /mnt/User/Plex In nzbget container, path to /downloads/ is /mnt/disks/WD5001/ In radarr container, paths to /downloads/ is /mnt/disks/WD5001/ and path to /movies is /mnt/user/Plex/downloads/movies/ I've tried MANY variations of these and nothing is working. I'm always missing a root folder or unable to see anything. Have already removed and deleted appdata. Makes zero sense to me at this point based everything I'm reading on here or watching on youtube. Quote Link to comment
trurl Posted December 18, 2020 Share Posted December 18, 2020 3 minutes ago, tallbill said: Media folder on my Unraid Array is /mnt/User/Plex In case this isn't a typo I thought you should be made aware that linux is case-sensitive. A user share named Plex is at /mnt/user/Plex. The path /mnt/User/Plex would actually be some newly created folder that isn't mounted storage and so would be in RAM like the rest of the Unraid OS. So you might check all your path specifications and make sure you have the correct upper/lower case everywhere. Also this post from the Docker FAQ may be relevant: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.