alboainain Posted January 15, 2017 Share Posted January 15, 2017 i just add new 10bg card to the server the pc i drop files from the speed is 177mb max some time 400mb but drop down to 80 or 50 that back 177 than 80 and i do the host file in win and ssd cache working can some one help me plz Link to comment
1812 Posted January 15, 2017 Share Posted January 15, 2017 are both drives on each side of the transmission SSD's? are you running multiple drives in you SSD cache? are you looking at network speed or read/write speed to determine those numbers? Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 are both drives on each side of the transmission SSD's? Yes are you running multiple drives in you SSD cache? no just one are you looking at network speed or read/write speed to determine those numbers? yes Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 start @ 496mb than drop to 177 and stay at this speed to the end the other screen from 400 dtop to 35 Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 Couple things that can make a difference, change mtu to 9000 and make sure you regularly trim the SSDs. Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 That may also be the SSD maximum sustained write speed, model? Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 That may also be the SSD maximum sustained write speed, model? ADATA_SP550_2G3820066918 - 240 GB (sdb) Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 That SSD uses TLC nand, those speeds are normal, get one with MLC or 3D TLC. Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 Couple things that can make a difference, change mtu to 9000 and make sure you regularly trim the SSDs. done Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 That SSD uses TLC nand, those speeds are normal, get one with MLC or 3D TLC. its say in amazon 500mb read and writes Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 That SSD uses TLC nand, those speeds are normal, get one with MLC or 3D TLC. Capacity: 240GB Sequential reads/writes up to 560 / 510 MB/s Advanced LDPC ECC Technology RAID Engine & Data Shaping for ultimate protection Intelligent SLC Caching for improved performance High TBW (Total Bytes Written) for extended drive longevity DDR3 DRAM Cache Buffer DEVSLP (Device Sleep) supported Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 The important part is up to, it's not sustained write speed. Link to comment
alboainain Posted January 15, 2017 Author Share Posted January 15, 2017 The important part is up to, it's not sustained write speed. ok i am with u to change it but why start at 400 and drop to 50mb and some time stable at 177mb . Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 Because it uses faster SLC as cache, but it's small and when it fills and starts using TLC it slows down, get a 850 Evo, the 250gb model can sustain 300gb/s writes and the 500gb model 500gb/s. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.