RJ59 Posted December 5, 2019 Share Posted December 5, 2019 1 hour ago, bastl said: @RJ59 Put the following in the "go" file on your Unraid USB flash stick under config and reboot your server #!/bin/bash # Start the Management Utility /usr/local/sbin/zenstates --c6-disable /usr/local/sbin/emhttp & It looks like this solution is working. I keep my fingers crossed and will wait for 24 hours if it lasts. Thank you very much! Quote Link to comment
Cliff Posted March 11, 2020 Share Posted March 11, 2020 (edited) Is there any USB PCIe x1 card that have multiple usb controllers ? So that I can add one card but passthrough two groups of usb slots to two different VM's ? I have only found the Sonnet "Allegro Pro USB 3.0" that have multiple controllers and works in unraid. But it is PCIe x4 Edited March 13, 2020 by Cliff Quote Link to comment
Abdo Posted March 24, 2020 Share Posted March 24, 2020 On 2/2/2018 at 9:28 PM, CHBMB said: USB Card roundup for Windows 10 and High Sierra Virtual Machine Use 1st Card - AUKEY 4 Ports PCI-E To USB 3.0 Expansion Card Chipset: VL805 Findings: Got an error in my syslog during boot and card was unable to be used either natively in Linux or passed through to Windows or OSX VM 2nd Card - Anker Uspeed PCI-E to USB 3.0 2-Port Express Card Chipset: VL805 Findings: Got an error in my syslog during boot and card was unable to be used either natively in Linux or passed through to Windows or OSX VM 3rd Card - Sienoc USB3.0 7Port PCI Express Card Chipset: - Renesas D720201 Findings: Worked natively in Linux or passed through to Windows, but not detected by OSX VM 4th Card - Inateck KTU3FR-5O2I Chipset: Fresco FL1100 Findings: Worked natively in Linux, and worked beautifully in Windows or OSX VMs, able to use my hardware KVM switch with either, but unable to power my server off with the card plugged in, as soon as it powered off, it powered on again. @aptalca has had the same issue with a Fresco FL1100 card and we both have Supermicro motherboards. 5th Card - ORICO USB3.0 4 Port PCI Express to USB3.0 Host Controller Card (PME-4U) Chipset: Fresco FL1100 Findings: Worked natively in Linux, and worked beautifully in Windows or OSX VMs, able to use my hardware KVM switch with either, but unable to power my server off with the card plugged in, as soon as it powered off, it powered on again. @aptalca has had the same issue with a Fresco FL1100 card and we both have Supermicro motherboards. I ordered this one to try and exclude the possibility it was an inherent Inateck fault, but after testing this one, I think we can conclude there is an issue with the FL1100 chipset and Supermicro boards. 6th Card - KALEA-INFORMATIQUE Controller Card PCI Express (PCI-E) to 3.1 USB Chipset: Asmedia ASM1142 Findings: Success!! Works in Windows 10, works in OSX natively both, without installing extra drivers, allows my server to powerdown and stay down. Other possibilities: Well I'm running out of chipsets to try, only thing I could consider is an expensive Sonnet card which uses the Fresco FL1100 chipset but had four controllers on the card which can in theory be split amongst VMs so one controller to each VM. I don't hold out much hope this will actually work well given it's got four of the damned chips that won't let me powerdown in the first place. One other thing I did try was using the Renesas based chipset to boot from and passed through my native USB ports, that didn't work well. Not sure why, but I might investigate that a bit more if I have no other options. Conclusion If youi've got a Supermicro motherboard, then Asmedia ASM1142 based USB cards are the way to go, for any other motherboard, then either the Asmedia ASM1142 chipset or the more common Fresco Logic FL1100 based cards would be fine, but if you notice that you have issues with powering down, the card may well be the culprit and try an Asmedia card instead. It's been..... emotional Thank you very much for the valuable information. I plan to set up a MAC and Windows VMs on my unraid server and this is very valuable. I plan to get x570 aorus master mother board and use Asmedia ASM1142 usb card since it seems to have the least amount of problems. However the listing you linked doesn't have international shipping, but this one does and it uses the same chipset. Do you think it would work similar to the kamelar controller card since it uses the same chipset? https://www.ebay.com/itm/SIIG-USB-3-1-2-Port-PCIe-3-0-Host-Adapter-1x-Type-A-10Gb-s-JU-P20B12-S1/132839040135?epid=1840656469&hash=item1eedd2e487:g:aZAAAOSwVRBb2Phx Thanks for advance. Quote Link to comment
TurkeyPerson Posted July 28, 2020 Share Posted July 28, 2020 Looking for a sound card that plays nicely and has SPDIF. Cheaper is better. The CM8888 chipset does NOT work (see post history). Anyone running something like this successfully? Quote Link to comment
JesterEE Posted January 29, 2022 Share Posted January 29, 2022 For anyone looking for a currently available FL1100 based USB Controller that works with Unraid, Linux and Windows 10 VMs (haven't tested a macOS VM) check out this one from YEELIYA. I haven't tested throughput to see what I can get out of it in a real-world test to really push the PCI-E 1x bus, but I have no issues with a keyboard, mouse, webcam and 2 USB sticks working simultaneously. Quote Link to comment
PeteyBoPetey Posted May 21, 2022 Share Posted May 21, 2022 ASUS X299-E II Excellent IOMMU groups, everything except the sound is in a separate group. 3 x USB controllers passed through to 3 separate VM's without problem. ASUS 2080ti Advanced Dual ASUS 2070 Super Dual Both passed through with multifunction='on' without problem Sonnet Alegro USB 3 Renesass USB 3 Gave up on these cards. Detected in Unraid, but code 10 when passed through to windows 10 VM Edimax Bluetooth 5.0 Dongle Got code 43. Resolved by unplugging all other usb devices and installed driver from manufacturers website. Works fine Creative Sound Blaster X3 Works passed through and natively Quote Link to comment
astronax Posted May 25, 2022 Share Posted May 25, 2022 On 5/21/2022 at 3:47 PM, PeteyBoPetey said: Sonnet Alegro USB 3 Renesass USB 3 Gave up on these cards. Detected in Unraid, but code 10 when passed through to windows 10 VM you may try the solution from it sounds like the same issure regarding an usb device having error code 10, which was resolved in this thread Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.