February 13, 20179 yr Would 850w be enough for two gpu's and 20 wd red drives? Depends on the GPUs. If you tell us which, we might be able to answer better. Hard drives doesn't draw that much power, but your dual CPU is 120w a piece I think.
February 13, 20179 yr Would 850w be enough for two gpu's and 20 wd red drives? Yes, unless you're using VERY high-end graphics cards.
February 13, 20179 yr Author Would 850w be enough for two gpu's and 20 wd red drives? Yes, unless you're using VERY high-end graphics cards. I'm using dual 1080's. Would this PSU be fine: https://www.amazon.com/dp/B004ETEFTK/ref=cm_sw_r_cp_api_cZFOybZ2XRAPH
February 13, 20179 yr Would 850w be enough for two gpu's and 20 wd red drives? Yes, unless you're using VERY high-end graphics cards. I'm using dual 1080's. Would this PSU be fine: https://www.amazon.com/dp/B004ETEFTK/ref=cm_sw_r_cp_api_cZFOybZ2XRAPH I would suggest you google PSU calculator and add your hardware. Outervision PSU calculator suggest you use a 1000w PSU...
February 13, 20179 yr Author Would 850w be enough for two gpu's and 20 wd red drives? Yes, unless you're using VERY high-end graphics cards. I'm using dual 1080's. Would this PSU be fine: https://www.amazon.com/dp/B004ETEFTK/ref=cm_sw_r_cp_api_cZFOybZ2XRAPH I would suggest you google PSU calculator and add your hardware. Outervision PSU calculator suggest you use a 1000w PSU... I ordered it for now. Just want to make sure the PSU is not the issue. I can always return/exchange it once I figure out what the issue is.
February 13, 20179 yr I think the Seasonic X-850 is fine for your system. Although the 1080 specs recommend a 500w power supply, that does NOT mean you need twice that for 2 of them. The card itself only draws 180w ... the 500w recommendation is to ensure there's adequate power for the rest of the system. So with 2 of them, you'd need 500w + 180 w = 680w to meet NVidia's recommendation. You need somewhat more due to your dual CPU's and the number of hard drives you have; but I'd be comfortable with a high-quality 850w unit like the X series.
February 14, 20179 yr Author I think the Seasonic X-850 is fine for your system. Although the 1080 specs recommend a 500w power supply, that does NOT mean you need twice that for 2 of them. The card itself only draws 180w ... the 500w recommendation is to ensure there's adequate power for the rest of the system. So with 2 of them, you'd need 500w + 180 w = 680w to meet NVidia's recommendation. You need somewhat more due to your dual CPU's and the number of hard drives you have; but I'd be comfortable with a high-quality 850w unit like the X series. Thanks. If it ends up being the PSU the problem (hopefully) then i'm going to exchange The one i ordered for the new Seasonic 850 titanium or the 1050w platinum.
February 14, 20179 yr Author Alright, i'm conpletely clueless. Right now the issue is not the PSU or CPU. Tested two 2670 CPU's and it does the same thing. I tried booting it up without the memory and same thing at this point i have no clue what's the issue.
February 14, 20179 yr Email Supermicro tech support back and tell them what you are doing and that its not working, see if they can offer some suggestions. Its tough though because they didn't use your CPU's or RAM, but I can't see how those would be the problem, but you never know.
February 14, 20179 yr Author Email Supermicro tech support back and tell them what you are doing and that its not working, see if they can offer some suggestions. Its tough though because they didn't use your CPU's or RAM, but I can't see how those would be the problem, but you never know. Yeah I just emailed them back. I put new CPU's today so that's not the issue. I tried booting it up without ram and same thing. It should atleast post to notify me no ram is installed.
February 14, 20179 yr Email Supermicro tech support back and tell them what you are doing and that its not working, see if they can offer some suggestions. Its tough though because they didn't use your CPU's or RAM, but I can't see how those would be the problem, but you never know. Yeah I just emailed them back. I put new CPU's today so that's not the issue. I tried booting it up without ram and same thing. It should atleast post to notify me no ram is installed. No, it wont post. But it will beep without proper RAM.
February 14, 20179 yr And you are 100% sure that you aren't forgetting to plug a power cable into the motherboard or something simple like that? Sometimes when you get so into a problem like this you can overlook silly boneheaded things, no offence meant.
February 14, 20179 yr Have you tried force flashing the BIOS as described here: https://forums.servethehome.com/index.php?threads/x9dr7-ln4f-boot-hang.6133/
February 14, 20179 yr Did you plug the CPU fans to the CPU fan headers and if using 3 pin fans, to the correct pins?
February 14, 20179 yr Have you tried force flashing the BIOS as described here: https://forums.servethehome.com/index.php?threads/x9dr7-ln4f-boot-hang.6133/ Since supermicro tested the board to work I don't think that is the problem.
February 14, 20179 yr Author Email Supermicro tech support back and tell them what you are doing and that its not working, see if they can offer some suggestions. Its tough though because they didn't use your CPU's or RAM, but I can't see how those would be the problem, but you never know. Yeah I just emailed them back. I put new CPU's today so that's not the issue. I tried booting it up without ram and same thing. It should atleast post to notify me no ram is installed. No, it wont post. But it will beep without proper RAM. It does not beep either.
February 14, 20179 yr ... It does not beep either. Does the board have a speaker onboard, or just a header for one? Many current motherboards do NOT have a built-in speaker, so you won't hear a beep unless you've connected one. [e.g. https://www.newegg.com/Product/Product.aspx?Item=9SIA9EN4WW2346&ignorebbr=1&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-HI+-+Misc+Hardware-_-9SIA9EN4WW2346&gclid=CLil6LLlkNICFYSEaQodLkEMEw&gclsrc=aw.ds ]
February 14, 20179 yr Author And you are 100% sure that you aren't forgetting to plug a power cable into the motherboard or something simple like that? Sometimes when you get so into a problem like this you can overlook silly boneheaded things, no offence meant. Yeah i connected everything but here is a photo just incase lol
February 15, 20179 yr ... Tested two 2670 CPU's and it does the same thing. Were these the same 2 CPU's that were in it when you had the shorting issue with the extra standoff?
February 15, 20179 yr Author Have you tried force flashing the BIOS as described here: https://forums.servethehome.com/index.php?threads/x9dr7-ln4f-boot-hang.6133/ I'm not sure if that's needed. Supermicro sent the board back to me saying nothing is wrong with it. They even updated it to latest BIOS, SAS and IPMi firmware.
February 15, 20179 yr Author ... It does not beep either. Does the board have a speaker onboard, or just a header for one? Many current motherboards do NOT have a built-in speaker, so you won't hear a beep unless you've connected one. [e.g. https://www.newegg.com/Product/Product.aspx?Item=9SIA9EN4WW2346&ignorebbr=1&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-HI+-+Misc+Hardware-_-9SIA9EN4WW2346&gclid=CLil6LLlkNICFYSEaQodLkEMEw&gclsrc=aw.ds ] It does have a speaker. It used to beep before when i would turn it on and it would post.
February 15, 20179 yr The motherboard is missing its battery, the circular one about the size of a quarter, did you remove it?
February 15, 20179 yr Author ... Tested two 2670 CPU's and it does the same thing. Were these the same 2 CPU's that were in it when you had the shorting issue with the extra standoff? Nope, I bought these today. The board had dual E5-2680's
February 15, 20179 yr Author The motherboard is missing its battery, the circular one about the size of a quarter, did you remove it? Yes i removed it before taking the photo. I'm doing some diagnostics supermicro tech support is asking me to do and that was part of it. Removing the battery lol
February 15, 20179 yr The motherboard is missing its battery, the circular one about the size of a quarter, did you remove it? Yes i removed it before taking the photo. I'm doing some diagnostics supermicro tech support is asking me to do and that was part of it. Removing the battery lol Removing the battery (and unplugging the power supply) is a good way to force a complete CMOS clear -- I suspect that's what SuperMicro is having you do at the moment.
Archived
This topic is now archived and is closed to further replies.