I installed a new, smaller, SSD to my array. The clearing process completes, the blue square appears and it is listed in individual shares to include/exclude. However, it is not listed as a Disk Share.

 

Every time the system is rebooted I am told it will be cleared again. The table fields next to the disk are blank for: FS, Size, Used, Free, and View.

 

What am I doing wrong?

 

Log.txt

Log is showing a lot of ata errors for the SSD, try with a new cable.

 

Feb 10 10:29:45 Galactica kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Feb 10 10:29:45 Galactica kernel: ata7.00: irq_stat 0x40000001
Feb 10 10:29:45 Galactica kernel: ata7.00: failed command: READ DMA
Feb 10 10:29:45 Galactica kernel: ata7.00: cmd c8/00:90:c0:00:00/00:00:00:00:00/e0 tag 28 dma 73728 in
Feb 10 10:29:45 Galactica kernel:         res 51/84:90:c0:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Feb 10 10:29:45 Galactica kernel: ata7.00: status: { DRDY ERR }
Feb 10 10:29:45 Galactica kernel: ata7.00: error: { ICRC ABRT }
Feb 10 10:29:45 Galactica kernel: ata7: hard resetting link
Feb 10 10:29:45 Galactica kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
Feb 10 10:29:45 Galactica kernel: ata7.00: configured for UDMA/133
Feb 10 10:29:45 Galactica kernel: ata7: EH complete
Feb 10 10:29:45 Galactica kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Feb 10 10:29:45 Galactica kernel: ata7.00: irq_stat 0x40000001
Feb 10 10:29:45 Galactica kernel: ata7.00: failed command: READ DMA
Feb 10 10:29:45 Galactica kernel: ata7.00: cmd c8/00:90:c0:00:00/00:00:00:00:00/e0 tag 30 dma 73728 in
Feb 10 10:29:45 Galactica kernel:         res 51/84:90:c0:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
Feb 10 10:29:45 Galactica kernel: ata7.00: status: { DRDY ERR }
Feb 10 10:29:45 Galactica kernel: ata7.00: error: { ICRC ABRT }
Feb 10 10:29:45 Galactica kernel: ata7: hard resetting link
Feb 10 10:29:45 Galactica kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
Feb 10 10:29:45 Galactica kernel: ata7.00: configured for UDMA/133
Feb 10 10:29:45 Galactica kernel: ata7: EH complete
Feb 10 10:29:45 Galactica kernel: ata7.00: limiting speed to UDMA/100:PIO4
Feb 10 10:29:45 Galactica kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Feb 10 10:29:45 Galactica kernel: ata7.00: irq_stat 0x40000001
Feb 10 10:29:45 Galactica kernel: ata7.00: failed command: READ DMA EXT
Feb 10 10:29:45 Galactica kernel: ata7.00: cmd 25/00:00:40:34:e4/00:01:37:00:00/e0 tag 9 dma 131072 in
Feb 10 10:29:45 Galactica kernel:         res 51/84:00:40:34:e4/00:01:37:00:00/e0 Emask 0x10 (ATA bus error)
Feb 10 10:29:45 Galactica kernel: ata7.00: status: { DRDY ERR }
Feb 10 10:29:45 Galactica kernel: ata7.00: error: { ICRC ABRT }
Feb 10 10:29:45 Galactica kernel: ata7: hard resetting link
Feb 10 10:29:46 Galactica kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
Feb 10 10:29:46 Galactica kernel: ata7.00: configured for UDMA/100
Feb 10 10:29:46 Galactica kernel: ata7: EH complete

Thank you for the quick reply. I moved everything off that card and it seems to be working fine, now.