February 24, 20179 yr I have this system setup on: Asus Rampage 3 Extreme Motherboard with 24Gb RAM Intel 980x Extreme Edition PCIe slot 1 is an nVidia Quadro K610 PCIe slot 2 is an AMD R9 290x PCIe slot 3 is an nVidia GTX 960 It looks like all my GPUs are in different groups, but no matter what I do / try I always get this error, or similar based on which GPU group I'm trying to passthrough to the VM internal error: qemu unexpectedly closed the monitor: 2017-02-24T21:24:15.991544Z qemu-system-x86_64: -device vfio-pci,host=04:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: vfio: failed to set iommu for container: Operation not permitted2017-02-24T21:24:15.991572Z qemu-system-x86_64: -device vfio-pci,host=04:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: vfio: failed to setup container for group 172017-02-24T21:24:15.991577Z qemu-system-x86_64: -device vfio-pci,host=04:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: vfio: failed to get group 172017-02-24T21:24:15.991591Z qemu-system-x86_64: -device vfio-pci,host=04:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: Device initialization failed And this is what is listed for my groups: IOMMU group 0 [8086:3405] 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) IOMMU group 1 [8086:3408] 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) IOMMU group 2 [8086:3409] 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) IOMMU group 3 [8086:340a] 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) IOMMU group 4 [8086:340c] 00:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 13) IOMMU group 5 [8086:340e] 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) IOMMU group 6 [8086:342e] 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) [8086:3422] 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) [8086:3423] 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) [8086:3438] 00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers (rev 13) IOMMU group 7 [8086:10ce] 00:19.0 Ethernet controller: Intel Corporation 82567V-2 Gigabit Network Connection IOMMU group 8 [8086:3a37] 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a38] 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a39] 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a3c] 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 IOMMU group 9 [8086:3a3e] 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller IOMMU group 10 [8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a48] 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [197b:2363] 06:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) [197b:2363] 06:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) IOMMU group 11 [8086:3a34] 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a35] 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a36] 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a3a] 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 IOMMU group 12 [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) [1106:3044] 08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) IOMMU group 13 [8086:3a16] 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a22] 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a30] 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller IOMMU group 14 [1b4b:9123] 01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 11) IOMMU group 15 [1033:0194] 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) IOMMU group 16 [10de:13bb] 03:00.0 VGA compatible controller: NVIDIA Corporation GM107GL [Quadro K620] (rev a2) [10de:0fbc] 03:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1) IOMMU group 17 [1002:67b0] 04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:aac8] 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] IOMMU group 18 [10de:1401] 05:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1) [10de:0fba] 05:00.1 Audio device: NVIDIA Corporation Device 0fba (rev a1) IOMMU group 19 [8086:2c71] ff:00.0 Host bridge: Intel Corporation Device 2c71 (rev 02) [8086:2d81] ff:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02) IOMMU group 20 [8086:2d90] ff:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02) [8086:2d91] ff:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02) [8086:2d92] ff:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02) [8086:2d93] ff:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02) IOMMU group 21 [8086:2d98] ff:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02) [8086:2d99] ff:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02) [8086:2d9c] ff:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02) IOMMU group 22 [8086:2da0] ff:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02) [8086:2da1] ff:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02) [8086:2da2] ff:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02) [8086:2da3] ff:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02) IOMMU group 23 [8086:2da8] ff:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02) [8086:2da9] ff:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02) [8086:2daa] ff:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02) [8086:2dab] ff:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02) IOMMU group 24 [8086:2db0] ff:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02) [8086:2db1] ff:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02) [8086:2db2] ff:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02) [8086:2db3] ff:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02) Does anyone have any suggestions on this?
February 24, 20179 yr Author Done that as well. Also tried that PCIe passthrough setting in VM Manager settings. Nothing seems to be working. I've even gone through all the combinations of the different VM types, as well as BIOS types. It's starting to make me sad. I would love to get this going and bring just 1 system to the next LAN party for myself and my son to use.
February 25, 20179 yr If your system doesn't support interrupt remapping, you can allow unsafe interrupts to occur. You may need to modify the following in syslinux.cfg append vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot
February 26, 20179 yr Author Still the exact same thing. It's quite possible my Mobo is too old to support this system.
Archived
This topic is now archived and is closed to further replies.