southpaw5271 Posted February 28, 2017 Share Posted February 28, 2017 (edited) I just got an old Dell Poweredge 6800 for free last week and I want to run a second unraid server on it. I have it booted and I can view the webpage for configuring, but I cannot see my hard drives anywhere here. The server uses SCSI drives and they all connect to the stock backplane. Here is a link to the product PDF on dell.com: http://www.dell.com/downloads/emea/products/pedge/pe6800.pdf The controller is listed as: SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08) Is there something I need to do in order to see the hard drives? Edited February 28, 2017 by southpaw5271 Quote Link to comment
earthworm Posted February 28, 2017 Share Posted February 28, 2017 (edited) I don't think unRAID can see SCSI disks but you can try going into the controller's bios and creating a single disk RAID 0 for each of the hard drives...unless there's a JBOD option. Or you can do what I did and get a cheap PCI-X SATA RAID card and start acquiring SATA disks. Edited February 28, 2017 by earthworm Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.